From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from lo.gmane.org ([80.91.229.12]:53356 "EHLO lo.gmane.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752642Ab0GENPI (ORCPT ); Mon, 5 Jul 2010 09:15:08 -0400 Received: from list by lo.gmane.org with local (Exim 4.69) (envelope-from ) id 1OVlVo-0004uO-93 for linux-media@vger.kernel.org; Mon, 05 Jul 2010 15:15:04 +0200 Received: from 5e07cbfa.bb.sky.com ([94.7.203.250]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Mon, 05 Jul 2010 15:15:04 +0200 Received: from jdg8tb by 5e07cbfa.bb.sky.com with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Mon, 05 Jul 2010 15:15:04 +0200 To: linux-media@vger.kernel.org From: JD Subject: Re: Fwd: Firmware for HVR-1110 Date: Mon, 5 Jul 2010 13:10:13 +0000 (UTC) Message-ID: References: <1278213195.3229.11.camel@pc07.localdom.local> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: hermann pitton arcor.de> writes: > > Hi JD,http://pastebin.ca/1894929 > > Am Samstag, den 03.07.2010, 03:32 +0100 schrieb JD: > > I'm confused as to what firmware in needed for the HVR-1110. > > > > Scouring the web, everywhere claims that the dvb-fe-tda10046 is > > required; however, dmesg logs show that this fails to be uploaded, and > > instead it is looking for dvb-fe-tda-10048: > > > > If I use tda-10048 then this seems to successfully loaded, but I am > > unable to find any channels with a scan; the dvb nodes within /dev/ > > are created and modules loaded, but dvbscan fails to tune. > > > > ------ > > dmesg > > -------- > > $ dmesg |grep firmware > > tda10048_firmware_upload: waiting for firmware upload > > (dvb-fe-tda10048-1.0.fw)... > > saa7134 0000:03:04.0: firmware: requesting dvb-fe-tda10048-1.0.fw > > tda10048_firmware_upload: firmware read 24878 bytes. > > tda10048_firmware_upload: firmware uploading > > tda10048_firmware_upload: firmware uploaded > > > > Any tips? > > Thanks. > > -- > > all variants of the HVR-1110 have a tda 10046. > > I can't see, how firmware loading can fail on auto detection of those > and even switch over to tda10048 as an alternative. > > Do you force some card = number and are maybe on a not yet detected > HVR-1120? > > Please provide the full dmesg log related to your card and make sure you > are on Michael Krufky's latest patches. > > Cheers, > Hermann > > Hi, thanks for the reply. To be sure that I hadn't set a certain card type somewhere, I used a clean install of a different OS (Linux Mint on a live USB); however, dmesg still shows that for some reason it is looking for the tda-10048 firmware. Here's the dmesg output: http://pastebin.ca/1894693 Here's the dmesg out after installing the tda10048 firmware if it is any help: http://pastebin.ca/1894929 I am able to find two or three analogue channels with tvtime, but no digital channels at all: dvbscan always says "tuning failed", and using vlc to search for dvb-t channels results in none. I do not have the patches you mention, as I am quite new to tv for linux, but I'll take a look shortly. My card is definitely the WinTV-HVR1110 as it states it on the card itself, but the packaging states HVR-1110.