Re: [PATCH 1/2] media: dt-bindings: i2c: Drop redundant endpoint properties

[Sakari Ailus <sakari.ailus@linux.intel.com>]

Hi Krzysztof, Laurent,

On Mon, Mar 16, 2026 at 03:42:09PM +0100, Krzysztof Kozlowski wrote:
> On 16/03/2026 14:53, Laurent Pinchart wrote:
> > Hello Krzysztof,
> > 
> > Thank you for the patch.
> > 
> > On Mon, Mar 16, 2026 at 02:45:34PM +0100, Krzysztof Kozlowski wrote:
> >> The "endpoint" node references video-interfaces.yaml schema with
> >> "unevaluatedProperties: false" which means that all properties from
> >> referenced schema apply.  Listing some of them with ": true" is simply
> >> redundant and does not make this code easier to read.
> > 
> > I think you know my opinion on this topic. I believe we would be better
> > off by turning "unevaluatedProperties: false" into
> > "additionalProperties: false" here, and keeping the list of applicable
> > properties. It brings value to device tree authors by telling which
> > properties are applicable to the device at hand. For instance ... (see
> > below)
> 
> (let me trim)
> 
> >> diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5647.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5647.yaml
> >> index 2d7937a372a2..7a05a1eda58d 100644
> >> --- a/Documentation/devicetree/bindings/media/i2c/ovti,ov5647.yaml
> >> +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5647.yaml
> >> @@ -51,9 +51,6 @@ properties:
> >>          $ref: /schemas/media/video-interfaces.yaml#
> >>          unevaluatedProperties: false
> >>  
> >> -        properties:
> >> -          clock-noncontinuous: true
> >> -
> > 
> > ... Without this, an integrator will need to dive into driver code to
> > know if non-continuous clock is usable for the device.
> 
> I see. Our usual interpretation of common schema, expressed by @Rob in
> few places, that eventually all properties might be applicable. This
> applies especially for ABI tied to the core Linux specifics, e.g.
> rotation and orientation from video-interface-devices.yaml.
> 
> Absolutely every sensor can be mounted rotated, therefore every binding
> referencing video-interface-devices should allow it, even if driver is
> not using it. Because basically that's the ABI we want to define for
> each sensor, thus each binding referencing common schema should have
> "unevaluatedProps: true" without listing them.
> 
> Similarly touchscreen.yaml.
> 
> OTOH, second option, properties which are strictly hardware, e.g. name
> of power supply or whether clock has or has not non-continuous mode,
> should be allowed only when they match the hardware. Such bindings
> should use "additionalProperties: false" so the hardware description is
> constrained/fixed/specific.

The patch may be technically correct but I'm afraid it won't improve the
bindings but rather the opposite: it removes information telling whether a
property is relevant for a given device.

I bet there are a lot of possibilities to write invalid DTS while the
checker says it's fine (missing data-lanes or link-frequencies, for
instance). That may have been the case before the patch but I'd make
properties a driver needs to function mandatory rather than removing them
from bindings altogether.

It'd been on my to-do list to split the current video-interfaces.yaml into
several files: generic camera sensor properties, CSI-2 interface
properties, DVP/Bt.656 interface properties and the rest (full list
probably requires more thought). That way we could only include properties
that are relevant for the device without necessarily listing each one for
all bindings.

I'd also continue to list boolean properties relevant for devices as well
as other properties that are relevant for a device but not mandatory.

-- 
Regards,

Sakari Ailus