HVR-1300 support lacking quality?

HVR-1300 support lacking quality?

[Jan Frey]

Hi all,

I've been a bit absent from this list recently and just checked the changes 
regarding v4l and dvb support of my HVR 1300 card. Actually I am a bit 
astonished that nothing really changed compared to a few months ago.
Please don't get me wrong, I absolutely don't want to offend anybody here - 
I really appreciate all the great work you are doing, but there is a few 
questions regarding HVR 1300 that come to my mind:

1. Why are the patches from http://linuxtv.org/hg/~rmcc/hvr-1300/ not 
included in the mainline? For me they enable usage of the HW MPEG encoder 
with MythTV and don't seem to introduce any problems.

2. I can't get DVB-T to work. All the modules load fine, scanning for 
channels fails, no channel can be tuned - no stations found. I tried to 
use dvbsnoop, only visible effect is the following line repeated in kernel 
log:

 cx8802_start_dma() Failed. Unsupported value in .mpeg (0x00000003)  

I think this has been reported earlier on this list.

3. The analog part of the card works only with some workaround in 
rc.sysinit: I have to unload all cx88 modules and reload them in order to 
get the analog tuner working. This has also been discussed on this list 
earlier. By googling I've read from various sources that the order of 
module loading makes a difference...


As mentioned above, this is not meant to be critics on your work, I'd just 
like to (re)-initiate some discussion on these topics and offer my help in 
debugging/testing of patches.

Thanks everybody!

Regards,
Jan

-- 
Jan Frey
linux [at] janfrey.de

--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

Re: HVR-1300 support lacking quality?

[Frej Drejhammar]

Hi Jan,

> 2. I can't get DVB-T to work. All the modules load fine, scanning for 
> channels fails, no channel can be tuned - no stations found. I tried to 
> use dvbsnoop, only visible effect is the following line repeated in kernel 
> log:
>
>  cx8802_start_dma() Failed. Unsupported value in .mpeg (0x00000003)  

DVB-T works fine for me unless I have used the HW MPEG encoder
beforehand. As the card is in a development machine which is mainly
used for digitizing composite video and occasionally used for DVB-T
software development (with a reboot in between) I have not
investigated it further... On the other hand, I only tune to a known
frequency and have not tried to scan for channels.

Regards,

--Frej

--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

Re: HVR-1300 support lacking quality?

[Steven Toth]

Frej Drejhammar wrote:
> Hi Jan,
> 
>> 2. I can't get DVB-T to work. All the modules load fine, scanning for 
>> channels fails, no channel can be tuned - no stations found. I tried to 
>> use dvbsnoop, only visible effect is the following line repeated in kernel 
>> log:
>>
>>  cx8802_start_dma() Failed. Unsupported value in .mpeg (0x00000003)  
> 
> DVB-T works fine for me unless I have used the HW MPEG encoder
> beforehand. As the card is in a development machine which is mainly
> used for digitizing composite video and occasionally used for DVB-T
> software development (with a reboot in between) I have not
> investigated it further... On the other hand, I only tune to a known
> frequency and have not tried to scan for channels.

Somebody was trashing GPIO's recently, try the tip and report back, it 
should be ok now.

- Steve

--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list