From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from 88-149-150-131.v4.ngi.it ([88.149.150.131]:39487 "EHLO vajra.unixproducts.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751365Ab2LPV1A (ORCPT ); Sun, 16 Dec 2012 16:27:00 -0500 To: Subject: Re: cannot make this Asus my cinema-u3100miniplusv2 work under linux MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Date: Sun, 16 Dec 2012 22:26:58 +0100 From: Renato Gallo In-Reply-To: <50CE3BA0.5030503@iki.fi> References: <8e9f16405c8583e35cb97bb7d7daef4b@unixproducts.com> <50CDDF9A.1080509@iki.fi> <50CE0AFA.9030308@iki.fi> <1af6a5408ee3ebccebc3885bba06fc69@unixproducts.com> <50CE3070.10309@iki.fi> <810ffd737b21a0f46e383a76dd4313a2@unixproducts.com> <50CE3BA0.5030503@iki.fi> Message-ID: Sender: linux-media-owner@vger.kernel.org List-ID: I will be honored if my name will be added as reporter, thanks for your kind and fast advice. I have ordered another portable (30 db) antenna and will talk about that in a future reply to this thread :) Il 16/12/2012 22:22 Antti Palosaari ha scritto: > That antenna is your problem. > > I will send that patch to the Kernel 3.8, but as I think it is maybe > too late for 3.8 it will eventually go to the 3.9 which is out > sometime near beginning of next summer. > > If you wish I add your name as reporter then reply. Otherwise case > closed. Feedback from the better antenna could be nice too. > > > Antti > > > On 12/16/2012 11:16 PM, Renato Gallo wrote: >> stock one that came with the device >> >> http://unixproducts.com/antenna.jpg >> >> >> Il 16/12/2012 21:34 Antti Palosaari ha scritto: >>> It is very likely weak signal issue as I said. What kind of antenna >>> you are using? >>> >>> Antti >>> >>> >>> On 12/16/2012 10:13 PM, Renato Gallo wrote: >>>> i found it is a problem with kaffeine, with other programs i can >>>> lock a >>>> signal but reception is very very sketchy (like in unviewable). >>>> >>>> GlovX xine-lib # dmesg |grep e4000 >>>> GlovX xine-lib # dmesg |grep FC0012 >>>> GlovX xine-lib # dmesg |grep FC0013 >>>> [ 28.281685] fc0013: Fitipower FC0013 successfully attached. >>>> GlovX xine-lib # dmesg |grep FC2580 >>>> GlovX xine-lib # dmesg |grep TUA >>>> GlovX xine-lib # >>>> >>>> >>>> Il 16/12/2012 18:55 Antti Palosaari ha scritto: >>>>> On 12/16/2012 07:15 PM, Renato Gallo wrote: >>>>>> now the modules loads and kaffeine recognizes the device but i >>>>>> cannot >>>>>> find any channels. >>>>>> can it be a tuner bug ? >>>>> >>>>> I think it is bad antenna / weak signal. Try w_scan, scan, tzap. >>>>> >>>>> Could you say which RF-tuner it finds from your device? use dmesg >>>>> to >>>>> dump output. It could be for example e4000, FC0012, FC0013, >>>>> FC2580, >>>>> TUA9001 etc. >>>>> >>>>> Antti >>>>> >>>>>> >>>>>> >>>>>> kaffeine(5978) DvbDevice::frontendEvent: tuning failed >>>>>> kaffeine(5978) DvbScanFilter::timerEvent: timeout while reading >>>>>> section; >>>>>> type = 0 pid = 0 >>>>>> kaffeine(5978) DvbScanFilter::timerEvent: timeout while reading >>>>>> section; >>>>>> type = 2 pid = 17 >>>>>> kaffeine(5978) DvbScanFilter::timerEvent: timeout while reading >>>>>> section; >>>>>> type = 4 pid = 16 >>>>>> kaffeine(5978) DvbDevice::frontendEvent: tuning failed >>>>>> kaffeine(5978) DvbScanFilter::timerEvent: timeout while reading >>>>>> section; >>>>>> type = 0 pid = 0 >>>>>> kaffeine(5978) DvbScanFilter::timerEvent: timeout while reading >>>>>> section; >>>>>> type = 2 pid = 17 >>>>>> kaffeine(5978) DvbScanFilter::timerEvent: timeout while reading >>>>>> section; >>>>>> type = 4 pid = 16 >>>>>> kaffeine(5978) DvbDevice::frontendEvent: tuning failed >>>>>> >>>>>> >>>>>> Il 16/12/2012 15:50 Antti Palosaari ha scritto: >>>>>>> On 12/16/2012 04:23 PM, Renato Gallo wrote: >>>>>>>> any news on this ? >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> Asus my cinema-u3100miniplusv2 >>>>>>>> >>>>>>>> Bus 001 Device 015: ID 1b80:d3a8 Afatech >>>>>>>> >>>>>>>> [ 6956.333440] usb 1-6.3.6: new high-speed USB device number >>>>>>>> 16 >>>>>>>> using >>>>>>>> ehci_hcd >>>>>>>> [ 6956.453943] usb 1-6.3.6: New USB device found, >>>>>>>> idVendor=1b80, >>>>>>>> idProduct=d3a8 >>>>>>>> [ 6956.453950] usb 1-6.3.6: New USB device strings: Mfr=1, >>>>>>>> Product=2, >>>>>>>> SerialNumber=0 >>>>>>>> [ 6956.453955] usb 1-6.3.6: Product: Rtl2832UDVB >>>>>>>> [ 6956.453959] usb 1-6.3.6: Manufacturer: Realtek >>>>>>>> >>>>>>> >>>>>>> Seems to be Realtek RTL2832U. Add that USB ID to the driver and >>>>>>> test. >>>>>>> It is very high probability it starts working. >>>>>>> >>>>>>> Here is the patch: >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> http://git.linuxtv.org/anttip/media_tree.git/shortlog/refs/heads/rtl28xxu-usb-ids >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> Please test and report. >>>>>>> >>>>>>> regards >>>>>>> Antti >>>>>> >>>>>> -- >>>>>> To unsubscribe from this list: send the line "unsubscribe >>>>>> linux-media" in >>>>>> the body of a message to majordomo@vger.kernel.org >>>>>> More majordomo info at >>>>>> http://vger.kernel.org/majordomo-info.html >>>> >>>> -- >>>> To unsubscribe from this list: send the line "unsubscribe >>>> linux-media" in >>>> the body of a message to majordomo@vger.kernel.org >>>> More majordomo info at http://vger.kernel.org/majordomo-info.html >> -- >> To unsubscribe from this list: send the line "unsubscribe >> linux-media" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html