From: Chunfeng Yun <chunfeng.yun@mediatek.com>
To: Mathias Nyman <mathias.nyman@intel.com>
Cc: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Felipe Balbi <balbi@ti.com>,
Chunfeng Yun <chunfeng.yun@mediatek.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Roger Quadros <rogerq@ti.com>,
linux-usb@vger.kernel.org, linux-mediatek@lists.infradead.org,
John Crispin <blogic@openwrt.org>,
Daniel Kurtz <djkurtz@chromium.org>
Subject: [PATCH v3 5/5] arm64: dts: mediatek: add xHCI & usb phy for mt8173
Date: Wed, 22 Jul 2015 22:05:45 +0800 [thread overview]
Message-ID: <1437573945-31586-6-git-send-email-chunfeng.yun@mediatek.com> (raw)
In-Reply-To: <1437573945-31586-1-git-send-email-chunfeng.yun@mediatek.com>
add xHCI and phy drivers for MT8173-EVB
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 15 ++++++++++++++
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 31 +++++++++++++++++++++++++++++
2 files changed, 46 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index f433c21..202b2b9 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -13,6 +13,7 @@
*/
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include "mt8173.dtsi"
/ {
@@ -32,6 +33,15 @@
};
chosen { };
+
+ usb_p1_vbus: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&pio 130 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
};
&pwrap {
@@ -211,3 +221,8 @@
&uart0 {
status = "okay";
};
+
+&usb {
+ vusb33-supply = <&mt6397_vusb_reg>;
+ vbus-supply = <&usb_p1_vbus>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 0696f8f..aa1ecc7 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -14,6 +14,7 @@
#include <dt-bindings/clock/mt8173-clk.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/mt8173-power.h>
#include <dt-bindings/reset-controller/mt8173-resets.h>
#include "mt8173-pinfunc.h"
@@ -393,6 +394,36 @@
#size-cells = <0>;
status = "disabled";
};
+
+ usb: usb30@11270000 {
+ compatible = "mediatek,mt8173-xhci";
+ reg = <0 0x11270000 0 0x4000>,
+ <0 0x11280000 0 0x0800>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
+ clocks = <&topckgen CLK_TOP_USB30_SEL>,
+ <&pericfg CLK_PERI_USB0>,
+ <&pericfg CLK_PERI_USB1>;
+ clock-names = "sys_mac",
+ "wakeup_deb_p0",
+ "wakeup_deb_p1";
+ phys = <&u3phy 0>, <&u3phy 1>;
+ phy-names = "phy-0", "phy-1";
+ usb3-lpm-capable;
+ mediatek,usb-wakeup = <&pericfg>;
+ mediatek,wakeup-src = <1>;
+ mediatek,u2port-num = <2>;
+ status = "okay";
+ };
+
+ u3phy: usb-phy@11290000 {
+ compatible = "mediatek,mt8173-u3phy";
+ reg = <0 0x11290000 0 0x3000>;
+ clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
+ clock-names = "u3phya_ref";
+ #phy-cells = <1>;
+ status = "okay";
+ };
};
};
--
1.8.1.1.dirty
next prev parent reply other threads:[~2015-07-22 14:05 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-22 14:05 (unknown), Chunfeng Yun
2015-07-22 14:05 ` [PATCH v3 1/5] dt-bindings: Add usb3.0 phy binding for MT65xx SoCs Chunfeng Yun
2015-07-22 14:05 ` [PATCH v3 2/5] dt-bindings: Add a binding for Mediatek xHCI host controller Chunfeng Yun
2015-07-22 14:22 ` Mark Rutland
2015-07-26 3:45 ` chunfeng yun
2015-07-31 13:37 ` Mark Rutland
2015-08-01 3:42 ` chunfeng yun
[not found] ` <1437573945-31586-1-git-send-email-chunfeng.yun-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2015-07-22 14:05 ` [PATCH v3 3/5] usb: phy: add usb3.0 phy driver for mt65xx SoCs Chunfeng Yun
[not found] ` <1437573945-31586-4-git-send-email-chunfeng.yun-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2015-07-22 14:21 ` Felipe Balbi
[not found] ` <20150722142157.GA10467-HgARHv6XitJaoMGHk7MhZQC/G2K4zDHf@public.gmane.org>
2015-07-26 2:51 ` chunfeng yun
2015-07-28 5:47 ` Kishon Vijay Abraham I
2015-07-31 12:25 ` chunfeng yun
2015-07-31 14:18 ` Kishon Vijay Abraham I
[not found] ` <55BB83BF.6040105-l0cyMroinI0@public.gmane.org>
2015-08-01 2:42 ` chunfeng yun
2015-07-27 13:58 ` Ricky Liang
[not found] ` <CAAJzSMe0dhg9Su_Lpjiq58ukQhairyasaDEK-tBiuTtNV8hygg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-07-31 12:32 ` chunfeng yun
2015-07-22 14:05 ` [PATCH v3 4/5] xhci: mediatek: support MTK xHCI host controller Chunfeng Yun
2015-07-22 14:05 ` Chunfeng Yun [this message]
2015-07-22 18:11 ` [PATCH v3 5/5] arm64: dts: mediatek: add xHCI & usb phy for mt8173 Sergei Shtylyov
[not found] ` <55AFDCE6.2060608-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
2015-07-26 2:41 ` chunfeng yun
2015-07-23 1:18 ` [PATCH v3 0/5] Mediatek xHCI support chunfeng yun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1437573945-31586-6-git-send-email-chunfeng.yun@mediatek.com \
--to=chunfeng.yun@mediatek.com \
--cc=balbi@ti.com \
--cc=blogic@openwrt.org \
--cc=devicetree@vger.kernel.org \
--cc=djkurtz@chromium.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-usb@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mathias.nyman@intel.com \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
--cc=rogerq@ti.com \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox