Re: [v4.9-rc4] dvb-usb/cinergyT2 NULL pointer dereference

[Malcolm Priestley <tvboxspy@gmail.com>]

On 08/11/16 21:38, Mauro Carvalho Chehab wrote:
> Em Tue, 8 Nov 2016 22:15:24 +0100
> Benjamin Larsson <benjamin@southpole.se> escreveu:
>
>> On 11/08/2016 09:22 PM, Mauro Carvalho Chehab wrote:
>>> Em Tue, 8 Nov 2016 10:42:03 -0800
>>> Linus Torvalds <torvalds@linux-foundation.org> escreveu:
>>>
>>>> On Sun, Nov 6, 2016 at 7:40 AM, Jörg Otte <jrg.otte@gmail.com> wrote:
>>>>> Since v4.9-rc4 I get following crash in dvb-usb-cinergyT2 module.
>>>>
>>>> Looks like it's commit 5ef8ed0e5608f ("[media] cinergyT2-core: don't
>>>> do DMA on stack"), which movced the DMA data array from the stack to
>>>> the "private" pointer. In the process it also added serialization in
>>>> the form of "data_mutex", but and now it oopses on that mutex because
>>>> the private pointer is NULL.
>>>>
>>>> It looks like the "->private" pointer is allocated in dvb_usb_adapter_init()
>>>>
>>>> cinergyt2_usb_probe ->
>>>>   dvb_usb_device_init ->
>>>>     dvb_usb_init() ->
>>>>       dvb_usb_adapter_init()
>>>>
>>>> but the dvb_usb_init() function calls dvb_usb_device_power_ctrl()
>>>> (which calls the "power_ctrl" function, which is
>>>> cinergyt2_power_ctrl() for that drive) *before* it initializes the
>>>> private field.
>>>>
>>>> Mauro, Patrick, could dvb_usb_adapter_init() be called earlier, perhaps?
>>>
>>> Calling it earlier won't work, as we need to load the firmware before
>>> sending the power control commands on some devices.
>>>
>>> Probably the best here is to pass an extra optional function parameter
>>> that will initialize the mutex before calling any functions.
>>>
>>> Btw, if it broke here, the DMA fixes will likely break on other drivers.
>>> So, after Jörg tests this patch, I'll work on a patch series addressing
>>> this issue on the other drivers I touched.
>>>
>>> Regards,
>>> Mauro
>>
>> Just for reference I got the following call trace a week ago. I looks
>> like this confirms that other drivers are affected also.
>
> Yeah, I avoided serializing the logic that detects if the firmware is
> loaded, but forgot that the power control had the same issue. The
> newer dvb usb drivers use the dvb-usb-v2, so I didn't touch this
> code for a while.

I think the problem is that the usb buffer has been put in struct 
cinergyt2_state private area which has not been initialized for initial 
usb probing.

That was one of the main reasons for porting drivers to dvb-usb-v2.

Regards
Malcolm