Linux Media Controller development
 help / color / mirror / Atom feed
From: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
To: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Cc: tomm.merciai@gmail.com, linux-renesas-soc@vger.kernel.org,
	 biju.das.jz@bp.renesas.com,
	Sakari Ailus <sakari.ailus@linux.intel.com>,
	 Mauro Carvalho Chehab <mchehab@kernel.org>,
	Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
	 Jacopo Mondi <jacopo.mondi@ideasonboard.com>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	 linux-media@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/9] media: rzg2l-cru: csi2: Add device_link from CSI-2 to sensor
Date: Mon, 27 Jul 2026 11:48:59 +0200	[thread overview]
Message-ID: <amcpMBZTD20M9cMZ@zed> (raw)
In-Reply-To: <20260616170542.447804-3-tommaso.merciai.xr@bp.renesas.com>

Hi Tommaso

On Tue, Jun 16, 2026 at 07:05:32PM +0200, Tommaso Merciai wrote:
> The CSI-2 receiver depends on its remote sensor being powered and
> configured before it can receive data. Without an explicit device_link
> the PM core has no knowledge of this dependency and may suspend the
> sensor while CSI-2 is still active, or resume CSI-2 before the sensor
> is ready.
>
> Add a DL_FLAG_STATELESS device_link from the CSI-2 device to the sensor
> device when the sensor subdev binds. This instructs the PM core to
> suspend CSI-2 before the sensor and to resume the sensor before CSI-2.
> The link is deleted on unbind.
>
> Move csi2->remote_source assignment to the end of the function.
>
> Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
> ---
>  .../platform/renesas/rzg2l-cru/rzg2l-csi2.c   | 24 +++++++++++++++----
>  1 file changed, 19 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-csi2.c b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-csi2.c
> index 6dc4b53607b4..3a4bc4ef72fc 100644
> --- a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-csi2.c
> +++ b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-csi2.c
> @@ -773,15 +773,28 @@ static int rzg2l_csi2_notify_bound(struct v4l2_async_notifier *notifier,
>  				   struct v4l2_async_connection *asd)
>  {
>  	struct rzg2l_csi2 *csi2 = notifier_to_csi2(notifier);
> +	int ret;
>
> -	csi2->remote_source = subdev;
> +	if (!device_link_add(csi2->dev, subdev->dev, DL_FLAG_STATELESS)) {

As cru-csi2 supports runtime suspend/resume, should you also add
DL_FLAG_PM_RUNTIME ?

> +		dev_err(csi2->dev, "Failed to create device link to sensor %s\n",
> +			subdev->name);
> +		return -EINVAL;
> +	}
>
>  	dev_dbg(csi2->dev, "Bound subdev: %s pad\n", subdev->name);
>
> -	return media_create_pad_link(&subdev->entity, RZG2L_CSI2_SINK,
> -				     &csi2->subdev.entity, 0,
> -				     MEDIA_LNK_FL_ENABLED |
> -				     MEDIA_LNK_FL_IMMUTABLE);
> +	ret = media_create_pad_link(&subdev->entity, RZG2L_CSI2_SINK,
> +				    &csi2->subdev.entity, 0,
> +				    MEDIA_LNK_FL_ENABLED |
> +				    MEDIA_LNK_FL_IMMUTABLE);
> +	if (ret) {
> +		device_link_remove(csi2->dev, subdev->dev);
> +		return ret;
> +	}
> +
> +	csi2->remote_source = subdev;
> +
> +	return 0;
>  }
>
>  static void rzg2l_csi2_notify_unbind(struct v4l2_async_notifier *notifier,
> @@ -790,6 +803,7 @@ static void rzg2l_csi2_notify_unbind(struct v4l2_async_notifier *notifier,
>  {
>  	struct rzg2l_csi2 *csi2 = notifier_to_csi2(notifier);
>
> +	device_link_remove(csi2->dev, subdev->dev);
>  	csi2->remote_source = NULL;
>
>  	dev_dbg(csi2->dev, "Unbind subdev %s\n", subdev->name);
> --
> 2.54.0
>

  reply	other threads:[~2026-07-27  9:49 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-16 17:05 [PATCH 0/9] media: rzg2l-cru: Add suspend/resume support Tommaso Merciai
2026-06-16 17:05 ` [PATCH 1/9] media: rzg2l-cru: Add device_link from CRU to CSI-2 Tommaso Merciai
2026-07-27  9:45   ` Jacopo Mondi
2026-07-27 15:02     ` Tommaso Merciai
2026-07-27  9:50   ` Jacopo Mondi
2026-07-27 15:17     ` Tommaso Merciai
2026-06-16 17:05 ` [PATCH 2/9] media: rzg2l-cru: csi2: Add device_link from CSI-2 to sensor Tommaso Merciai
2026-07-27  9:48   ` Jacopo Mondi [this message]
2026-07-27 15:41     ` Tommaso Merciai
2026-06-16 17:05 ` [PATCH 3/9] media: rzg2l-cru: Use bulk reset API in rzg2l_cru_start_streaming_vq() Tommaso Merciai
2026-07-27  9:55   ` Jacopo Mondi
2026-06-16 17:05 ` [PATCH 4/9] media: rzg2l-cru: Drop stop streaming function Tommaso Merciai
2026-07-27  9:55   ` Jacopo Mondi
2026-06-16 17:05 ` [PATCH 5/9] media: rzg2l-cru: Move active_slot reset into rzg2l_cru_set_stream() Tommaso Merciai
2026-07-27 10:11   ` Jacopo Mondi
2026-06-16 17:05 ` [PATCH 6/9] media: rzg2l-cru: Add suspend/resume support Tommaso Merciai
2026-07-27 10:20   ` Jacopo Mondi
2026-06-16 17:05 ` [PATCH 7/9] media: rzg2l-cru: csi2: Add system sleep PM support Tommaso Merciai
2026-06-16 17:05 ` [PATCH 8/9] media: i2c: ov5645: Switch to RUNTIME_PM_OPS() and pm_ptr() Tommaso Merciai
2026-06-16 17:05 ` [PATCH 9/9] media: i2c: ov5645: Add suspend/resume support Tommaso Merciai
2026-07-15  8:47 ` [PATCH 0/9] media: rzg2l-cru: " Tommaso Merciai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=amcpMBZTD20M9cMZ@zed \
    --to=jacopo.mondi@ideasonboard.com \
    --cc=biju.das.jz@bp.renesas.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
    --cc=sakari.ailus@linux.intel.com \
    --cc=tomm.merciai@gmail.com \
    --cc=tommaso.merciai.xr@bp.renesas.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox