From: Jose Abreu <Jose.Abreu@synopsys.com>
To: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Jose Abreu <Jose.Abreu@synopsys.com>,
Carlos Palminha <CARLOS.PALMINHA@synopsys.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Hans Verkuil <hans.verkuil@cisco.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Sylwester Nawrocki <snawrocki@kernel.org>
Subject: [PATCH v7 0/6] Synopsys Designware HDMI Video Capture Controller + PHY
Date: Fri, 7 Jul 2017 12:08:03 +0100 [thread overview]
Message-ID: <cover.1499425271.git.joabreu@synopsys.com> (raw)
The Synopsys Designware HDMI RX controller is an HDMI receiver controller that
is responsible to process digital data that comes from a phy. The final result
is a stream of raw video data that can then be connected to a video DMA, for
example, and transfered into RAM so that it can be displayed.
The controller + phy available in this series natively support all HDMI 1.4 and
HDMI 2.0 modes, including deep color. Although, the driver is quite in its
initial stage and unfortunatelly only non deep color modes are supported. Also,
audio is not yet supported in the driver (the controller has several audio
output interfaces).
Version 7 addresses review comments from Sylwester Nawrocki regarding device tree
bindings and also makes edid-phandle property look for parent node if no node is
specified in the bindings.
I also added two patches for cec.h and cec-notifier.h which are needed to fix build
errors/warnings. At 1/6 we add a stub for cec_register_cec_notifier() and at 2/6
we forward the declaration of cec_notifier structure before including cec.h.
This series depends on the patch at [1].
This series was tested in a FPGA platform using an embedded platform called
ARC AXS101.
Jose Abreu (6):
[media] cec.h: Add stub function for cec_register_cec_notifier()
[media] cec-notifier.h: Prevent build warnings using forward
declaration
dt-bindings: media: Document Synopsys Designware HDMI RX
MAINTAINERS: Add entry for Synopsys Designware HDMI drivers
[media] platform: Add Synopsys Designware HDMI RX PHY e405 Driver
[media] platform: Add Synopsys Designware HDMI RX Controller Driver
Cc: Carlos Palminha <palminha@synopsys.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Sylwester Nawrocki <snawrocki@kernel.org>
[1] https://patchwork.linuxtv.org/patch/41834/
.../devicetree/bindings/media/snps,dw-hdmi-rx.txt | 74 +
MAINTAINERS | 7 +
drivers/media/platform/Kconfig | 2 +
drivers/media/platform/Makefile | 2 +
drivers/media/platform/dwc/Kconfig | 23 +
drivers/media/platform/dwc/Makefile | 2 +
drivers/media/platform/dwc/dw-hdmi-phy-e405.c | 844 +++++++++
drivers/media/platform/dwc/dw-hdmi-phy-e405.h | 63 +
drivers/media/platform/dwc/dw-hdmi-rx.c | 1823 ++++++++++++++++++++
drivers/media/platform/dwc/dw-hdmi-rx.h | 441 +++++
include/media/cec-notifier.h | 6 +-
include/media/cec.h | 7 +
include/media/dwc/dw-hdmi-phy-pdata.h | 128 ++
include/media/dwc/dw-hdmi-rx-pdata.h | 70 +
14 files changed, 3489 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.txt
create mode 100644 drivers/media/platform/dwc/Kconfig
create mode 100644 drivers/media/platform/dwc/Makefile
create mode 100644 drivers/media/platform/dwc/dw-hdmi-phy-e405.c
create mode 100644 drivers/media/platform/dwc/dw-hdmi-phy-e405.h
create mode 100644 drivers/media/platform/dwc/dw-hdmi-rx.c
create mode 100644 drivers/media/platform/dwc/dw-hdmi-rx.h
create mode 100644 include/media/dwc/dw-hdmi-phy-pdata.h
create mode 100644 include/media/dwc/dw-hdmi-rx-pdata.h
--
1.9.1
next reply other threads:[~2017-07-07 11:08 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-07 11:08 Jose Abreu [this message]
2017-07-07 11:08 ` [PATCH v7 1/6] [media] cec.h: Add stub function for cec_register_cec_notifier() Jose Abreu
2017-07-07 11:08 ` [PATCH v7 2/6] [media] cec-notifier.h: Prevent build warnings using forward declaration Jose Abreu
2017-07-07 11:16 ` Hans Verkuil
2017-07-07 11:25 ` Jose Abreu
2017-07-07 11:08 ` [PATCH v7 3/6] dt-bindings: media: Document Synopsys Designware HDMI RX Jose Abreu
2017-07-07 11:08 ` [PATCH v7 4/6] MAINTAINERS: Add entry for Synopsys Designware HDMI drivers Jose Abreu
2017-07-07 11:08 ` [PATCH v7 5/6] [media] platform: Add Synopsys Designware HDMI RX PHY e405 Driver Jose Abreu
2017-07-07 11:08 ` [PATCH v7 6/6] [media] platform: Add Synopsys Designware HDMI RX Controller Driver Jose Abreu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1499425271.git.joabreu@synopsys.com \
--to=jose.abreu@synopsys.com \
--cc=CARLOS.PALMINHA@synopsys.com \
--cc=hans.verkuil@cisco.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mchehab@kernel.org \
--cc=robh+dt@kernel.org \
--cc=snawrocki@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).