From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
To: "Nícolas F. R. A. Prado" <nfraprado@collabora.com>,
"Chen-Yu Tsai" <wenst@chromium.org>
Cc: matthias.bgg@gmail.com, robh+dt@kernel.org,
krzysztof.kozlowski+dt@linaro.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, kernel@collabora.com
Subject: Re: [PATCH 1/5] arm64: dts: mediatek: cherry: Add platform thermal configuration
Date: Mon, 24 Apr 2023 08:31:28 +0200 [thread overview]
Message-ID: <097d60ba-5604-a2c9-c6d2-121db2d55e36@collabora.com> (raw)
In-Reply-To: <5ede9421-54d6-4dda-91af-2acbf46c2d3e@notapiano>
Il 21/04/23 22:53, Nícolas F. R. A. Prado ha scritto:
> On Fri, Apr 21, 2023 at 03:37:52PM +0800, Chen-Yu Tsai wrote:
>> On Thu, Apr 20, 2023 at 5:45 PM AngeloGioacchino Del Regno
>> <angelogioacchino.delregno@collabora.com> wrote:
>>>
>>> This platform has three auxiliary NTC thermistors, connected to the
>>> SoC's ADC pins. Enable the auxadc in order to be able to read the
>>> ADC values, add a generic-adc-thermal LUT for each and finally assign
>>> them to the SoC's thermal zones.
>>>
>>> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
>>> ---
>>> .../boot/dts/mediatek/mt8195-cherry.dtsi | 105 ++++++++++++++++++
>>> 1 file changed, 105 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
>>> index 8ac80a136c37..0820e9ba3829 100644
>>> --- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
>>> +++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
>>> @@ -114,6 +114,77 @@ ppvar_sys: regulator-ppvar-sys {
>>> regulator-boot-on;
>>> };
>>>
>>> + /* Murata NCP03WF104F05RL */
>>> + tboard_thermistor1: thermal-sensor-t1 {
>>> + compatible = "generic-adc-thermal";
>>> + #thermal-sensor-cells = <0>;
>>> + io-channels = <&auxadc 0>;
>>> + io-channel-names = "sensor-channel";
>>> + temperature-lookup-table = < (-10000) 1553
>>> + (-5000) 1485
>>> + 0 1406
>>> + 5000 1317
>>> + 10000 1219
>>> + 15000 1115
>>> + 20000 1007
>>> + 25000 900
>>> + 30000 796
>>> + 35000 697
>>> + 40000 605
>>> + 45000 523
>>> + 50000 449
>>> + 55000 384
>>> + 60000 327
>>> + 65000 279
>>> + 70000 237
>>> + 75000 202
>>> + 80000 172
>>> + 85000 147
>>> + 90000 125
>>> + 95000 107
>>> + 100000 92
>>> + 105000 79
>>> + 110000 68
>>> + 115000 59
>>> + 120000 51
>>> + 125000 44>;
>>> + };
>>> +
>>> + tboard_thermistor2: thermal-sensor-t2 {
>>> + compatible = "generic-adc-thermal";
>>> + #thermal-sensor-cells = <0>;
>>> + io-channels = <&auxadc 1>;
>>> + io-channel-names = "sensor-channel";
>>> + temperature-lookup-table = < (-10000) 1553
>>> + (-5000) 1485
>>> + 0 1406
>>> + 5000 1317
>>> + 10000 1219
>>> + 15000 1115
>>> + 20000 1007
>>> + 25000 900
>>> + 30000 796
>>> + 35000 697
>>> + 40000 605
>>> + 45000 523
>>> + 50000 449
>>> + 55000 384
>>> + 60000 327
>>> + 65000 279
>>> + 70000 237
>>> + 75000 202
>>> + 80000 172
>>> + 85000 147
>>> + 90000 125
>>> + 95000 107
>>> + 100000 92
>>> + 105000 79
>>> + 110000 68
>>> + 115000 59
>>> + 120000 51
>>> + 125000 44>;
>>> + };
>>> +
>>> usb_vbus: regulator-5v0-usb-vbus {
>>> compatible = "regulator-fixed";
>>> regulator-name = "usb-vbus";
>>> @@ -260,6 +331,10 @@ &gpu {
>>> mali-supply = <&mt6315_7_vbuck1>;
>>> };
>>>
>>> +&auxadc {
>>> + status = "okay";
>>> +};
>>> +
>>> &i2c0 {
>>> status = "okay";
>>>
>>> @@ -1098,6 +1173,36 @@ mt6315_7_vbuck1: vbuck1 {
>>> };
>>> };
>>>
>>> +&thermal_zones {
>>> + soc_area_ntc {
>
> Not sure if that's what's causing the issue, but the thermal zone name should
> end with -thermal as per the binding. Also note that it needs to be under 20
> characters otherwise it will fail to be registered with -22 like below.
> (Also, node names shouldn't contain underscore)
>
> Thanks,
> Nícolas
>
>>> + polling-delay = <1000>;
>>> + polling-delay-passive = <250>;
>>> + thermal-sensors = <&tboard_thermistor1>;
>>> +
>>> + trips {
>>> + trip-crit {
>>> + temperature = <95000>;
>>> + hysteresis = <2000>;
>>> + type = "critical";
>>> + };
>>> + };
>>> + };
>>> +
>>> + pmic_area_ntc {
>>> + polling-delay = <1000>;
>>> + polling-delay-passive = <0>;
>>> + thermal-sensors = <&tboard_thermistor2>;
>>> +
>>> + trips {
>>> + trip-crit {
>>> + temperature = <95000>;
>>> + hysteresis = <2000>;
>>> + type = "critical";
>>> + };
>>> + };
>>> + };
>>
>> I'm still getting:
>>
>> thermal_sys: Failed to find 'trips' node
>> thermal_sys: Failed to find trip points for thermal-sensor-t1 id=0
>> generic-adc-thermal thermal-sensor-t1: Thermal zone sensor register failed: -22
>> generic-adc-thermal: probe of thermal-sensor-t1 failed with error -22
>> thermal_sys: Failed to find 'trips' node
>> thermal_sys: Failed to find trip points for thermal-sensor-t2 id=0
>> generic-adc-thermal thermal-sensor-t2: Thermal zone sensor register failed: -22
>> generic-adc-thermal: probe of thermal-sensor-t2 failed with error -22
>> thermal_sys: Failed to find 'trips' node
>> thermal_sys: Failed to find trip points for thermal-sensor-t3 id=0
>> generic-adc-thermal thermal-sensor-t3: Thermal zone sensor register failed: -22
>> generic-adc-thermal: probe of thermal-sensor-t3 failed with error -22
>>
I think you have something wrong locally - there's no thermal-sensor-t3 in this
devicetree...
Cheers,
Angelo
next prev parent reply other threads:[~2023-04-24 6:31 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-20 9:44 [PATCH 0/5] MT8195 Acer Tomato - devicetrees Part 3 AngeloGioacchino Del Regno
2023-04-20 9:44 ` [PATCH 1/5] arm64: dts: mediatek: cherry: Add platform thermal configuration AngeloGioacchino Del Regno
2023-04-21 7:37 ` Chen-Yu Tsai
2023-04-21 20:53 ` Nícolas F. R. A. Prado
2023-04-24 6:31 ` AngeloGioacchino Del Regno [this message]
2023-04-24 7:38 ` Chen-Yu Tsai
2023-04-24 7:40 ` AngeloGioacchino Del Regno
2023-04-20 9:44 ` [PATCH 2/5] arm64: dts: mediatek: cherry: Assign dp-intf aliases AngeloGioacchino Del Regno
2023-04-21 6:46 ` Chen-Yu Tsai
2023-04-24 7:03 ` AngeloGioacchino Del Regno
2023-04-24 7:17 ` Chen-Yu Tsai
2023-04-24 7:19 ` AngeloGioacchino Del Regno
2023-04-20 9:44 ` [PATCH 3/5] arm64: dts: mediatek: cherry: Configure eDP and internal display AngeloGioacchino Del Regno
2023-04-21 6:57 ` Chen-Yu Tsai
2023-04-20 9:44 ` [PATCH 4/5] arm64: dts: mediatek: cherry: Enable PCI-Express ports for WiFi AngeloGioacchino Del Regno
2023-04-21 7:07 ` Chen-Yu Tsai
2023-04-20 9:44 ` [PATCH 5/5] arm64: dts: mediatek: cherry-tomato-r1: Enable NVMe PCI-Express port AngeloGioacchino Del Regno
2023-04-21 7:59 ` Chen-Yu Tsai
2023-04-24 8:13 ` AngeloGioacchino Del Regno
2023-04-24 9:40 ` Chen-Yu Tsai
2023-04-24 9:59 ` AngeloGioacchino Del Regno
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=097d60ba-5604-a2c9-c6d2-121db2d55e36@collabora.com \
--to=angelogioacchino.delregno@collabora.com \
--cc=devicetree@vger.kernel.org \
--cc=kernel@collabora.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=nfraprado@collabora.com \
--cc=robh+dt@kernel.org \
--cc=wenst@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox