From: Wangao Wang <wangao.wang@oss.qualcomm.com>
To: Neil Armstrong <neil.armstrong@linaro.org>,
Vikash Garodia <vikash.garodia@oss.qualcomm.com>,
Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>,
Abhinav Kumar <abhinav.kumar@linux.dev>,
Bryan O'Donoghue <bod@kernel.org>,
Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: wangao.wang@oss.qualcomm.com, linux-media@vger.kernel.org,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 0/6] media: qcom: iris: add support for decoding 10bit formats
Date: Wed, 13 May 2026 16:50:23 +0800 [thread overview]
Message-ID: <fb377b11-c54c-4bd9-bf12-cf19d6484c66@oss.qualcomm.com> (raw)
In-Reply-To: <20260511-topic-sm8x50-iris-10bit-decoding-v3-0-7fc049b93042@linaro.org>
[-- Attachment #1: Type: text/plain, Size: 12263 bytes --]
I did testing on Purwa and found that the decoded raw data only has one
frame, and there is also an alignment issue. Screenshots are in the
attachment.
I used the command you provided to generate the HDR H.265 stream, and
tested with the same v4l2-ctrl command. Is there anything in the testing
details that I might have missed?
On 2026/5/11 17:20, Neil Armstrong wrote:
> This adds the plumbing to support decoding HEVC, VP9 and AV1
> streams into 10bit pixel formats, linear and compressed.
>
> This has only been tested on SM8550 & SM8650 with HEVC, and was
> inspired by Venus, DRM MSM and the downstream vidc driver for the
> buffer calculations and HFI messages.
>
> I was unable to get 10bit decoding working with ffmpeg since P010
> support for v4l2 decoding is missing, but v4l2-ctl works with:
> v4l2-ctl --verbose --set-fmt-video-out=pixelformat=HEVC --set-fmt-video=pixelformat=P010 --stream-mmap --stream-out-mmap --stream-from-hdr Big_Buck_Bunny_1080_10s_30MB_main10.h265.hdr --stream-to out.P010
> v4l2-ctl --verbose --set-fmt-video-out=pixelformat=HEVC --set-fmt-video=pixelformat=Q10C --stream-mmap --stream-out-mmap --stream-from-hdr Big_Buck_Bunny_1080_10s_30MB_main10.h265.hdr --stream-to out.QC10
>
> The non-10bit decoding still works as before.
>
> With Big_Buck_Bunny_1080_10s_30MB reencoded in 10-bit profile
> and tranformed in v4l2 header format with [1]:
> ffmpeg -i Big_Buck_Bunny_1080_10s_30MB.h264 -pix_fmt yuv420p10le -c:v libx265 -crf 28 -x265-params profile=main10 Big_Buck_Bunny_1080_10s_30MB_main10.h265
> /path/to/mkhdr.sh Big_Buck_Bunny_1080_10s_30MB_main10.h265 raw Big_Buck_Bunny_1080_10s_30MB_main10.h265.hdr
>
> Fluster HEVC results on SM8650:
>
> ./fluster.py run -ts JCT-VC-HEVC_V1 -d GStreamer-H.265-V4L2-Gst1.0 - 131/147
> The failing test case:
> - Pixel Format mismatch
> - TSUNEQBD_A_MAIN10_Technicolor_2 - Gstreamer waits NV12 but decoder returns P010
> - Unsupported resolution
> - PICSIZE_A_Bossen_1 - resolution is higher than max supported
> - PICSIZE_B_Bossen_1 - resolution is higher than max supported
> - WPP_D_ericsson_MAIN_2 - resolution is lower than min supported
> - WPP_D_ericsson_MAIN10_2 - resolution is lower than min supported
> - CRC mismatch
> - RAP_A_docomo_6
> - CRC mismatch - bitstream issue - fails with ffmpeg sw decoder as well
> - VPSSPSPPS_A_MainConcept_1
>
> v4l2-compliance results on SM8550 & SM8650:
>
> $ v4l2-compliance -d /dev/video1 -s
> v4l2-compliance 1.33.0-5456, 64 bits, 64-bit time_t
> v4l2-compliance SHA: 8aa593bda182 2026-04-11 10:54:25
>
> Compliance test for iris_driver device /dev/video1:
>
> Driver Info:
> Driver name : iris_driver
> Card type : Iris Encoder
> Bus info : platform:aa00000.video-codec
> Driver version : 7.0.0
> Capabilities : 0x84204000
> Video Memory-to-Memory Multiplanar
> Streaming
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x04204000
> Video Memory-to-Memory Multiplanar
> Streaming
> Extended Pix Format
> Detected Stateful Encoder
>
> Required ioctls:
> test VIDIOC_QUERYCAP: OK
> test invalid ioctls: OK
>
> Allow for multiple opens:
> test second /dev/video1 open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
> test for unlimited opens: OK
>
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> test VIDIOC_LOG_STATUS: OK (Not Supported)
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 0 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Control ioctls:
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> test VIDIOC_QUERYCTRL: OK
> test VIDIOC_G/S_CTRL: OK
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 43 Private Controls: 0
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK
> test VIDIOC_TRY_FMT: OK
> test VIDIOC_S_FMT: OK
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK
> test Composing: OK (Not Supported)
> test Scaling: OK (Not Supported)
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls:
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> test CREATE_BUFS maximum buffers: OK
> test VIDIOC_REMOVE_BUFS: OK
> test VIDIOC_EXPBUF: OK
> test Requests: OK (Not Supported)
> test blocking wait: OK
>
> Test input 0:
>
> Streaming ioctls:
> test read/write: OK (Not Supported)
> Video Capture Multiplanar: Captured 61 buffers
> test MMAP (select, REQBUFS): OK
> Video Capture Multiplanar: Captured 61 buffers
> test MMAP (epoll, REQBUFS): OK
> Video Capture Multiplanar: Captured 61 buffers
> test MMAP (select, CREATE_BUFS): OK
> Video Capture Multiplanar: Captured 61 buffers
> test MMAP (epoll, CREATE_BUFS): OK
> test USERPTR (select): OK (Not Supported)
> test DMABUF: Cannot test, specify --expbuf-device
>
> Total for iris_driver device /dev/video1: 54, Succeeded: 54, Failed: 0, Warnings: 0
>
> $ v4l2-compliance -d /dev/video0 -s5 --stream-from=test_video_10s.h264
> v4l2-compliance 1.33.0-5456, 64 bits, 64-bit time_t
> v4l2-compliance SHA: 8aa593bda182 2026-04-11 10:54:25
>
> Compliance test for iris_driver device /dev/video0:
>
> Driver Info:
> Driver name : iris_driver
> Card type : Iris Decoder
> Bus info : platform:aa00000.video-codec
> Driver version : 7.0.0
> Capabilities : 0x84204000
> Video Memory-to-Memory Multiplanar
> Streaming
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x04204000
> Video Memory-to-Memory Multiplanar
> Streaming
> Extended Pix Format
> Detected Stateful Decoder
>
> Required ioctls:
> test VIDIOC_QUERYCAP: OK
> test invalid ioctls: OK
>
> Allow for multiple opens:
> test second /dev/video0 open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
> test for unlimited opens: OK
>
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> test VIDIOC_LOG_STATUS: OK (Not Supported)
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 0 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Control ioctls:
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> test VIDIOC_QUERYCTRL: OK
> test VIDIOC_G/S_CTRL: OK
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 12 Private Controls: 0
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK (Not Supported)
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK
> test VIDIOC_TRY_FMT: OK
> test VIDIOC_S_FMT: OK
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK
> test Composing: OK
> test Scaling: OK (Not Supported)
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK
>
> Buffer ioctls:
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> test CREATE_BUFS maximum buffers: OK
> test VIDIOC_REMOVE_BUFS: OK
> test VIDIOC_EXPBUF: OK
> test Requests: OK (Not Supported)
> test blocking wait: OK
>
> Test input 0:
>
> Streaming ioctls:
> test read/write: OK (Not Supported)
> the input file is smaller than 7077888 bytes
> Video Capture Multiplanar: Captured 601 buffers
> test MMAP (select, REQBUFS): OK
> the input file is smaller than 7077888 bytes
> Video Capture Multiplanar: Captured 601 buffers
> test MMAP (epoll, REQBUFS): OK
> the input file is smaller than 7077888 bytes
> Video Capture Multiplanar: Captured 601 buffers
> test MMAP (select, CREATE_BUFS): OK
> the input file is smaller than 7077888 bytes
> Video Capture Multiplanar: Captured 601 buffers
> test MMAP (epoll, CREATE_BUFS): OK
> test USERPTR (select): OK (Not Supported)
> test DMABUF: Cannot test, specify --expbuf-device
>
> Total for iris_driver device /dev/video0: 54, Succeeded: 54, Failed: 0, Warnings: 0
>
> [1] https://github.com/superna9999/pyv4l2compliance
>
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---
> Changes in v3:
> - Added review tag on patch 1
> - Limited stride command to AV1 decoding only
> - Link to v2: https://patch.msgid.link/20260417-topic-sm8x50-iris-10bit-decoding-v2-0-c987b65a31d5@linaro.org
>
> Changes in v2:
> - Fixed bug breaking 8bit decoding
> - Dropped filtering on G_FMT while waiting for soure change
> - Dropped format filtering on ENUMFMT
> - Switched ALIGN(x, 192) to roundup(x, 192) because ALIGN works only with Power Of Two numbers
> - Cleaned and refactors the width/height/stride calculations
> - Cleaned and redesigned the buffer calculations functions with proper comments and var names
> - Passed fluster and v4l2-compliance to check for non regression
> - Tested on SM8550
> - Added missing V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN_10 with made gstreamer fail decoding
> - Link to v1: https://patch.msgid.link/20260408-topic-sm8x50-iris-10bit-decoding-v1-0-428c1ec2e3f3@linaro.org
>
> ---
> Neil Armstrong (6):
> media: qcom: iris: add helpers for 8bit and 10bit formats
> media: qcom: iris: add QC10C & P010 buffer size calculations
> media: qcom: iris: gen2: add support for 10bit decoding
> media: qcom: iris: vdec: update size and stride calculations for 10bit formats
> media: qcom: iris: vdec: update find_format to handle 8bit and 10bit formats
> media: qcom: iris: vdec: allow GEN2 decoding into 10bit format
>
> drivers/media/platform/qcom/iris/iris_buffer.c | 195 ++++++++++++++++++++-
> .../platform/qcom/iris/iris_hfi_gen2_command.c | 75 +++++++-
> .../platform/qcom/iris/iris_hfi_gen2_defines.h | 1 +
> .../platform/qcom/iris/iris_hfi_gen2_response.c | 37 +++-
> drivers/media/platform/qcom/iris/iris_instance.h | 2 +
> .../platform/qcom/iris/iris_platform_common.h | 1 +
> .../media/platform/qcom/iris/iris_platform_gen2.c | 8 +-
> drivers/media/platform/qcom/iris/iris_utils.c | 16 +-
> drivers/media/platform/qcom/iris/iris_utils.h | 2 +
> drivers/media/platform/qcom/iris/iris_vdec.c | 42 ++++-
> 10 files changed, 364 insertions(+), 15 deletions(-)
> ---
> base-commit: 76671814f2843482d97feca12e95c06f0b05bc8a
> change-id: 20260408-topic-sm8x50-iris-10bit-decoding-074c3ac7975c
>
> Best regards,
> --
> Neil Armstrong <neil.armstrong@linaro.org>
>
>
--
Best Regards,
Wangao
[-- Attachment #2: screenshot 2026-05-13 111131.png --]
[-- Type: image/png, Size: 1263431 bytes --]
next prev parent reply other threads:[~2026-05-13 8:50 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-11 9:20 [PATCH v3 0/6] media: qcom: iris: add support for decoding 10bit formats Neil Armstrong
2026-05-11 9:20 ` [PATCH v3 1/6] media: qcom: iris: add helpers for 8bit and " Neil Armstrong
2026-05-13 10:25 ` Dmitry Baryshkov
2026-05-11 9:20 ` [PATCH v3 2/6] media: qcom: iris: add QC10C & P010 buffer size calculations Neil Armstrong
2026-05-11 9:20 ` [PATCH v3 3/6] media: qcom: iris: gen2: add support for 10bit decoding Neil Armstrong
2026-05-13 10:38 ` Dmitry Baryshkov
2026-05-11 9:20 ` [PATCH v3 4/6] media: qcom: iris: vdec: update size and stride calculations for 10bit formats Neil Armstrong
2026-05-13 10:39 ` Dmitry Baryshkov
2026-05-11 9:20 ` [PATCH v3 5/6] media: qcom: iris: vdec: update find_format to handle 8bit and " Neil Armstrong
2026-05-13 10:47 ` Dmitry Baryshkov
2026-05-11 9:20 ` [PATCH v3 6/6] media: qcom: iris: vdec: allow GEN2 decoding into 10bit format Neil Armstrong
2026-05-13 10:45 ` Dmitry Baryshkov
2026-05-13 11:59 ` Neil Armstrong
2026-05-13 12:04 ` Dmitry Baryshkov
2026-05-13 8:50 ` Wangao Wang [this message]
2026-05-13 12:11 ` [PATCH v3 0/6] media: qcom: iris: add support for decoding 10bit formats Neil Armstrong
2026-05-13 16:02 ` Neil Armstrong
2026-05-13 16:04 ` Dmitry Baryshkov
2026-05-13 17:33 ` Vikash Garodia
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=fb377b11-c54c-4bd9-bf12-cf19d6484c66@oss.qualcomm.com \
--to=wangao.wang@oss.qualcomm.com \
--cc=abhinav.kumar@linux.dev \
--cc=bod@kernel.org \
--cc=dikshita.agarwal@oss.qualcomm.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=vikash.garodia@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox