From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from fg-out-1718.google.com ([72.14.220.159]:33260 "EHLO fg-out-1718.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752126AbZGALDI (ORCPT ); Wed, 1 Jul 2009 07:03:08 -0400 Received: by fg-out-1718.google.com with SMTP id e12so865065fga.17 for ; Wed, 01 Jul 2009 04:03:10 -0700 (PDT) Date: Wed, 01 Jul 2009 13:03:23 +0200 To: linux-media@vger.kernel.org Subject: Compro T750 - analog doesn't work ? From: Samuel Rakitnican Content-Type: text/plain; format=flowed; delsp=yes; charset=windows-1250 MIME-Version: 1.0 References: Content-Transfer-Encoding: 7bit Message-ID: In-Reply-To: Sender: linux-media-owner@vger.kernel.org List-ID: I have Slackware 12.2 with it's stock kernel (2.6.27.7-smp). I haven't done any modifications to system. Installed version of tvtime is 1.0.2. It asked for xc3028-v27.fw firmware file I've got it from a following link: http://www.linuxtv.org/wiki/index.php/Xceive_XC3028/XC2028 In tvtime Composite input is working. When I switch to Television it's showing blue screen with 'No signal' sign. After I restart from Windows, last viewed channel from a Windows app appears in tvtime, but if I try to change or scan channels nothing happens (it's showing the same channel every time). If I cold start the computer tvtime it's showing previously mentioned 'No signal' screen. Today (01.07.2009) I have installed latest v4l drivers using Mercurial hg, but the results are the same. If it help's below is a link on a forum thread on some other guy trying to get it work in Ubuntu with some more logs: http://ubuntuforums.org/archive/index.php/t-1092160.html Logs: ------------------------------------------------ ::lspci -vvnnn:: 00:0b.0 Multimedia controller [0480]: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev d1) Subsystem: Compro Technology, Inc. VideoMate T750 [185b:c900] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- GSI 19 (level, low) -> IRQ 19 saa7133[0]: found at 0000:00:0b.0, rev: 209, irq: 19, latency: 32, mmio: 0xdfffb800 saa7133[0]: subsystem: 185b:c900, board: Compro VideoMate T750 [card=139,autodetected] saa7133[0]: board init: gpio is 84bf00 saa7133[0]: i2c eeprom 00: 5b 18 00 c9 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 saa7133[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 03 01 08 ff 00 87 ff ff ff ff saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 40: ff d7 00 c4 86 1e 05 ff 02 c2 ff 01 c6 ff 05 ff saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff cb saa7133[0]: i2c eeprom 60: 35 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff tuner 1-0062: chip found @ 0xc4 (saa7133[0]) xc2028 1-0062: creating new instance xc2028 1-0062: type set to XCeive xc2028/xc3028 tuner firmware: requesting xc3028-v27.fw xc2028 1-0062: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 xc2028 1-0062: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. xc2028 1-0062: i2c output error: rc = -5 (should be 64) xc2028 1-0062: -5 returned from send xc2028 1-0062: Error -22 while loading base firmware xc2028 1-0062: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. xc2028 1-0062: i2c output error: rc = -5 (should be 64) xc2028 1-0062: -5 returned from send xc2028 1-0062: Error -22 while loading base firmware xc2028 1-0062: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. xc2028 1-0062: i2c output error: rc = -5 (should be 64) xc2028 1-0062: -5 returned from send xc2028 1-0062: Error -22 while loading base firmware xc2028 1-0062: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. xc2028 1-0062: i2c output error: rc = -5 (should be 64) xc2028 1-0062: -5 returned from send xc2028 1-0062: Error -22 while loading base firmware xc2028 1-0062: Error on line 1130: -5 saa7133[0]: registered device video0 [v4l2] saa7133[0]: registered device vbi0 saa7133[0]: registered device radio0 saa7134 ALSA driver for DMA sound loaded saa7133[0]/alsa: saa7133[0] at 0xdfffb800 irq 19 registered as card -1 xc2028 1-0062: Loading firmware for type=BASE FM (401), id 0000000000000000. xc2028 1-0062: i2c output error: rc = -5 (should be 64) xc2028 1-0062: -5 returned from send xc2028 1-0062: Error -22 while loading base firmware xc2028 1-0062: Loading firmware for type=BASE FM (401), id 0000000000000000. xc2028 1-0062: i2c output error: rc = -5 (should be 64) xc2028 1-0062: -5 returned from send xc2028 1-0062: Error -22 while loading base firmware xc2028 1-0062: Error on line 1130: -5 xc2028 1-0062: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000 . xc2028 1-0062: i2c output error: rc = -5 (should be 64) xc2028 1-0062: -5 returned from send xc2028 1-0062: Error -22 while loading base firmware xc2028 1-0062: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000 . xc2028 1-0062: i2c output error: rc = -5 (should be 64) xc2028 1-0062: -5 returned from send xc2028 1-0062: Error -22 while loading base firmware xc2028 1-0062: Error on line 1130: -5 xc2028 1-0062: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. xc2028 1-0062: i2c output error: rc = -5 (should be 64) xc2028 1-0062: -5 returned from send xc2028 1-0062: Error -22 while loading base firmware xc2028 1-0062: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. xc2028 1-0062: i2c output error: rc = -5 (should be 64) xc2028 1-0062: -5 returned from send xc2028 1-0062: Error -22 while loading base firmware xc2028 1-0062: Error on line 1130: -5