From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from main.gmane.org ([80.91.229.2]:56401 "EHLO ciao.gmane.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752038AbZDULbj (ORCPT ); Tue, 21 Apr 2009 07:31:39 -0400 Received: from list by ciao.gmane.org with local (Exim 4.43) id 1LwECO-0001hX-4L for linux-media@vger.kernel.org; Tue, 21 Apr 2009 11:31:36 +0000 Received: from 41.226.123.118 ([41.226.123.118]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Tue, 21 Apr 2009 11:31:36 +0000 Received: from nizar.saied by 41.226.123.118 with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Tue, 21 Apr 2009 11:31:36 +0000 To: linux-media@vger.kernel.org From: nizar Subject: Re: [linux-dvb] technisat skystar usb 2.0 Date: Tue, 21 Apr 2009 12:32:56 +0200 Message-ID: References: <200904151251.09812.railis@juvepoland.com> Reply-To: nizar.saied@gmail.com Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 8bit In-Reply-To: <200904151251.09812.railis@juvepoland.com> Sender: linux-media-owner@vger.kernel.org List-ID: Dominik Sito wrote: > Monday 13 April 2009 17:31:29 nizar napisał(a): >> Please help needed. >> I have skystar usb 2.0 (13d0:2282) i have also the log of usbsnoop > (300 >> Mo) . >> What are steps to : >> >> 1- know if a firmware is needed. >> 2- if yes how to extract it. >> >> >> thank you >> Nizar >> >> >> _______________________________________________ >> linux-dvb users mailing list >> For V4L/DVB development, please use instead linux- > media@vger.kernel.org >> linux-dvb@linuxtv.org >> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > > Just give `lspci -vvv` and `lsusb -vvv` result. > Regards. > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Hi Dominik I have send the lspci and lsusb. I think that b2c2-flexcop-usb.c dont handle usb2.0 So if I suppose that the frontend is the same as those of skystar 2 pci the main tasks are : -1- Find the firmware of the pci-to-usb controller (Net ship 2282) -2- Change the b2c2-flexcop-usb.c to work with usb2.0 (bulk urb). result : -1- ====> Try to extract the firmware from the usbsnoop.log -2- ====> Not too hard.I trying to write b2c2-flexcop-usb2.c Thank you. Nizar Saied