From: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
To: "Barnabás Pőcze" <barnabas.pocze@ideasonboard.com>
Cc: Jacopo Mondi <jacopo.mondi@ideasonboard.com>,
Anthony McGivern <anthony.mcgivern@arm.com>,
Vincenzo Frascino <vincenzo.frascino@arm.com>,
Nayden Kanchev <Nayden.Kanchev@arm.com>,
Konstantin Babin <Konstantin.Babin@arm.com>,
Daniel Scally <dan.scally@ideasonboard.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
stable@vger.kernel.org
Subject: Re: [PATCH 4/6] media: mali-c55: Fix Iridix bypass macros
Date: Fri, 13 Mar 2026 12:37:00 +0100 [thread overview]
Message-ID: <abP2maYiLNmnMFFr@zed> (raw)
In-Reply-To: <36f2247c-cfd5-46b4-a16d-1afc3a6504d8@ideasonboard.com>
On Fri, Mar 13, 2026 at 12:15:10PM +0100, Barnabás Pőcze wrote:
> 2026. 03. 13. 11:49 keltezéssel, Jacopo Mondi írta:
> > From: Daniel Scally <dan.scally@ideasonboard.com>
> >
> > The Mali C55 Iridix block has a digital gain function and tone mapping
> > function, whose enablement is controlled by two different bits
> > in the BYPASS_3 register.
> >
> > Unfortunately, the "Gain" and "Tonemap" bypass bit definitions are the
> > wrong way around. Swap them so that the ISP is now operated with the
> > "Iridix Gain" block enabled and default configured at a x1.0 gain and
> > with the "Iridix Tonemap" disabled, as it was originally intended.
>
> As far as I can see the current upstream driver does not bypass either of them,
> so swapping them will have no direct effect.
You're right, I swapped the patch order and in this version I sent out
this comes before the actual iridix bypass
>
>
> >
> > Cc: stable@vger.kernel.org
> > Fixes: 8ec187829a4c ("media: mali-c55: Fix Iridix bypass macros")
>
> Where is this commit? I cannot seem to find it.
Clearly, this doesn't make sense. I generated the fixes tag pointing
it to this patch. I'll fix, thanks.
>
>
> Reviewed-by: Barnabás Pőcze <barnabas.pocze@ideasonboard.com>
>
>
> > Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
> > Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
> > ---
> > drivers/media/platform/arm/mali-c55/mali-c55-registers.h | 4 ++--
> > 1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-registers.h b/drivers/media/platform/arm/mali-c55/mali-c55-registers.h
> > index f5a148add1c8..f098effde7b4 100644
> > --- a/drivers/media/platform/arm/mali-c55/mali-c55-registers.h
> > +++ b/drivers/media/platform/arm/mali-c55/mali-c55-registers.h
> > @@ -128,8 +128,8 @@ enum mali_c55_interrupts {
> > #define MALI_C55_REG_BYPASS_3_SENSOR_OFFSET_PRE_SH BIT(1)
> > #define MALI_C55_REG_BYPASS_3_MESH_SHADING BIT(3)
> > #define MALI_C55_REG_BYPASS_3_WHITE_BALANCE BIT(4)
> > -#define MALI_C55_REG_BYPASS_3_IRIDIX BIT(5)
> > -#define MALI_C55_REG_BYPASS_3_IRIDIX_GAIN BIT(6)
> > +#define MALI_C55_REG_BYPASS_3_IRIDIX_GAIN BIT(5)
> > +#define MALI_C55_REG_BYPASS_3_IRIDIX BIT(6)
> > #define MALI_C55_REG_BYPASS_4 0x18ec0
> > #define MALI_C55_REG_BYPASS_4_DEMOSAIC_RGB BIT(1)
> > #define MALI_C55_REG_BYPASS_4_PF_CORRECTION BIT(3)
> >
>
next prev parent reply other threads:[~2026-03-13 11:37 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-13 10:49 [PATCH 0/6] media: mali-c55: Fix ISP reset and blocks bypass Jacopo Mondi
2026-03-13 10:49 ` [PATCH 1/6] media: mali-c55: Fix wrong comment of ISP block types Jacopo Mondi
2026-03-13 11:26 ` Dan Scally
2026-03-13 10:49 ` [PATCH 2/6] media: mali-c55: Initialize the ISP in enable_streams() Jacopo Mondi
2026-03-13 10:49 ` [PATCH 3/6] media: mali-c55: Fully reset the ISP configuration Jacopo Mondi
2026-03-13 10:49 ` [PATCH 4/6] media: mali-c55: Fix Iridix bypass macros Jacopo Mondi
2026-03-13 11:15 ` Barnabás Pőcze
2026-03-13 11:37 ` Jacopo Mondi [this message]
2026-03-13 10:49 ` [PATCH 5/6] media: mali-c55: Bypass the Iridix Tonemap engine Jacopo Mondi
2026-03-13 10:49 ` [PATCH 6/6] media: mali-c55: Bypass Purple Fringe Correction Jacopo Mondi
2026-03-13 11:15 ` Barnabás Pőcze
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=abP2maYiLNmnMFFr@zed \
--to=jacopo.mondi@ideasonboard.com \
--cc=Konstantin.Babin@arm.com \
--cc=Nayden.Kanchev@arm.com \
--cc=anthony.mcgivern@arm.com \
--cc=barnabas.pocze@ideasonboard.com \
--cc=dan.scally@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=stable@vger.kernel.org \
--cc=vincenzo.frascino@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox