From: Bingbu Cao <bingbu.cao@linux.intel.com>
To: Sakari Ailus <sakari.ailus@linux.intel.com>, linux-media@vger.kernel.org
Cc: Bingbu Cao <bingbu.cao@intel.com>,
Hans de Goede <hansg@kernel.org>,
mehdi.djait@intel.com
Subject: Re: [PATCH v2 02/23] media: i2c: ov01a10: Fix reported pixel-rate value
Date: Tue, 13 Jan 2026 10:43:02 +0800 [thread overview]
Message-ID: <d82ec41e-55c0-2175-6317-c8b2efcef21c@linux.intel.com> (raw)
In-Reply-To: <20260112095949.3851-3-sakari.ailus@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
On 1/12/26 5:59 PM, Sakari Ailus wrote:
> From: Hans de Goede <hansg@kernel.org>
>
> CSI lanes are double-clocked so with a single lane at 400MHZ the resulting
> pixel-rate for 10-bits pixels is 400 MHz * 2 / 10 = 80 MHz, not 40 MHz.
>
> This also matches with the observed frame-rate of 60 fps with the default
> vblank setting: 80000000 / (1488 * 896) = 60.
>
> Fixes: 0827b58dabff ("media: i2c: add ov01a10 image sensor driver")
> Cc: stable@vger.kernel.org
> Signed-off-by: Hans de Goede <hansg@kernel.org>
> Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315
> Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
> ---
> drivers/media/i2c/ov01a10.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/media/i2c/ov01a10.c b/drivers/media/i2c/ov01a10.c
> index e5df01f97978..0b1a1ecfffd0 100644
> --- a/drivers/media/i2c/ov01a10.c
> +++ b/drivers/media/i2c/ov01a10.c
> @@ -16,7 +16,7 @@
> #include <media/v4l2-fwnode.h>
>
> #define OV01A10_LINK_FREQ_400MHZ 400000000ULL
> -#define OV01A10_SCLK 40000000LL
> +#define OV01A10_SCLK 80000000LL
> #define OV01A10_DATA_LANES 1
>
> #define OV01A10_REG_CHIP_ID 0x300a
>
--
Best regards,
Bingbu Cao
next prev parent reply other threads:[~2026-01-13 2:53 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-12 9:59 [PATCH v2 00/23] media: i2c: ov01a10: Add crop, ov01a1b support Sakari Ailus
2026-01-12 9:59 ` [PATCH v2 01/23] media: i2c: ov01a10: Fix the horizontal flip control Sakari Ailus
2026-01-12 9:59 ` [PATCH v2 02/23] media: i2c: ov01a10: Fix reported pixel-rate value Sakari Ailus
2026-01-13 2:43 ` Bingbu Cao [this message]
2026-01-12 9:59 ` [PATCH v2 03/23] media: i2c: ov01a10: Fix analogue gain range Sakari Ailus
2026-01-13 2:42 ` Bingbu Cao
2026-01-12 9:59 ` [PATCH v2 04/23] media: i2c: ov01a10: Add missing v4l2_subdev_cleanup() calls Sakari Ailus
2026-01-12 9:59 ` [PATCH v2 05/23] media: i2c: ov01a10: Fix passing stream instead of pad to v4l2_subdev_state_get_format() Sakari Ailus
2026-01-12 9:59 ` [PATCH v2 06/23] media: i2c: ov01a10: Fix test-pattern disabling Sakari Ailus
2026-01-13 2:59 ` Bingbu Cao
2026-01-13 8:14 ` Sakari Ailus
2026-01-13 10:41 ` Hans de Goede
2026-01-13 10:40 ` Hans de Goede
2026-01-12 9:59 ` [PATCH v2 07/23] media: i2c: ov01a10: Change default vblank value to a vblank resulting in 30 fps Sakari Ailus
2026-01-12 9:59 ` [PATCH v2 08/23] media: i2c: ov01a10: Convert to new CCI register access helpers Sakari Ailus
2026-01-12 9:59 ` [PATCH v2 09/23] media: i2c: ov01a10: Remove overly verbose probe() error reporting Sakari Ailus
2026-01-12 9:59 ` [PATCH v2 10/23] media: i2c: ov01a10: Store dev pointer in struct ov01a10 Sakari Ailus
2026-01-12 9:59 ` [PATCH v2 11/23] media: i2c: ov01a10: Add ov01a10_check_hwcfg() function Sakari Ailus
2026-01-12 9:59 ` [PATCH v2 12/23] media: i2c: ov01a10: Add power on/off sequencing support Sakari Ailus
2026-01-12 9:59 ` [PATCH v2 13/23] media: i2c: ov01a10: Don't update pixel_rate and link_freq from set_fmt Sakari Ailus
2026-01-12 9:59 ` [PATCH v2 14/23] media: i2c: ov01a10: Move setting of ctrl->flags to after checking ctrl_hdlr->error Sakari Ailus
2026-01-12 9:59 ` [PATCH v2 15/23] media: i2c: ov01a10: Use native and default for pixel-array size names Sakari Ailus
2026-01-12 9:59 ` [PATCH v2 16/23] media: i2c: ov01a10: Add cropping support / allow arbitrary sizes Sakari Ailus
2026-01-12 9:59 ` [PATCH v2 17/23] media: i2c: ov01a10: Remove struct ov01a10_reg_list Sakari Ailus
2026-01-12 9:59 ` [PATCH v2 18/23] media: i2c: ov01a10: Replace exposure->min/step with direct define use Sakari Ailus
2026-01-12 9:59 ` [PATCH v2 19/23] media: i2c: ov01a10: Only set register 0x0305 once Sakari Ailus
2026-01-12 9:59 ` [PATCH v2 20/23] media: i2c: ov01a10: Remove values set by controls from global_setting[] Sakari Ailus
2026-01-12 9:59 ` [PATCH v2 21/23] media: i2c: ov01a10: Add ov01a10_sensor_cfg struct Sakari Ailus
2026-01-12 9:59 ` [PATCH v2 22/23] media: i2c: ov01a10: Optimize setting h/vflip values Sakari Ailus
2026-01-12 9:59 ` [PATCH v2 23/23] media: i2c: ov01a10: Add ov01a1b support Sakari Ailus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d82ec41e-55c0-2175-6317-c8b2efcef21c@linux.intel.com \
--to=bingbu.cao@linux.intel.com \
--cc=bingbu.cao@intel.com \
--cc=hansg@kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mehdi.djait@intel.com \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox