[PATCH v4 0/2] Add TPS68470 power supply support for ov13b10 sensor

[PATCH v4 0/2] Add TPS68470 power supply support for ov13b10 sensor

[Arun T]

This patch series adds power supply management support for the OV13B10 camera sensor when used with TPS68470 PMIC, commonly used on Intel-based camera platforms.

The OV13B10 sensor requires three power supplies (DOVDD, AVDD, DVDD) which are provided by the TPS68470 PMIC.
This series implements proper regulator framework integration to manage these power supplies during sensor power on/off sequences.

Changes in v4:
        - Discrete INT3472 supplying regulator to i2c-OVTI13B1:00 and tps68470 supplying regulator to i2c-OVTI13B1:01.
	- Change Analog regulator name as avdd for tps68470 pmic
	- Fixed regulator_consumer_supply maps to i2c-OVTI13B1:01 device.
        - Removed vdd regulator from Power supply names list

Suggested by Hans:
        - No "avdd" found, only "vdda" and "ana" - check if "ana" should be changed to "avdd".
        - Drop unused regulator maps. Only keep the 3 maps used by sensor-driver.
        - For "i2c-OVTI13B1:01" consumer, only map "dovdd", "avdd", and "dvdd" supplies.

Changes in v3:
        - Fixed check patch errors as updated by sakari
        - Enabled VCM regulator for ov13b10 sensor to enable autofocus to work

Suggested by Sakari:
        - Add include header file in alphabetical order
        - Remove extra space
        - Asked to check vcm instance

Changes in v2:
        - Added power supply names array for the three required regulators
        - Implement regulator handling with devm_regulator_bulk_get()
        - Add regulator_bulk_enable() and regulator_bulk_disable() for sensor power on/off sequence

Suggested by Hans:
        - Add multiple regulators you should use the bulk regulator API
        - Use use "reset" instead of "s_resetn" for parse gpio name.
        - Add diffent regulator power supplies  in single array

Arun T (2):
  platform/x86: int3472: Add TPS68470 board data for Intel nvl
  media: i2c: ov13b10: support tps68470 regulator and gpio

 drivers/media/i2c/ov13b10.c                   |  47 +++---
 .../x86/intel/int3472/tps68470_board_data.c   | 150 ++++++++++++++++++
 2 files changed, 176 insertions(+), 21 deletions(-)

-- 
2.43.0

[PATCH v4 1/2] platform/x86: int3472: Add TPS68470 board data for Intel nvl

[Arun T]

The Intel NVL platform uses IPU8 is powered by a TPS68470 PMIC,requiring board
data to configure the GPIOs and regulators for proper camera sensor operation.

Signed-off-by: Arun T <arun.t@intel.com>
---
 .../x86/intel/int3472/tps68470_board_data.c   | 150 ++++++++++++++++++
 1 file changed, 150 insertions(+)

diff --git a/drivers/platform/x86/intel/int3472/tps68470_board_data.c b/drivers/platform/x86/intel/int3472/tps68470_board_data.c
index 71357a036292..8ae5e01f6660 100644
--- a/drivers/platform/x86/intel/int3472/tps68470_board_data.c
+++ b/drivers/platform/x86/intel/int3472/tps68470_board_data.c
@@ -143,6 +143,34 @@ static struct regulator_consumer_supply int3479_aux2_consumer_supplies[] = {
 	REGULATOR_SUPPLY("dovdd", "i2c-INT3479:00"),
 };
 
+/* Settings for Intel NVL platform */
+
+static struct regulator_consumer_supply int3472_core_consumer_supplies[] = {
+	REGULATOR_SUPPLY("dvdd", "i2c-OVTI13B1:01"),
+};
+
+static struct regulator_consumer_supply int3472_ana_consumer_supplies[] = {
+	REGULATOR_SUPPLY("avdd", "i2c-OVTI13B1:01"),
+};
+
+static struct regulator_consumer_supply int3472_vcm_consumer_supplies[] = {
+	REGULATOR_SUPPLY("vdd", "i2c-OVTI13B1:01"),
+};
+
+static struct regulator_consumer_supply int3472_vsio_consumer_supplies[] = {
+	REGULATOR_SUPPLY("dovdd", "i2c-OVTI13B1:01"),
+	REGULATOR_SUPPLY("vsio", "i2c-OVTI13B1:01"),
+	REGULATOR_SUPPLY("vddd", "i2c-OVTI13B1:01"),
+};
+
+static struct regulator_consumer_supply int3472_aux1_consumer_supplies[] = {
+	REGULATOR_SUPPLY("vdda", "i2c-OVTI13B1:01"),
+};
+
+static struct regulator_consumer_supply int3472_aux2_consumer_supplies[] = {
+	REGULATOR_SUPPLY("vdddo", "i2c-OVTI13B1:01"),
+};
+
 static const struct regulator_init_data dell_7212_tps68470_core_reg_init_data = {
 	.constraints = {
 		.min_uV = 1200000,
@@ -220,6 +248,82 @@ static const struct regulator_init_data dell_7212_tps68470_aux2_reg_init_data =
 	.consumer_supplies = int3479_aux2_consumer_supplies,
 };
 
+static const struct regulator_init_data intel_nvl_tps68470_core_reg_init_data = {
+	.constraints = {
+		.min_uV = 1200000,
+		.max_uV = 1200000,
+		.apply_uV = true,
+		.always_on = true,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(int3472_core_consumer_supplies),
+	.consumer_supplies = int3472_core_consumer_supplies,
+};
+
+static const struct regulator_init_data intel_nvl_tps68470_ana_reg_init_data = {
+	.constraints = {
+		.min_uV = 2815200,
+		.max_uV = 2815200,
+		.apply_uV = true,
+		.always_on = true,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(int3472_ana_consumer_supplies),
+	.consumer_supplies = int3472_ana_consumer_supplies,
+};
+
+static const struct regulator_init_data intel_nvl_tps68470_vcm_reg_init_data = {
+	.constraints = {
+		.min_uV = 2815200,
+		.max_uV = 2815200,
+		.apply_uV = true,
+		.always_on = true,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(int3472_vcm_consumer_supplies),
+	.consumer_supplies = int3472_vcm_consumer_supplies,
+};
+
+/* Ensure the always-on VIO regulator has the same voltage as VSIO */
+static const struct regulator_init_data intel_nvl_tps68470_vio_reg_init_data = {
+	.constraints = {
+		.min_uV = 1800600,
+		.max_uV = 1800600,
+		.apply_uV = true,
+		.always_on = true,
+	},
+};
+
+static const struct regulator_init_data intel_nvl_tps68470_vsio_reg_init_data = {
+	.constraints = {
+		.min_uV = 1800600,
+		.max_uV = 1800600,
+		.apply_uV = true,
+		.always_on = true,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(int3472_vsio_consumer_supplies),
+	.consumer_supplies = int3472_vsio_consumer_supplies,
+};
+
+static const struct regulator_init_data intel_nvl_tps68470_aux1_reg_init_data = {
+	.constraints = {
+		.min_uV = 2815200,
+		.max_uV = 2815200,
+		.apply_uV = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(int3472_aux1_consumer_supplies),
+	.consumer_supplies = int3472_aux1_consumer_supplies,
+};
+
+static const struct regulator_init_data intel_nvl_tps68470_aux2_reg_init_data = {
+	.constraints = {
+		.min_uV = 1800600,
+		.max_uV = 1800600,
+		.apply_uV = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(int3472_aux2_consumer_supplies),
+	.consumer_supplies = int3472_aux2_consumer_supplies,
+};
+
 static const struct tps68470_regulator_platform_data dell_7212_tps68470_pdata = {
 	.reg_init_data = {
 		[TPS68470_CORE] = &dell_7212_tps68470_core_reg_init_data,
@@ -232,6 +336,18 @@ static const struct tps68470_regulator_platform_data dell_7212_tps68470_pdata =
 	},
 };
 
+static const struct tps68470_regulator_platform_data intel_nvl_tps68470_pdata = {
+	.reg_init_data = {
+		[TPS68470_CORE] = &intel_nvl_tps68470_core_reg_init_data,
+		[TPS68470_ANA]  = &intel_nvl_tps68470_ana_reg_init_data,
+		[TPS68470_VCM]  = &intel_nvl_tps68470_vcm_reg_init_data,
+		[TPS68470_VIO] = &intel_nvl_tps68470_vio_reg_init_data,
+		[TPS68470_VSIO] = &intel_nvl_tps68470_vsio_reg_init_data,
+		[TPS68470_AUX1] = &intel_nvl_tps68470_aux1_reg_init_data,
+		[TPS68470_AUX2] = &intel_nvl_tps68470_aux2_reg_init_data,
+	},
+};
+
 static struct gpiod_lookup_table surface_go_int347a_gpios = {
 	.dev_id = "i2c-INT347A:00",
 	.table = {
@@ -258,6 +374,23 @@ static struct gpiod_lookup_table dell_7212_int3479_gpios = {
 	}
 };
 
+static struct gpiod_lookup_table intel_nvl_int347a_gpios = {
+	.dev_id = "i2c-OVTI13B1:01",
+	.table = {
+		GPIO_LOOKUP("tps68470-gpio", 9, "reset", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("tps68470-gpio", 8, "s_idle", GPIO_ACTIVE_LOW),
+		{ }
+	}
+};
+
+static struct gpiod_lookup_table intel_nvl_int347e_gpios = {
+	.dev_id = "i2c-OVTI13B1:01",
+	.table = {
+	GPIO_LOOKUP("tps68470-gpio", 7, "s_enable", GPIO_ACTIVE_LOW),
+		{ }
+	}
+};
+
 static const struct int3472_tps68470_board_data surface_go_tps68470_board_data = {
 	.dev_name = "i2c-INT3472:05",
 	.tps68470_regulator_pdata = &surface_go_tps68470_pdata,
@@ -287,6 +420,16 @@ static const struct int3472_tps68470_board_data dell_7212_tps68470_board_data =
 	},
 };
 
+static const struct int3472_tps68470_board_data intel_nvl_tps68470_board_data = {
+	.dev_name = "i2c-INT3472:04",
+	.tps68470_regulator_pdata = &intel_nvl_tps68470_pdata,
+	.n_gpiod_lookups = 2,
+	.tps68470_gpio_lookup_tables = {
+		&intel_nvl_int347a_gpios,
+		&intel_nvl_int347e_gpios,
+	},
+};
+
 static const struct dmi_system_id int3472_tps68470_board_data_table[] = {
 	{
 		.matches = {
@@ -316,6 +459,13 @@ static const struct dmi_system_id int3472_tps68470_board_data_table[] = {
 		},
 		.driver_data = (void *)&dell_7212_tps68470_board_data,
 	},
+	{
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Intel Corporation"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Nova Lake Client Platform"),
+		},
+	       .driver_data = (void *)&intel_nvl_tps68470_board_data,
+	},
 	{ }
 };
 
-- 
2.43.0

[PATCH v4 2/2] media: i2c: ov13b10: support tps68470 regulator and gpio

[Arun T]

The OV13B10 sensor obtains clock and regulators from the TPS68470 PMIC.
Add TPS68470 regulator and GPIO names to the sensor power on

Signed-off-by: Arun T <arun.t@intel.com>
---
 drivers/media/i2c/ov13b10.c | 47 ++++++++++++++++++++-----------------
 1 file changed, 26 insertions(+), 21 deletions(-)

diff --git a/drivers/media/i2c/ov13b10.c b/drivers/media/i2c/ov13b10.c
index 5421874732bc..4b7b17afb64c 100644
--- a/drivers/media/i2c/ov13b10.c
+++ b/drivers/media/i2c/ov13b10.c
@@ -3,6 +3,7 @@
 
 #include <linux/acpi.h>
 #include <linux/clk.h>
+#include <linux/regulator/consumer.h>
 #include <linux/delay.h>
 #include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
@@ -699,6 +700,12 @@ static const struct ov13b10_mode supported_2_lanes_modes[] = {
 	},
 };
 
+static const char * const ov13b10_supply_names[] = {
+	"dovdd",        /* Digital I/O power */
+	"avdd",         /* Analog power */
+	"dvdd",         /* Digital core power */
+};
+
 struct ov13b10 {
 	struct device *dev;
 
@@ -708,7 +715,7 @@ struct ov13b10 {
 	struct v4l2_ctrl_handler ctrl_handler;
 
 	struct clk *img_clk;
-	struct regulator *avdd;
+	struct regulator_bulk_data supplies[ARRAY_SIZE(ov13b10_supply_names)];
 	struct gpio_desc *reset;
 
 	/* V4L2 Controls */
@@ -1194,9 +1201,8 @@ static int ov13b10_power_off(struct device *dev)
 	struct ov13b10 *ov13b10 = to_ov13b10(sd);
 
 	gpiod_set_value_cansleep(ov13b10->reset, 1);
-
-	if (ov13b10->avdd)
-		regulator_disable(ov13b10->avdd);
+	regulator_bulk_disable(ARRAY_SIZE(ov13b10_supply_names),
+			       ov13b10->supplies);
 
 	clk_disable_unprepare(ov13b10->img_clk);
 
@@ -1214,14 +1220,12 @@ static int ov13b10_power_on(struct device *dev)
 		dev_err(dev, "failed to enable imaging clock: %d", ret);
 		return ret;
 	}
-
-	if (ov13b10->avdd) {
-		ret = regulator_enable(ov13b10->avdd);
-		if (ret < 0) {
-			dev_err(dev, "failed to enable avdd: %d", ret);
-			clk_disable_unprepare(ov13b10->img_clk);
-			return ret;
-		}
+	ret = regulator_bulk_enable(ARRAY_SIZE(ov13b10_supply_names),
+				    ov13b10->supplies);
+	if (ret < 0) {
+		dev_err(dev, "failed to enable regulators\n");
+		clk_disable_unprepare(ov13b10->img_clk);
+		return ret;
 	}
 
 	gpiod_set_value_cansleep(ov13b10->reset, 0);
@@ -1475,7 +1479,8 @@ static int ov13b10_get_pm_resources(struct ov13b10 *ov13b)
 	unsigned long freq;
 	int ret;
 
-	ov13b->reset = devm_gpiod_get_optional(ov13b->dev, "reset", GPIOD_OUT_LOW);
+	ov13b->reset = devm_gpiod_get_optional(ov13b->dev, "reset",
+					       GPIOD_OUT_LOW);
 	if (IS_ERR(ov13b->reset))
 		return dev_err_probe(ov13b->dev, PTR_ERR(ov13b->reset),
 				     "failed to get reset gpio\n");
@@ -1491,15 +1496,15 @@ static int ov13b10_get_pm_resources(struct ov13b10 *ov13b)
 				     "external clock %lu is not supported\n",
 				     freq);
 
-	ov13b->avdd = devm_regulator_get_optional(ov13b->dev, "avdd");
-	if (IS_ERR(ov13b->avdd)) {
-		ret = PTR_ERR(ov13b->avdd);
-		ov13b->avdd = NULL;
-		if (ret != -ENODEV)
-			return dev_err_probe(ov13b->dev, ret,
-					     "failed to get avdd regulator\n");
-	}
+	for (unsigned int i = 0; i < ARRAY_SIZE(ov13b10_supply_names); i++)
+		ov13b->supplies[i].supply = ov13b10_supply_names[i];
 
+	ret = devm_regulator_bulk_get(ov13b->dev,
+				      ARRAY_SIZE(ov13b10_supply_names),
+				      ov13b->supplies);
+	if (ret)
+		return dev_err_probe(ov13b->dev, ret,
+				     "failed to get regulators\n");
 	return 0;
 }
 
-- 
2.43.0

RE: [PATCH v4 1/2] platform/x86: int3472: Add TPS68470 board data for Intel nvl

[T, Arun]

Hi All, 

There has been no reply to these below patches for quite some time. Could you please provide any feedback, comments, or suggestions on these below patches

https://lore.kernel.org/linux-media/20260306163019.1619490-2-arun.t@intel.com/
https://lore.kernel.org/all/20260306163019.1619490-3-arun.t@intel.com/

-
Regards,
Arun T

-----Original Message-----
From: T, Arun <arun.t@intel.com> 
Sent: 06 March 2026 10:00 PM
To: T, Arun <arun.t@intel.com>; johannes.goede@oss.qualcomm.com
Cc: sakari.ailus@linux.intel.com; Kao, Arec <arec.kao@intel.com>; ilpo.jarvinen@linux.intel.com; dan.scally@ideasonboard.com; platform-driver-x86@vger.kernel.org; linux-media@vger.kernel.org; linux-kernel@vger.kernel.org; Djait, Mehdi <mehdi.djait@intel.com>
Subject: [PATCH v4 1/2] platform/x86: int3472: Add TPS68470 board data for Intel nvl

The Intel NVL platform uses IPU8 is powered by a TPS68470 PMIC,requiring board data to configure the GPIOs and regulators for proper camera sensor operation.

Signed-off-by: Arun T <arun.t@intel.com>
---
 .../x86/intel/int3472/tps68470_board_data.c   | 150 ++++++++++++++++++
 1 file changed, 150 insertions(+)

diff --git a/drivers/platform/x86/intel/int3472/tps68470_board_data.c b/drivers/platform/x86/intel/int3472/tps68470_board_data.c
index 71357a036292..8ae5e01f6660 100644
--- a/drivers/platform/x86/intel/int3472/tps68470_board_data.c
+++ b/drivers/platform/x86/intel/int3472/tps68470_board_data.c
@@ -143,6 +143,34 @@ static struct regulator_consumer_supply int3479_aux2_consumer_supplies[] = {
 	REGULATOR_SUPPLY("dovdd", "i2c-INT3479:00"),  };
 
+/* Settings for Intel NVL platform */
+
+static struct regulator_consumer_supply int3472_core_consumer_supplies[] = {
+	REGULATOR_SUPPLY("dvdd", "i2c-OVTI13B1:01"), };
+
+static struct regulator_consumer_supply int3472_ana_consumer_supplies[] = {
+	REGULATOR_SUPPLY("avdd", "i2c-OVTI13B1:01"), };
+
+static struct regulator_consumer_supply int3472_vcm_consumer_supplies[] = {
+	REGULATOR_SUPPLY("vdd", "i2c-OVTI13B1:01"), };
+
+static struct regulator_consumer_supply int3472_vsio_consumer_supplies[] = {
+	REGULATOR_SUPPLY("dovdd", "i2c-OVTI13B1:01"),
+	REGULATOR_SUPPLY("vsio", "i2c-OVTI13B1:01"),
+	REGULATOR_SUPPLY("vddd", "i2c-OVTI13B1:01"), };
+
+static struct regulator_consumer_supply int3472_aux1_consumer_supplies[] = {
+	REGULATOR_SUPPLY("vdda", "i2c-OVTI13B1:01"), };
+
+static struct regulator_consumer_supply int3472_aux2_consumer_supplies[] = {
+	REGULATOR_SUPPLY("vdddo", "i2c-OVTI13B1:01"), };
+
 static const struct regulator_init_data dell_7212_tps68470_core_reg_init_data = {
 	.constraints = {
 		.min_uV = 1200000,
@@ -220,6 +248,82 @@ static const struct regulator_init_data dell_7212_tps68470_aux2_reg_init_data =
 	.consumer_supplies = int3479_aux2_consumer_supplies,  };
 
+static const struct regulator_init_data intel_nvl_tps68470_core_reg_init_data = {
+	.constraints = {
+		.min_uV = 1200000,
+		.max_uV = 1200000,
+		.apply_uV = true,
+		.always_on = true,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(int3472_core_consumer_supplies),
+	.consumer_supplies = int3472_core_consumer_supplies, };
+
+static const struct regulator_init_data intel_nvl_tps68470_ana_reg_init_data = {
+	.constraints = {
+		.min_uV = 2815200,
+		.max_uV = 2815200,
+		.apply_uV = true,
+		.always_on = true,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(int3472_ana_consumer_supplies),
+	.consumer_supplies = int3472_ana_consumer_supplies, };
+
+static const struct regulator_init_data intel_nvl_tps68470_vcm_reg_init_data = {
+	.constraints = {
+		.min_uV = 2815200,
+		.max_uV = 2815200,
+		.apply_uV = true,
+		.always_on = true,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(int3472_vcm_consumer_supplies),
+	.consumer_supplies = int3472_vcm_consumer_supplies, };
+
+/* Ensure the always-on VIO regulator has the same voltage as VSIO */ 
+static const struct regulator_init_data intel_nvl_tps68470_vio_reg_init_data = {
+	.constraints = {
+		.min_uV = 1800600,
+		.max_uV = 1800600,
+		.apply_uV = true,
+		.always_on = true,
+	},
+};
+
+static const struct regulator_init_data intel_nvl_tps68470_vsio_reg_init_data = {
+	.constraints = {
+		.min_uV = 1800600,
+		.max_uV = 1800600,
+		.apply_uV = true,
+		.always_on = true,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(int3472_vsio_consumer_supplies),
+	.consumer_supplies = int3472_vsio_consumer_supplies, };
+
+static const struct regulator_init_data intel_nvl_tps68470_aux1_reg_init_data = {
+	.constraints = {
+		.min_uV = 2815200,
+		.max_uV = 2815200,
+		.apply_uV = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(int3472_aux1_consumer_supplies),
+	.consumer_supplies = int3472_aux1_consumer_supplies, };
+
+static const struct regulator_init_data intel_nvl_tps68470_aux2_reg_init_data = {
+	.constraints = {
+		.min_uV = 1800600,
+		.max_uV = 1800600,
+		.apply_uV = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(int3472_aux2_consumer_supplies),
+	.consumer_supplies = int3472_aux2_consumer_supplies, };
+
 static const struct tps68470_regulator_platform_data dell_7212_tps68470_pdata = {
 	.reg_init_data = {
 		[TPS68470_CORE] = &dell_7212_tps68470_core_reg_init_data,
@@ -232,6 +336,18 @@ static const struct tps68470_regulator_platform_data dell_7212_tps68470_pdata =
 	},
 };
 
+static const struct tps68470_regulator_platform_data intel_nvl_tps68470_pdata = {
+	.reg_init_data = {
+		[TPS68470_CORE] = &intel_nvl_tps68470_core_reg_init_data,
+		[TPS68470_ANA]  = &intel_nvl_tps68470_ana_reg_init_data,
+		[TPS68470_VCM]  = &intel_nvl_tps68470_vcm_reg_init_data,
+		[TPS68470_VIO] = &intel_nvl_tps68470_vio_reg_init_data,
+		[TPS68470_VSIO] = &intel_nvl_tps68470_vsio_reg_init_data,
+		[TPS68470_AUX1] = &intel_nvl_tps68470_aux1_reg_init_data,
+		[TPS68470_AUX2] = &intel_nvl_tps68470_aux2_reg_init_data,
+	},
+};
+
 static struct gpiod_lookup_table surface_go_int347a_gpios = {
 	.dev_id = "i2c-INT347A:00",
 	.table = {
@@ -258,6 +374,23 @@ static struct gpiod_lookup_table dell_7212_int3479_gpios = {
 	}
 };
 
+static struct gpiod_lookup_table intel_nvl_int347a_gpios = {
+	.dev_id = "i2c-OVTI13B1:01",
+	.table = {
+		GPIO_LOOKUP("tps68470-gpio", 9, "reset", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("tps68470-gpio", 8, "s_idle", GPIO_ACTIVE_LOW),
+		{ }
+	}
+};
+
+static struct gpiod_lookup_table intel_nvl_int347e_gpios = {
+	.dev_id = "i2c-OVTI13B1:01",
+	.table = {
+	GPIO_LOOKUP("tps68470-gpio", 7, "s_enable", GPIO_ACTIVE_LOW),
+		{ }
+	}
+};
+
 static const struct int3472_tps68470_board_data surface_go_tps68470_board_data = {
 	.dev_name = "i2c-INT3472:05",
 	.tps68470_regulator_pdata = &surface_go_tps68470_pdata, @@ -287,6 +420,16 @@ static const struct int3472_tps68470_board_data dell_7212_tps68470_board_data =
 	},
 };
 
+static const struct int3472_tps68470_board_data intel_nvl_tps68470_board_data = {
+	.dev_name = "i2c-INT3472:04",
+	.tps68470_regulator_pdata = &intel_nvl_tps68470_pdata,
+	.n_gpiod_lookups = 2,
+	.tps68470_gpio_lookup_tables = {
+		&intel_nvl_int347a_gpios,
+		&intel_nvl_int347e_gpios,
+	},
+};
+
 static const struct dmi_system_id int3472_tps68470_board_data_table[] = {
 	{
 		.matches = {
@@ -316,6 +459,13 @@ static const struct dmi_system_id int3472_tps68470_board_data_table[] = {
 		},
 		.driver_data = (void *)&dell_7212_tps68470_board_data,
 	},
+	{
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Intel Corporation"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Nova Lake Client Platform"),
+		},
+	       .driver_data = (void *)&intel_nvl_tps68470_board_data,
+	},
 	{ }
 };
 
--
2.43.0

Re: [PATCH v4 1/2] platform/x86: int3472: Add TPS68470 board data for Intel nvl

[sakari.ailus]

Hi Arun,

On Mon, Mar 23, 2026 at 06:12:29AM +0000, T, Arun wrote:
> Hi All, 
> 
> There has been no reply to these below patches for quite some time. Could you please provide any feedback, comments, or suggestions on these below patches
> 
> https://lore.kernel.org/linux-media/20260306163019.1619490-2-arun.t@intel.com/
> https://lore.kernel.org/all/20260306163019.1619490-3-arun.t@intel.com/

Could you reply to my earlier reviews?

First and foremost, we still have eight regulators configured for a device
that uses three. Some of them have been declared as always_on, too, for no
apparent reason.

> 
> -
> Regards,
> Arun T
> 
> -----Original Message-----
> From: T, Arun <arun.t@intel.com> 
> Sent: 06 March 2026 10:00 PM
> To: T, Arun <arun.t@intel.com>; johannes.goede@oss.qualcomm.com
> Cc: sakari.ailus@linux.intel.com; Kao, Arec <arec.kao@intel.com>; ilpo.jarvinen@linux.intel.com; dan.scally@ideasonboard.com; platform-driver-x86@vger.kernel.org; linux-media@vger.kernel.org; linux-kernel@vger.kernel.org; Djait, Mehdi <mehdi.djait@intel.com>
> Subject: [PATCH v4 1/2] platform/x86: int3472: Add TPS68470 board data for Intel nvl
> 
> The Intel NVL platform uses IPU8 is powered by a TPS68470 PMIC,requiring board data to configure the GPIOs and regulators for proper camera sensor operation.
> 
> Signed-off-by: Arun T <arun.t@intel.com>
> ---
>  .../x86/intel/int3472/tps68470_board_data.c   | 150 ++++++++++++++++++
>  1 file changed, 150 insertions(+)
> 
> diff --git a/drivers/platform/x86/intel/int3472/tps68470_board_data.c b/drivers/platform/x86/intel/int3472/tps68470_board_data.c
> index 71357a036292..8ae5e01f6660 100644
> --- a/drivers/platform/x86/intel/int3472/tps68470_board_data.c
> +++ b/drivers/platform/x86/intel/int3472/tps68470_board_data.c
> @@ -143,6 +143,34 @@ static struct regulator_consumer_supply int3479_aux2_consumer_supplies[] = {
>  	REGULATOR_SUPPLY("dovdd", "i2c-INT3479:00"),  };
>  
> +/* Settings for Intel NVL platform */
> +
> +static struct regulator_consumer_supply int3472_core_consumer_supplies[] = {
> +	REGULATOR_SUPPLY("dvdd", "i2c-OVTI13B1:01"), };
> +
> +static struct regulator_consumer_supply int3472_ana_consumer_supplies[] = {
> +	REGULATOR_SUPPLY("avdd", "i2c-OVTI13B1:01"), };
> +
> +static struct regulator_consumer_supply int3472_vcm_consumer_supplies[] = {
> +	REGULATOR_SUPPLY("vdd", "i2c-OVTI13B1:01"), };
> +
> +static struct regulator_consumer_supply int3472_vsio_consumer_supplies[] = {
> +	REGULATOR_SUPPLY("dovdd", "i2c-OVTI13B1:01"),
> +	REGULATOR_SUPPLY("vsio", "i2c-OVTI13B1:01"),
> +	REGULATOR_SUPPLY("vddd", "i2c-OVTI13B1:01"), };
> +
> +static struct regulator_consumer_supply int3472_aux1_consumer_supplies[] = {
> +	REGULATOR_SUPPLY("vdda", "i2c-OVTI13B1:01"), };
> +
> +static struct regulator_consumer_supply int3472_aux2_consumer_supplies[] = {
> +	REGULATOR_SUPPLY("vdddo", "i2c-OVTI13B1:01"), };
> +
>  static const struct regulator_init_data dell_7212_tps68470_core_reg_init_data = {
>  	.constraints = {
>  		.min_uV = 1200000,
> @@ -220,6 +248,82 @@ static const struct regulator_init_data dell_7212_tps68470_aux2_reg_init_data =
>  	.consumer_supplies = int3479_aux2_consumer_supplies,  };
>  
> +static const struct regulator_init_data intel_nvl_tps68470_core_reg_init_data = {
> +	.constraints = {
> +		.min_uV = 1200000,
> +		.max_uV = 1200000,
> +		.apply_uV = true,
> +		.always_on = true,
> +	},
> +	.num_consumer_supplies = ARRAY_SIZE(int3472_core_consumer_supplies),
> +	.consumer_supplies = int3472_core_consumer_supplies, };
> +
> +static const struct regulator_init_data intel_nvl_tps68470_ana_reg_init_data = {
> +	.constraints = {
> +		.min_uV = 2815200,
> +		.max_uV = 2815200,
> +		.apply_uV = true,
> +		.always_on = true,
> +	},
> +	.num_consumer_supplies = ARRAY_SIZE(int3472_ana_consumer_supplies),
> +	.consumer_supplies = int3472_ana_consumer_supplies, };
> +
> +static const struct regulator_init_data intel_nvl_tps68470_vcm_reg_init_data = {
> +	.constraints = {
> +		.min_uV = 2815200,
> +		.max_uV = 2815200,
> +		.apply_uV = true,
> +		.always_on = true,
> +	},
> +	.num_consumer_supplies = ARRAY_SIZE(int3472_vcm_consumer_supplies),
> +	.consumer_supplies = int3472_vcm_consumer_supplies, };
> +
> +/* Ensure the always-on VIO regulator has the same voltage as VSIO */ 
> +static const struct regulator_init_data intel_nvl_tps68470_vio_reg_init_data = {
> +	.constraints = {
> +		.min_uV = 1800600,
> +		.max_uV = 1800600,
> +		.apply_uV = true,
> +		.always_on = true,
> +	},
> +};
> +
> +static const struct regulator_init_data intel_nvl_tps68470_vsio_reg_init_data = {
> +	.constraints = {
> +		.min_uV = 1800600,
> +		.max_uV = 1800600,
> +		.apply_uV = true,
> +		.always_on = true,
> +	},
> +	.num_consumer_supplies = ARRAY_SIZE(int3472_vsio_consumer_supplies),
> +	.consumer_supplies = int3472_vsio_consumer_supplies, };
> +
> +static const struct regulator_init_data intel_nvl_tps68470_aux1_reg_init_data = {
> +	.constraints = {
> +		.min_uV = 2815200,
> +		.max_uV = 2815200,
> +		.apply_uV = 1,
> +		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
> +	},
> +	.num_consumer_supplies = ARRAY_SIZE(int3472_aux1_consumer_supplies),
> +	.consumer_supplies = int3472_aux1_consumer_supplies, };
> +
> +static const struct regulator_init_data intel_nvl_tps68470_aux2_reg_init_data = {
> +	.constraints = {
> +		.min_uV = 1800600,
> +		.max_uV = 1800600,
> +		.apply_uV = 1,
> +		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
> +	},
> +	.num_consumer_supplies = ARRAY_SIZE(int3472_aux2_consumer_supplies),
> +	.consumer_supplies = int3472_aux2_consumer_supplies, };
> +
>  static const struct tps68470_regulator_platform_data dell_7212_tps68470_pdata = {
>  	.reg_init_data = {
>  		[TPS68470_CORE] = &dell_7212_tps68470_core_reg_init_data,
> @@ -232,6 +336,18 @@ static const struct tps68470_regulator_platform_data dell_7212_tps68470_pdata =
>  	},
>  };
>  
> +static const struct tps68470_regulator_platform_data intel_nvl_tps68470_pdata = {
> +	.reg_init_data = {
> +		[TPS68470_CORE] = &intel_nvl_tps68470_core_reg_init_data,
> +		[TPS68470_ANA]  = &intel_nvl_tps68470_ana_reg_init_data,
> +		[TPS68470_VCM]  = &intel_nvl_tps68470_vcm_reg_init_data,
> +		[TPS68470_VIO] = &intel_nvl_tps68470_vio_reg_init_data,
> +		[TPS68470_VSIO] = &intel_nvl_tps68470_vsio_reg_init_data,
> +		[TPS68470_AUX1] = &intel_nvl_tps68470_aux1_reg_init_data,
> +		[TPS68470_AUX2] = &intel_nvl_tps68470_aux2_reg_init_data,
> +	},
> +};
> +
>  static struct gpiod_lookup_table surface_go_int347a_gpios = {
>  	.dev_id = "i2c-INT347A:00",
>  	.table = {
> @@ -258,6 +374,23 @@ static struct gpiod_lookup_table dell_7212_int3479_gpios = {
>  	}
>  };
>  
> +static struct gpiod_lookup_table intel_nvl_int347a_gpios = {
> +	.dev_id = "i2c-OVTI13B1:01",
> +	.table = {
> +		GPIO_LOOKUP("tps68470-gpio", 9, "reset", GPIO_ACTIVE_LOW),
> +		GPIO_LOOKUP("tps68470-gpio", 8, "s_idle", GPIO_ACTIVE_LOW),
> +		{ }
> +	}
> +};
> +
> +static struct gpiod_lookup_table intel_nvl_int347e_gpios = {
> +	.dev_id = "i2c-OVTI13B1:01",
> +	.table = {
> +	GPIO_LOOKUP("tps68470-gpio", 7, "s_enable", GPIO_ACTIVE_LOW),
> +		{ }
> +	}
> +};
> +
>  static const struct int3472_tps68470_board_data surface_go_tps68470_board_data = {
>  	.dev_name = "i2c-INT3472:05",
>  	.tps68470_regulator_pdata = &surface_go_tps68470_pdata, @@ -287,6 +420,16 @@ static const struct int3472_tps68470_board_data dell_7212_tps68470_board_data =
>  	},
>  };
>  
> +static const struct int3472_tps68470_board_data intel_nvl_tps68470_board_data = {
> +	.dev_name = "i2c-INT3472:04",
> +	.tps68470_regulator_pdata = &intel_nvl_tps68470_pdata,
> +	.n_gpiod_lookups = 2,
> +	.tps68470_gpio_lookup_tables = {
> +		&intel_nvl_int347a_gpios,
> +		&intel_nvl_int347e_gpios,
> +	},
> +};
> +
>  static const struct dmi_system_id int3472_tps68470_board_data_table[] = {
>  	{
>  		.matches = {
> @@ -316,6 +459,13 @@ static const struct dmi_system_id int3472_tps68470_board_data_table[] = {
>  		},
>  		.driver_data = (void *)&dell_7212_tps68470_board_data,
>  	},
> +	{
> +		.matches = {
> +			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Intel Corporation"),
> +			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Nova Lake Client Platform"),
> +		},
> +	       .driver_data = (void *)&intel_nvl_tps68470_board_data,
> +	},
>  	{ }
>  };
>  

-- 
Regards,

Sakari Ailus

RE: [PATCH v4 1/2] platform/x86: int3472: Add TPS68470 board data for Intel nvl

[T, Arun]

Hi Sakari, 

The TPS68470 is providing multiple regulators. The VIO regulator is enabled as default ON. The Core, Ana, VCM, and VSIO regulators are enabled to provide power to the ov13b10 sensor. These regulators only get enabled after adding the always_on=true flag.

The sensor does not get powered on without the always_on=true flag. I think there is some issue in driver/regulator/tps68470-regulator.c for configuring the regulator through regulator_enable(). I think always_on=true is good for this case. Please let me know if anything needs to be done on this.
-
Regards,
Arun T

-----Original Message-----
From: sakari.ailus@linux.intel.com <sakari.ailus@linux.intel.com> 
Sent: 23 March 2026 04:12 PM
To: T, Arun <arun.t@intel.com>
Cc: johannes.goede@oss.qualcomm.com; Kao, Arec <arec.kao@intel.com>; ilpo.jarvinen@linux.intel.com; dan.scally@ideasonboard.com; platform-driver-x86@vger.kernel.org; linux-media@vger.kernel.org; linux-kernel@vger.kernel.org; Djait, Mehdi <mehdi.djait@intel.com>
Subject: Re: [PATCH v4 1/2] platform/x86: int3472: Add TPS68470 board data for Intel nvl

Hi Arun,

On Mon, Mar 23, 2026 at 06:12:29AM +0000, T, Arun wrote:
> Hi All,
> 
> There has been no reply to these below patches for quite some time. 
> Could you please provide any feedback, comments, or suggestions on 
> these below patches
> 
> https://lore.kernel.org/linux-media/20260306163019.1619490-2-arun.t@in
> tel.com/ 
> https://lore.kernel.org/all/20260306163019.1619490-3-arun.t@intel.com/

Could you reply to my earlier reviews?

First and foremost, we still have eight regulators configured for a device that uses three. Some of them have been declared as always_on, too, for no apparent reason.

> 
> -
> Regards,
> Arun T
> 
> -----Original Message-----
> From: T, Arun <arun.t@intel.com>
> Sent: 06 March 2026 10:00 PM
> To: T, Arun <arun.t@intel.com>; johannes.goede@oss.qualcomm.com
> Cc: sakari.ailus@linux.intel.com; Kao, Arec <arec.kao@intel.com>; 
> ilpo.jarvinen@linux.intel.com; dan.scally@ideasonboard.com; 
> platform-driver-x86@vger.kernel.org; linux-media@vger.kernel.org; 
> linux-kernel@vger.kernel.org; Djait, Mehdi <mehdi.djait@intel.com>
> Subject: [PATCH v4 1/2] platform/x86: int3472: Add TPS68470 board data 
> for Intel nvl
> 
> The Intel NVL platform uses IPU8 is powered by a TPS68470 PMIC,requiring board data to configure the GPIOs and regulators for proper camera sensor operation.
> 
> Signed-off-by: Arun T <arun.t@intel.com>
> ---
>  .../x86/intel/int3472/tps68470_board_data.c   | 150 ++++++++++++++++++
>  1 file changed, 150 insertions(+)
> 
> diff --git a/drivers/platform/x86/intel/int3472/tps68470_board_data.c 
> b/drivers/platform/x86/intel/int3472/tps68470_board_data.c
> index 71357a036292..8ae5e01f6660 100644
> --- a/drivers/platform/x86/intel/int3472/tps68470_board_data.c
> +++ b/drivers/platform/x86/intel/int3472/tps68470_board_data.c
> @@ -143,6 +143,34 @@ static struct regulator_consumer_supply int3479_aux2_consumer_supplies[] = {
>  	REGULATOR_SUPPLY("dovdd", "i2c-INT3479:00"),  };
>  
> +/* Settings for Intel NVL platform */
> +
> +static struct regulator_consumer_supply int3472_core_consumer_supplies[] = {
> +	REGULATOR_SUPPLY("dvdd", "i2c-OVTI13B1:01"), };
> +
> +static struct regulator_consumer_supply int3472_ana_consumer_supplies[] = {
> +	REGULATOR_SUPPLY("avdd", "i2c-OVTI13B1:01"), };
> +
> +static struct regulator_consumer_supply int3472_vcm_consumer_supplies[] = {
> +	REGULATOR_SUPPLY("vdd", "i2c-OVTI13B1:01"), };
> +
> +static struct regulator_consumer_supply int3472_vsio_consumer_supplies[] = {
> +	REGULATOR_SUPPLY("dovdd", "i2c-OVTI13B1:01"),
> +	REGULATOR_SUPPLY("vsio", "i2c-OVTI13B1:01"),
> +	REGULATOR_SUPPLY("vddd", "i2c-OVTI13B1:01"), };
> +
> +static struct regulator_consumer_supply int3472_aux1_consumer_supplies[] = {
> +	REGULATOR_SUPPLY("vdda", "i2c-OVTI13B1:01"), };
> +
> +static struct regulator_consumer_supply int3472_aux2_consumer_supplies[] = {
> +	REGULATOR_SUPPLY("vdddo", "i2c-OVTI13B1:01"), };
> +
>  static const struct regulator_init_data dell_7212_tps68470_core_reg_init_data = {
>  	.constraints = {
>  		.min_uV = 1200000,
> @@ -220,6 +248,82 @@ static const struct regulator_init_data dell_7212_tps68470_aux2_reg_init_data =
>  	.consumer_supplies = int3479_aux2_consumer_supplies,  };
>  
> +static const struct regulator_init_data intel_nvl_tps68470_core_reg_init_data = {
> +	.constraints = {
> +		.min_uV = 1200000,
> +		.max_uV = 1200000,
> +		.apply_uV = true,
> +		.always_on = true,
> +	},
> +	.num_consumer_supplies = ARRAY_SIZE(int3472_core_consumer_supplies),
> +	.consumer_supplies = int3472_core_consumer_supplies, };
> +
> +static const struct regulator_init_data intel_nvl_tps68470_ana_reg_init_data = {
> +	.constraints = {
> +		.min_uV = 2815200,
> +		.max_uV = 2815200,
> +		.apply_uV = true,
> +		.always_on = true,
> +	},
> +	.num_consumer_supplies = ARRAY_SIZE(int3472_ana_consumer_supplies),
> +	.consumer_supplies = int3472_ana_consumer_supplies, };
> +
> +static const struct regulator_init_data intel_nvl_tps68470_vcm_reg_init_data = {
> +	.constraints = {
> +		.min_uV = 2815200,
> +		.max_uV = 2815200,
> +		.apply_uV = true,
> +		.always_on = true,
> +	},
> +	.num_consumer_supplies = ARRAY_SIZE(int3472_vcm_consumer_supplies),
> +	.consumer_supplies = int3472_vcm_consumer_supplies, };
> +
> +/* Ensure the always-on VIO regulator has the same voltage as VSIO */ 
> +static const struct regulator_init_data intel_nvl_tps68470_vio_reg_init_data = {
> +	.constraints = {
> +		.min_uV = 1800600,
> +		.max_uV = 1800600,
> +		.apply_uV = true,
> +		.always_on = true,
> +	},
> +};
> +
> +static const struct regulator_init_data intel_nvl_tps68470_vsio_reg_init_data = {
> +	.constraints = {
> +		.min_uV = 1800600,
> +		.max_uV = 1800600,
> +		.apply_uV = true,
> +		.always_on = true,
> +	},
> +	.num_consumer_supplies = ARRAY_SIZE(int3472_vsio_consumer_supplies),
> +	.consumer_supplies = int3472_vsio_consumer_supplies, };
> +
> +static const struct regulator_init_data intel_nvl_tps68470_aux1_reg_init_data = {
> +	.constraints = {
> +		.min_uV = 2815200,
> +		.max_uV = 2815200,
> +		.apply_uV = 1,
> +		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
> +	},
> +	.num_consumer_supplies = ARRAY_SIZE(int3472_aux1_consumer_supplies),
> +	.consumer_supplies = int3472_aux1_consumer_supplies, };
> +
> +static const struct regulator_init_data intel_nvl_tps68470_aux2_reg_init_data = {
> +	.constraints = {
> +		.min_uV = 1800600,
> +		.max_uV = 1800600,
> +		.apply_uV = 1,
> +		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
> +	},
> +	.num_consumer_supplies = ARRAY_SIZE(int3472_aux2_consumer_supplies),
> +	.consumer_supplies = int3472_aux2_consumer_supplies, };
> +
>  static const struct tps68470_regulator_platform_data dell_7212_tps68470_pdata = {
>  	.reg_init_data = {
>  		[TPS68470_CORE] = &dell_7212_tps68470_core_reg_init_data,
> @@ -232,6 +336,18 @@ static const struct tps68470_regulator_platform_data dell_7212_tps68470_pdata =
>  	},
>  };
>  
> +static const struct tps68470_regulator_platform_data intel_nvl_tps68470_pdata = {
> +	.reg_init_data = {
> +		[TPS68470_CORE] = &intel_nvl_tps68470_core_reg_init_data,
> +		[TPS68470_ANA]  = &intel_nvl_tps68470_ana_reg_init_data,
> +		[TPS68470_VCM]  = &intel_nvl_tps68470_vcm_reg_init_data,
> +		[TPS68470_VIO] = &intel_nvl_tps68470_vio_reg_init_data,
> +		[TPS68470_VSIO] = &intel_nvl_tps68470_vsio_reg_init_data,
> +		[TPS68470_AUX1] = &intel_nvl_tps68470_aux1_reg_init_data,
> +		[TPS68470_AUX2] = &intel_nvl_tps68470_aux2_reg_init_data,
> +	},
> +};
> +
>  static struct gpiod_lookup_table surface_go_int347a_gpios = {
>  	.dev_id = "i2c-INT347A:00",
>  	.table = {
> @@ -258,6 +374,23 @@ static struct gpiod_lookup_table dell_7212_int3479_gpios = {
>  	}
>  };
>  
> +static struct gpiod_lookup_table intel_nvl_int347a_gpios = {
> +	.dev_id = "i2c-OVTI13B1:01",
> +	.table = {
> +		GPIO_LOOKUP("tps68470-gpio", 9, "reset", GPIO_ACTIVE_LOW),
> +		GPIO_LOOKUP("tps68470-gpio", 8, "s_idle", GPIO_ACTIVE_LOW),
> +		{ }
> +	}
> +};
> +
> +static struct gpiod_lookup_table intel_nvl_int347e_gpios = {
> +	.dev_id = "i2c-OVTI13B1:01",
> +	.table = {
> +	GPIO_LOOKUP("tps68470-gpio", 7, "s_enable", GPIO_ACTIVE_LOW),
> +		{ }
> +	}
> +};
> +
>  static const struct int3472_tps68470_board_data surface_go_tps68470_board_data = {
>  	.dev_name = "i2c-INT3472:05",
>  	.tps68470_regulator_pdata = &surface_go_tps68470_pdata, @@ -287,6 +420,16 @@ static const struct int3472_tps68470_board_data dell_7212_tps68470_board_data =
>  	},
>  };
>  
> +static const struct int3472_tps68470_board_data intel_nvl_tps68470_board_data = {
> +	.dev_name = "i2c-INT3472:04",
> +	.tps68470_regulator_pdata = &intel_nvl_tps68470_pdata,
> +	.n_gpiod_lookups = 2,
> +	.tps68470_gpio_lookup_tables = {
> +		&intel_nvl_int347a_gpios,
> +		&intel_nvl_int347e_gpios,
> +	},
> +};
> +
>  static const struct dmi_system_id int3472_tps68470_board_data_table[] = {
>  	{
>  		.matches = {
> @@ -316,6 +459,13 @@ static const struct dmi_system_id int3472_tps68470_board_data_table[] = {
>  		},
>  		.driver_data = (void *)&dell_7212_tps68470_board_data,
>  	},
> +	{
> +		.matches = {
> +			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Intel Corporation"),
> +			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Nova Lake Client Platform"),
> +		},
> +	       .driver_data = (void *)&intel_nvl_tps68470_board_data,
> +	},
>  	{ }
>  };
>  

--
Regards,

Sakari Ailus

Re: [PATCH v4 1/2] platform/x86: int3472: Add TPS68470 board data for Intel nvl

[Dan Scally]

Hi Arun - sorry for the delay looking at these for you

On 06/03/2026 16:30, Arun T wrote:
> The Intel NVL platform uses IPU8 is powered by a TPS68470 PMIC,requiring board
> data to configure the GPIOs and regulators for proper camera sensor operation.
> 
> Signed-off-by: Arun T <arun.t@intel.com>
> ---
>   .../x86/intel/int3472/tps68470_board_data.c   | 150 ++++++++++++++++++
>   1 file changed, 150 insertions(+)
> 
> diff --git a/drivers/platform/x86/intel/int3472/tps68470_board_data.c b/drivers/platform/x86/intel/int3472/tps68470_board_data.c
> index 71357a036292..8ae5e01f6660 100644
> --- a/drivers/platform/x86/intel/int3472/tps68470_board_data.c
> +++ b/drivers/platform/x86/intel/int3472/tps68470_board_data.c
> @@ -143,6 +143,34 @@ static struct regulator_consumer_supply int3479_aux2_consumer_supplies[] = {
>   	REGULATOR_SUPPLY("dovdd", "i2c-INT3479:00"),
>   };
>   
> +/* Settings for Intel NVL platform */
> +
> +static struct regulator_consumer_supply int3472_core_consumer_supplies[] = {
> +	REGULATOR_SUPPLY("dvdd", "i2c-OVTI13B1:01"),
> +};
> +
> +static struct regulator_consumer_supply int3472_ana_consumer_supplies[] = {
> +	REGULATOR_SUPPLY("avdd", "i2c-OVTI13B1:01"),
> +};
> +
> +static struct regulator_consumer_supply int3472_vcm_consumer_supplies[] = {
> +	REGULATOR_SUPPLY("vdd", "i2c-OVTI13B1:01"),
> +};
> +
> +static struct regulator_consumer_supply int3472_vsio_consumer_supplies[] = {
> +	REGULATOR_SUPPLY("dovdd", "i2c-OVTI13B1:01"),
> +	REGULATOR_SUPPLY("vsio", "i2c-OVTI13B1:01"),
> +	REGULATOR_SUPPLY("vddd", "i2c-OVTI13B1:01"),
> +};
> +
> +static struct regulator_consumer_supply int3472_aux1_consumer_supplies[] = {
> +	REGULATOR_SUPPLY("vdda", "i2c-OVTI13B1:01"),
> +};
> +
> +static struct regulator_consumer_supply int3472_aux2_consumer_supplies[] = {
> +	REGULATOR_SUPPLY("vdddo", "i2c-OVTI13B1:01"),
> +};

These settings will assign all 6 regulators to the i2c-OVTI13B1:01 device, in the vsio case with 3 
different names. The patch for the sensor driver itself is only looking for dovdd, avdd and dvdd - 
something is not quite right here.

> +
>   static const struct regulator_init_data dell_7212_tps68470_core_reg_init_data = {
>   	.constraints = {
>   		.min_uV = 1200000,
> @@ -220,6 +248,82 @@ static const struct regulator_init_data dell_7212_tps68470_aux2_reg_init_data =
>   	.consumer_supplies = int3479_aux2_consumer_supplies,
>   };
>   
> +static const struct regulator_init_data intel_nvl_tps68470_core_reg_init_data = {
> +	.constraints = {
> +		.min_uV = 1200000,
> +		.max_uV = 1200000,
> +		.apply_uV = true,
> +		.always_on = true,

I would not expect the regulators to need to be always_on - with the exception of the VSIO one which 
is a bit special.

> +	},
> +	.num_consumer_supplies = ARRAY_SIZE(int3472_core_consumer_supplies),
> +	.consumer_supplies = int3472_core_consumer_supplies,
> +};
> +
> +static const struct regulator_init_data intel_nvl_tps68470_ana_reg_init_data = {
> +	.constraints = {
> +		.min_uV = 2815200,
> +		.max_uV = 2815200,
> +		.apply_uV = true,
> +		.always_on = true,
> +	},
> +	.num_consumer_supplies = ARRAY_SIZE(int3472_ana_consumer_supplies),
> +	.consumer_supplies = int3472_ana_consumer_supplies,
> +};
> +
> +static const struct regulator_init_data intel_nvl_tps68470_vcm_reg_init_data = {
> +	.constraints = {
> +		.min_uV = 2815200,
> +		.max_uV = 2815200,
> +		.apply_uV = true,
> +		.always_on = true,
> +	},
> +	.num_consumer_supplies = ARRAY_SIZE(int3472_vcm_consumer_supplies),
> +	.consumer_supplies = int3472_vcm_consumer_supplies,
> +};
> +
> +/* Ensure the always-on VIO regulator has the same voltage as VSIO */
> +static const struct regulator_init_data intel_nvl_tps68470_vio_reg_init_data = {
> +	.constraints = {
> +		.min_uV = 1800600,
> +		.max_uV = 1800600,
> +		.apply_uV = true,
> +		.always_on = true,
> +	},
> +};
> +
> +static const struct regulator_init_data intel_nvl_tps68470_vsio_reg_init_data = {
> +	.constraints = {
> +		.min_uV = 1800600,
> +		.max_uV = 1800600,
> +		.apply_uV = true,
> +		.always_on = true,
> +	},
> +	.num_consumer_supplies = ARRAY_SIZE(int3472_vsio_consumer_supplies),
> +	.consumer_supplies = int3472_vsio_consumer_supplies,
> +};
> +
> +static const struct regulator_init_data intel_nvl_tps68470_aux1_reg_init_data = {
> +	.constraints = {
> +		.min_uV = 2815200,
> +		.max_uV = 2815200,
> +		.apply_uV = 1,
> +		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
> +	},
> +	.num_consumer_supplies = ARRAY_SIZE(int3472_aux1_consumer_supplies),
> +	.consumer_supplies = int3472_aux1_consumer_supplies,
> +};
> +
> +static const struct regulator_init_data intel_nvl_tps68470_aux2_reg_init_data = {
> +	.constraints = {
> +		.min_uV = 1800600,
> +		.max_uV = 1800600,
> +		.apply_uV = 1,
> +		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
> +	},
> +	.num_consumer_supplies = ARRAY_SIZE(int3472_aux2_consumer_supplies),
> +	.consumer_supplies = int3472_aux2_consumer_supplies,
> +};
> +
>   static const struct tps68470_regulator_platform_data dell_7212_tps68470_pdata = {
>   	.reg_init_data = {
>   		[TPS68470_CORE] = &dell_7212_tps68470_core_reg_init_data,
> @@ -232,6 +336,18 @@ static const struct tps68470_regulator_platform_data dell_7212_tps68470_pdata =
>   	},
>   };
>   
> +static const struct tps68470_regulator_platform_data intel_nvl_tps68470_pdata = {
> +	.reg_init_data = {
> +		[TPS68470_CORE] = &intel_nvl_tps68470_core_reg_init_data,
> +		[TPS68470_ANA]  = &intel_nvl_tps68470_ana_reg_init_data,
> +		[TPS68470_VCM]  = &intel_nvl_tps68470_vcm_reg_init_data,
> +		[TPS68470_VIO] = &intel_nvl_tps68470_vio_reg_init_data,
> +		[TPS68470_VSIO] = &intel_nvl_tps68470_vsio_reg_init_data,
> +		[TPS68470_AUX1] = &intel_nvl_tps68470_aux1_reg_init_data,
> +		[TPS68470_AUX2] = &intel_nvl_tps68470_aux2_reg_init_data,
> +	},
> +};
> +
>   static struct gpiod_lookup_table surface_go_int347a_gpios = {
>   	.dev_id = "i2c-INT347A:00",
>   	.table = {
> @@ -258,6 +374,23 @@ static struct gpiod_lookup_table dell_7212_int3479_gpios = {
>   	}
>   };
>   
> +static struct gpiod_lookup_table intel_nvl_int347a_gpios = {

I would call it "intel_nvl_ovti13b1_gpios" to match the _HID.

> +	.dev_id = "i2c-OVTI13B1:01",
> +	.table = {
> +		GPIO_LOOKUP("tps68470-gpio", 9, "reset", GPIO_ACTIVE_LOW),
> +		GPIO_LOOKUP("tps68470-gpio", 8, "s_idle", GPIO_ACTIVE_LOW),

Although the sensor driver does look for a reset GPIO, it doesn't currently try to handle one called 
s_idle, nor does patch 2 add that...so that entry might be unnecessary too.
> +		{ }
> +	}
> +};
> +
> +static struct gpiod_lookup_table intel_nvl_int347e_gpios = {
> +	.dev_id = "i2c-OVTI13B1:01",
> +	.table = {
> +	GPIO_LOOKUP("tps68470-gpio", 7, "s_enable", GPIO_ACTIVE_LOW),
> +		{ }
> +	}
> +};

The dev_id is the same here; you shouldn't need a second lookup table for the same device, and 
s_enable isn't handled by the sensor driver.

Thanks
Dan

> +
>   static const struct int3472_tps68470_board_data surface_go_tps68470_board_data = {
>   	.dev_name = "i2c-INT3472:05",
>   	.tps68470_regulator_pdata = &surface_go_tps68470_pdata,
> @@ -287,6 +420,16 @@ static const struct int3472_tps68470_board_data dell_7212_tps68470_board_data =
>   	},
>   };
>   
> +static const struct int3472_tps68470_board_data intel_nvl_tps68470_board_data = {
> +	.dev_name = "i2c-INT3472:04",
> +	.tps68470_regulator_pdata = &intel_nvl_tps68470_pdata,
> +	.n_gpiod_lookups = 2,
> +	.tps68470_gpio_lookup_tables = {
> +		&intel_nvl_int347a_gpios,
> +		&intel_nvl_int347e_gpios,
> +	},
> +};
> +
>   static const struct dmi_system_id int3472_tps68470_board_data_table[] = {
>   	{
>   		.matches = {
> @@ -316,6 +459,13 @@ static const struct dmi_system_id int3472_tps68470_board_data_table[] = {
>   		},
>   		.driver_data = (void *)&dell_7212_tps68470_board_data,
>   	},
> +	{
> +		.matches = {
> +			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Intel Corporation"),
> +			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Nova Lake Client Platform"),
> +		},
> +	       .driver_data = (void *)&intel_nvl_tps68470_board_data,
> +	},
>   	{ }
>   };
>