From: Sean Young <sean@mess.org>
To: linux-media@vger.kernel.org
Subject: [PATCH 0/4] Generic Raspberry Pi IR transmitters
Date: Sun, 2 Jul 2017 12:06:07 +0100 [thread overview]
Message-ID: <cover.1498992850.git.sean@mess.org> (raw)
These drivers are generic, but they've been tested on Raspberry Pi.
Note that the gpio-ir-recv is a separate driver, so you will end up
with two /dev/lircN devices if you want a receiver and a transmitter,
whilst with the lirc_rpi driver you have one /dev/lircN device. I'm
not sure this is either a problem or how it could be solved.
With this in place, there is no reason to use the lirc_rpi any more.
Also note that it might be possible for the Nokia N900 to use the
pwm-ir-tx driver, making ir-rx51 obsolete. The pwm-ir-tx driver is
shorter and simpler.
Sean Young (4):
[media] rc-core: rename input_name to device_name
[media] rc: mce kbd decoder not needed for IR TX drivers
[media] rc: gpio-ir-tx: add new driver
[media] rc: pwm-ir-tx: add new driver
.../devicetree/bindings/leds/irled/gpio-ir-tx.txt | 11 ++
.../devicetree/bindings/leds/irled/pwm-ir-tx.txt | 13 ++
drivers/media/cec/cec-core.c | 4 +-
drivers/media/common/siano/smsir.c | 4 +-
drivers/media/i2c/ir-kbd-i2c.c | 2 +-
drivers/media/pci/bt8xx/bttv-input.c | 2 +-
drivers/media/pci/cx23885/cx23885-input.c | 2 +-
drivers/media/pci/cx88/cx88-input.c | 2 +-
drivers/media/pci/dm1105/dm1105.c | 2 +-
drivers/media/pci/mantis/mantis_common.h | 2 +-
drivers/media/pci/mantis/mantis_input.c | 4 +-
drivers/media/pci/saa7134/saa7134-input.c | 2 +-
drivers/media/pci/smipcie/smipcie-ir.c | 4 +-
drivers/media/pci/smipcie/smipcie.h | 2 +-
drivers/media/pci/ttpci/budget-ci.c | 2 +-
drivers/media/rc/Kconfig | 23 +++
drivers/media/rc/Makefile | 2 +
drivers/media/rc/ati_remote.c | 2 +-
drivers/media/rc/ene_ir.c | 4 +-
drivers/media/rc/fintek-cir.c | 2 +-
drivers/media/rc/gpio-ir-recv.c | 2 +-
drivers/media/rc/gpio-ir-tx.c | 189 +++++++++++++++++++++
drivers/media/rc/igorplugusb.c | 2 +-
drivers/media/rc/iguanair.c | 2 +-
drivers/media/rc/img-ir/img-ir-hw.c | 2 +-
drivers/media/rc/img-ir/img-ir-raw.c | 2 +-
drivers/media/rc/imon.c | 2 +-
drivers/media/rc/ir-hix5hd2.c | 2 +-
drivers/media/rc/ir-mce_kbd-decoder.c | 3 +
drivers/media/rc/ir-spi.c | 1 +
drivers/media/rc/ite-cir.c | 2 +-
drivers/media/rc/mceusb.c | 2 +-
drivers/media/rc/meson-ir.c | 2 +-
drivers/media/rc/mtk-cir.c | 2 +-
drivers/media/rc/nuvoton-cir.c | 2 +-
drivers/media/rc/pwm-ir-tx.c | 165 ++++++++++++++++++
drivers/media/rc/rc-loopback.c | 2 +-
drivers/media/rc/rc-main.c | 8 +-
drivers/media/rc/redrat3.c | 2 +-
drivers/media/rc/serial_ir.c | 10 +-
drivers/media/rc/sir_ir.c | 2 +-
drivers/media/rc/st_rc.c | 2 +-
drivers/media/rc/streamzap.c | 2 +-
drivers/media/rc/sunxi-cir.c | 2 +-
drivers/media/rc/ttusbir.c | 2 +-
drivers/media/rc/winbond-cir.c | 2 +-
drivers/media/usb/au0828/au0828-input.c | 2 +-
drivers/media/usb/dvb-usb-v2/dvb_usb_core.c | 5 +-
drivers/media/usb/dvb-usb/dvb-usb-remote.c | 2 +-
drivers/media/usb/em28xx/em28xx-input.c | 2 +-
drivers/media/usb/tm6000/tm6000-input.c | 2 +-
include/media/cec.h | 2 +-
include/media/rc-core.h | 6 +-
53 files changed, 467 insertions(+), 61 deletions(-)
create mode 100644 Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.txt
create mode 100644 Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.txt
create mode 100644 drivers/media/rc/gpio-ir-tx.c
create mode 100644 drivers/media/rc/pwm-ir-tx.c
--
2.9.4
next reply other threads:[~2017-07-02 11:06 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-02 11:06 Sean Young [this message]
2017-07-02 11:06 ` [PATCH 1/4] [media] rc-core: rename input_name to device_name Sean Young
2017-07-02 11:06 ` [PATCH 2/4] [media] rc: mce kbd decoder not needed for IR TX drivers Sean Young
2017-07-02 11:06 ` [PATCH 3/4] [media] rc: gpio-ir-tx: add new driver Sean Young
2017-07-07 13:58 ` Rob Herring
2017-07-02 11:06 ` [PATCH 4/4] [media] rc: pwm-ir-tx: " Sean Young
2017-07-04 12:58 ` Sean Young
2017-07-07 13:59 ` Rob Herring
2017-07-07 16:15 ` Pavel Machek
2017-07-10 15:12 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1498992850.git.sean@mess.org \
--to=sean@mess.org \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).