[PATCH v4 0/3] Add Mediatek SoC RTC driver

From: Eddie Huang <eddie.huang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
To: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
	Alessandro Zummo
	<a.zummo-BfzFCNDTiLLj+vYz1yj4TQ@public.gmane.org>,
	Alexandre Belloni
	<alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Cc: Samuel Ortiz <sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>,
	srv_heupstream-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org,
	Mauro Carvalho Chehab
	<mchehab-JPH+aEBZ4P+UEJcrhfAQsw@public.gmane.org>,
	rtc-linux-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
	Greg KH
	<gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org>,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Joe Perches <joe-6d6DIl74uiNBDgjK7y7TUQ@public.gmane.org>,
	Tomasz Figa <tfiga-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>,
	linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
	Matthias Brugger
	<matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Tejun Heo <tj-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Andrew Morton
	<akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>,
	"David S. Miller" <davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org>,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [PATCH v4 0/3] Add Mediatek SoC RTC driver
Date: Wed, 6 May 2015 15:23:39 +0800	[thread overview]
Message-ID: <1430897022-63357-1-git-send-email-eddie.huang@mediatek.com> (raw)

RTC is one submodule of Mediatek MT6397 PMIC chip[1]. This series
support RTC driver that work with Mediatek SoC like MT8135, MT8173.
It implements second counter and also provide alarm function.

This series base on 4.1-rc1, Test ok on MT8173 platform.

[1] https://lkml.org/lkml/2015/1/23/325

Change in v4:
1. Align mt6397-core.c resource in straight lines.
2. Modify mtk_rtc_write_trigger according Joe Perches and
   Alexandre Belloni suggestion.
3. Align function parameters to the open parenthesis.
4. Modify MAINTAINER to use file full name.

Change in v3:
1. Replace magic number in mt6397-core.c
2. Add comment for some equation and write trigger.
3. Use regmap_bulk_read and regmap_bulk_write to avoid muliple regmap_read
   and regmap_write
4. Replace devm_request_threaded_irq with request_threaded_irq and add
   irq_dispose_mapping
5. Fix Tomasz Figa review comment.

Change in v2:
1. Move RTC address and interrupt to mt6397-core.c, and register
   these resource in mfd_cell.
   http://lists.infradead.org/pipermail/linux-arm-kernel/2015-February/323239.html
2. Remove dt-binding document due to register resouce in mfd_cell, not from
   device tree.
3. Update MAINTAINER file to add Mediatek RTC mainainter.
4. Add prefix mtk_ to some internal functions.
5. Fix racy condition
6. Check return value of regmap_read and regmap_write
7. Remove some unnecessary register readback, clear, then write.
8. Add disable alarm in mtk_rtc_set_alarm function
9. Fix Uwe Kleine-König review comment

Eddie Huang (2):
  mfd: provide RTC resource in MT6397 MFD
  MAINTAINERS: add Mediatek RTC driver

Tianping Fang (1):
  rtc: mediatek: Add MT6397 RTC driver

 MAINTAINERS               |   7 +
 drivers/mfd/mt6397-core.c |  18 +++
 drivers/rtc/Kconfig       |  10 ++
 drivers/rtc/Makefile      |   1 +
 drivers/rtc/rtc-mt6397.c  | 394 ++++++++++++++++++++++++++++++++++++++++++++++
 5 files changed, 430 insertions(+)
 create mode 100644 drivers/rtc/rtc-mt6397.c

--
1.8.1.1.dirty

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek