From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mout.gmx.net ([212.227.17.22]:56007 "EHLO mout.gmx.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S935513Ab3DIS6y (ORCPT ); Tue, 9 Apr 2013 14:58:54 -0400 Received: from mailout-eu.gmx.com ([10.1.101.214]) by mrigmx.server.lan (mrigmx001) with ESMTP (Nemesis) id 0MBpxx-1UGWw042wp-00Ar0x for ; Tue, 09 Apr 2013 20:58:52 +0200 Content-Type: text/plain; charset=utf-8; format=flowed; delsp=yes To: "Antti Palosaari" Subject: Re: AverTV_A918R (af9035-af9033-tda18218) / patch proposal References: <50E36298.3040009@iki.fi> <51645F09.9040901@iki.fi> Date: Tue, 09 Apr 2013 20:58:48 +0200 Cc: "linux-media@vger.kernel.org" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit From: Diorser Message-ID: In-Reply-To: <51645F09.9040901@iki.fi> Sender: linux-media-owner@vger.kernel.org List-ID: With RF signal input now clearly reported at 0000, antenna switch problem is a good assumption. However, I don't have the right skills to "sniff" and imagine which file should be modified and how. All I can do is recompiling git files and test. If a list a "GPIO" values was available somewhere, and if I know where to modify the files, and with some luck, a miracle could may be happen. However, I fully understand that an express card is too specific to create some interest. Don't worry about this. I just wanted to give some update on investigations done 3 months ago (quite some time spent on it....). Thanks. Rgds. > > Patch, which adds USB ID, is not acceptable unless device is know to be > working. It currently works only partially by loading correct modules > but tuning does not work. Surely, it is not very many lines code to fix > it - most likely just some GPIO setting (antenna switch?). > > regards > Antti