From: Antti Laakso <antti.laakso@linux.intel.com>
To: Dan Scally <dan.scally@ideasonboard.com>
Cc: linux-media@vger.kernel.org, linux-gpio@vger.kernel.org,
platform-driver-x86@vger.kernel.org, linusw@kernel.org,
brgl@kernel.org, sakari.ailus@linux.intel.com,
mchehab@kernel.org, hansg@kernel.org,
ilpo.jarvinen@linux.intel.com, hverkuil+cisco@kernel.org,
sre@kernel.org, hao.yao@intel.com, jimmy.su@intel.com,
miguel.vadillo@intel.com, kees@kernel.org, ribalda@chromium.org
Subject: Re: [PATCH 5/5] platform: int3472: Add MSI prestige board data
Date: Wed, 11 Mar 2026 13:20:56 +0200 [thread overview]
Message-ID: <abFQGE0N3Ulgcn1I@alaakso-DESK> (raw)
In-Reply-To: <db7b4eeb-1054-4b7c-9f91-810be504124d@ideasonboard.com>
Thanks for review Dan,
On Tue, Mar 10, 2026 at 02:32:56PM +0000, Dan Scally wrote:
> Hi Antti
>
> On 10/03/2026 12:44, Antti Laakso wrote:
> > Define regulators and gpios for MSI Prestige 14 AI EVO+ laptop.
> >
> > Signed-off-by: Antti Laakso <antti.laakso@linux.intel.com>
> > ---
> > .../x86/intel/int3472/tps68470_board_data.c | 97 +++++++++++++++++++
> > 1 file changed, 97 insertions(+)
> >
> > diff --git a/drivers/platform/x86/intel/int3472/tps68470_board_data.c b/drivers/platform/x86/intel/int3472/tps68470_board_data.c
> > index 71357a036292..fe7c23e72d66 100644
> > --- a/drivers/platform/x86/intel/int3472/tps68470_board_data.c
> > +++ b/drivers/platform/x86/intel/int3472/tps68470_board_data.c
> > @@ -232,6 +232,73 @@ static const struct tps68470_regulator_platform_data dell_7212_tps68470_pdata =
> > },
> > };
> > +/* Settings for MSI Prestige 14 laptop. */
> > +
> > +static struct regulator_consumer_supply ovti5675_avdd_consumer_supplies[] = {
> > + REGULATOR_SUPPLY("avdd", "i2c-OVTI5675:00"),
> > +};
> > +
> > +static struct regulator_consumer_supply ovti5675_dovdd_consumer_supplies[] = {
> > + REGULATOR_SUPPLY("dovdd", "i2c-OVTI5675:00"),
> > +};
> > +
> > +static struct regulator_consumer_supply ovti5675_dvdd_consumer_supplies[] = {
> > + REGULATOR_SUPPLY("dvdd", "i2c-OVTI5675:00"),
> > +};
> > +
> > +static const struct regulator_init_data msi_p14_ai_evo_tps68470_core_reg_init_data = {
> > + .constraints = {
> > + .min_uV = 1200000,
> > + .max_uV = 1200000,
> > + .apply_uV = 1,
> > + .valid_ops_mask = REGULATOR_CHANGE_STATUS,
> > + },
> > + .num_consumer_supplies = ARRAY_SIZE(ovti5675_dvdd_consumer_supplies),
> > + .consumer_supplies = ovti5675_dvdd_consumer_supplies,
> > +};
> > +
> > +static const struct regulator_init_data msi_p14_ai_evo_tps68470_ana_reg_init_data = {
> > + .constraints = {
> > + .min_uV = 2815200,
> > + .max_uV = 2815200,
> > + .apply_uV = 1,
> > + .valid_ops_mask = REGULATOR_CHANGE_STATUS,
> > + },
> > + .num_consumer_supplies = ARRAY_SIZE(ovti5675_avdd_consumer_supplies),
> > + .consumer_supplies = ovti5675_avdd_consumer_supplies,
> > +};
> > +
> > +static const struct regulator_init_data msi_p14_ai_evo_tps68470_vio_reg_init_data = {
> > + .constraints = {
> > + .min_uV = 1800600,
> > + .max_uV = 1800600,
> > + .apply_uV = 1,
> > + .valid_ops_mask = REGULATOR_CHANGE_STATUS,
> > + },
> > + .num_consumer_supplies = 0,
> > + .consumer_supplies = NULL,
> > +};
> > +
> > +static const struct regulator_init_data msi_p14_ai_evo_tps68470_vsio_reg_init_data = {
> > + .constraints = {
> > + .min_uV = 1800600,
> > + .max_uV = 1800600,
> > + .apply_uV = 1,
> > + .valid_ops_mask = REGULATOR_CHANGE_STATUS,
> > + },
> > + .num_consumer_supplies = ARRAY_SIZE(ovti5675_dovdd_consumer_supplies),
> > + .consumer_supplies = ovti5675_dovdd_consumer_supplies,
> > +};
> > +
> > +static const struct tps68470_regulator_platform_data msi_p14_ai_evo_tps68470_pdata = {
> > + .reg_init_data = {
> > + [TPS68470_CORE] = &msi_p14_ai_evo_tps68470_core_reg_init_data,
> > + [TPS68470_ANA] = &msi_p14_ai_evo_tps68470_ana_reg_init_data,
> > + [TPS68470_VIO] = &msi_p14_ai_evo_tps68470_vio_reg_init_data,
> > + [TPS68470_VSIO] = &msi_p14_ai_evo_tps68470_vsio_reg_init_data,
> > + },
> > +};
> > +
> > static struct gpiod_lookup_table surface_go_int347a_gpios = {
> > .dev_id = "i2c-INT347A:00",
> > .table = {
> > @@ -258,6 +325,19 @@ static struct gpiod_lookup_table dell_7212_int3479_gpios = {
> > }
> > };
> > +static struct gpiod_lookup_table msi_p14_ai_evo_ovti5675_gpios = {
> > + .dev_id = "i2c-OVTI5675:00",
> > + .table = {
> > + GPIO_LOOKUP_IDX("tps68470-gpio", 9, "reset", 0, GPIO_ACTIVE_LOW),
> > + GPIO_LOOKUP_IDX("tps68470-gpio", 7, "reset", 1, GPIO_ACTIVE_LOW),
>
> The ov5675 driver seems only to look for a single gpio, so I think the
> second entry would never be accessed here...should there be an accompanying
> driver change?
>
> Thanks
> Dan
Yes, the gpio 7 is not needed. I'll fix it for v2.
> > + { }
> > + }
> > +};
> > +
> > +static const struct tps68470_gpio_platform_data msi_p14_ai_evo_tps68470_gpio_pdata = {
> > + .daisy_chain_enable = true,
> > +};
> > +
> > static const struct int3472_tps68470_board_data surface_go_tps68470_board_data = {
> > .dev_name = "i2c-INT3472:05",
> > .tps68470_regulator_pdata = &surface_go_tps68470_pdata,
> > @@ -287,6 +367,16 @@ static const struct int3472_tps68470_board_data dell_7212_tps68470_board_data =
> > },
> > };
> > +static const struct int3472_tps68470_board_data msi_p14_ai_evo_tps68470_board_data = {
> > + .dev_name = "i2c-INT3472:06",
> > + .tps68470_regulator_pdata = &msi_p14_ai_evo_tps68470_pdata,
> > + .tps68470_gpio_pdata = &msi_p14_ai_evo_tps68470_gpio_pdata,
> > + .n_gpiod_lookups = 1,
> > + .tps68470_gpio_lookup_tables = {
> > + &msi_p14_ai_evo_ovti5675_gpios,
> > + },
> > +};
> > +
> > static const struct dmi_system_id int3472_tps68470_board_data_table[] = {
> > {
> > .matches = {
> > @@ -316,6 +406,13 @@ static const struct dmi_system_id int3472_tps68470_board_data_table[] = {
> > },
> > .driver_data = (void *)&dell_7212_tps68470_board_data,
> > },
> > + {
> > + .matches = {
> > + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Micro-Star International Co., Ltd."),
> > + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Prestige 14 AI+ Evo C2VMG"),
> > + },
> > + .driver_data = (void *)&msi_p14_ai_evo_tps68470_board_data,
> > + },
> > { }
> > };
>
prev parent reply other threads:[~2026-03-11 11:21 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-10 12:44 [PATCH 0/5] platform: int3472: Add MSI prestige 14 AI EVO data Antti Laakso
2026-03-10 12:44 ` [PATCH 1/5] media: i2c: ov5675: Wait for endpoint Antti Laakso
2026-03-10 13:03 ` Hans de Goede
2026-03-10 13:08 ` Sakari Ailus
2026-03-10 13:12 ` Hans de Goede
2026-03-10 12:44 ` [PATCH 2/5] media: ipu-bridge: Add ov5675 sensor Antti Laakso
2026-03-10 13:06 ` Hans de Goede
2026-03-10 13:25 ` Dan Scally
2026-03-10 12:44 ` [PATCH 3/5] platform: int3472: Add gpio platform data Antti Laakso
2026-03-10 13:06 ` Hans de Goede
2026-03-10 13:32 ` Bartosz Golaszewski
2026-03-11 11:17 ` Antti Laakso
2026-03-10 14:27 ` Dan Scally
2026-03-10 12:44 ` [PATCH 4/5] gpio: tps68470: Add i2c daisy chain support Antti Laakso
2026-03-10 13:07 ` Hans de Goede
2026-03-10 14:33 ` Dan Scally
2026-03-10 12:44 ` [PATCH 5/5] platform: int3472: Add MSI prestige board data Antti Laakso
2026-03-10 13:09 ` Hans de Goede
2026-03-10 13:17 ` Sakari Ailus
2026-03-10 14:24 ` Hans de Goede
2026-03-10 14:32 ` Dan Scally
2026-03-10 15:02 ` Hans de Goede
2026-03-11 11:20 ` Antti Laakso [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=abFQGE0N3Ulgcn1I@alaakso-DESK \
--to=antti.laakso@linux.intel.com \
--cc=brgl@kernel.org \
--cc=dan.scally@ideasonboard.com \
--cc=hansg@kernel.org \
--cc=hao.yao@intel.com \
--cc=hverkuil+cisco@kernel.org \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=jimmy.su@intel.com \
--cc=kees@kernel.org \
--cc=linusw@kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=miguel.vadillo@intel.com \
--cc=platform-driver-x86@vger.kernel.org \
--cc=ribalda@chromium.org \
--cc=sakari.ailus@linux.intel.com \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox