From: John Crispin <blogic@openwrt.org>
To: Lee Jones <lee.jones@linaro.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>,
linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
John Crispin <blogic@openwrt.org>
Subject: [PATCH V3 3/4] mfd: mt6397: add support for different Slave types
Date: Wed, 27 Jan 2016 12:47:37 +0100 [thread overview]
Message-ID: <1453895258-44369-3-git-send-email-blogic@openwrt.org> (raw)
In-Reply-To: <1453895258-44369-1-git-send-email-blogic@openwrt.org>
Signed-off-by: John Crispin <blogic@openwrt.org>
---
drivers/mfd/mt6397-core.c | 58 ++++++++++++++++++++++++++++++++-------------
1 file changed, 41 insertions(+), 17 deletions(-)
diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c
index 75ad0fe..aa91606 100644
--- a/drivers/mfd/mt6397-core.c
+++ b/drivers/mfd/mt6397-core.c
@@ -24,6 +24,9 @@
#define MT6397_RTC_BASE 0xe000
#define MT6397_RTC_SIZE 0x3e
+#define MT6391_CID_CODE 0x91
+#define MT6397_CID_CODE 0x97
+
static const struct resource mt6397_rtc_resources[] = {
{
.start = MT6397_RTC_BASE,
@@ -232,39 +235,60 @@ static SIMPLE_DEV_PM_OPS(mt6397_pm_ops, mt6397_irq_suspend,
static int mt6397_probe(struct platform_device *pdev)
{
int ret;
- struct mt6397_chip *mt6397;
+ unsigned int id;
+ struct mt6397_chip *pmic;
- mt6397 = devm_kzalloc(&pdev->dev, sizeof(*mt6397), GFP_KERNEL);
- if (!mt6397)
+ pmic = devm_kzalloc(&pdev->dev, sizeof(*pmic), GFP_KERNEL);
+ if (!pmic)
return -ENOMEM;
- mt6397->dev = &pdev->dev;
- mt6397->int_con[0] = MT6397_INT_CON0;
- mt6397->int_con[1] = MT6397_INT_CON1;
- mt6397->int_status[0] = MT6397_INT_STATUS0;
- mt6397->int_status[1] = MT6397_INT_STATUS1;
+ pmic->dev = &pdev->dev;
/*
* mt6397 MFD is child device of soc pmic wrapper.
* Regmap is set from its parent.
*/
- mt6397->regmap = dev_get_regmap(pdev->dev.parent, NULL);
- if (!mt6397->regmap)
+ pmic->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!pmic->regmap)
return -ENODEV;
- platform_set_drvdata(pdev, mt6397);
+ platform_set_drvdata(pdev, pmic);
+
+ ret = regmap_read(pmic->regmap, MT6397_CID, &id);
+ if (ret) {
+ dev_err(pmic->dev, "Failed to read chip id: %d\n", ret);
+ goto fail_irq;
+ }
+
+ switch (id & 0xff) {
+ case MT6397_CID_CODE:
+ case MT6391_CID_CODE:
+ pmic->int_con[0] = MT6397_INT_CON0;
+ pmic->int_con[1] = MT6397_INT_CON1;
+ pmic->int_status[0] = MT6397_INT_STATUS0;
+ pmic->int_status[1] = MT6397_INT_STATUS1;
+ ret = mfd_add_devices(&pdev->dev, -1, mt6397_devs,
+ ARRAY_SIZE(mt6397_devs), NULL, 0, NULL);
+ break;
+
+ default:
+ dev_err(&pdev->dev, "unsupported chip: %d\n", id);
+ ret = -ENODEV;
+ break;
+ }
- mt6397->irq = platform_get_irq(pdev, 0);
- if (mt6397->irq > 0) {
- ret = mt6397_irq_init(mt6397);
+ pmic->irq = platform_get_irq(pdev, 0);
+ if (pmic->irq > 0) {
+ ret = mt6397_irq_init(pmic);
if (ret)
return ret;
}
- ret = mfd_add_devices(&pdev->dev, -1, mt6397_devs,
- ARRAY_SIZE(mt6397_devs), NULL, 0, NULL);
- if (ret)
+fail_irq:
+ if (ret) {
+ irq_domain_remove(pmic->irq_domain);
dev_err(&pdev->dev, "failed to add child devices: %d\n", ret);
+ }
return ret;
}
--
1.7.10.4
next prev parent reply other threads:[~2016-01-27 11:47 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-27 11:47 [PATCH V3 1/4] dt-bindings: mfd: Add bindings for the MediaTek MT6323 PMIC John Crispin
2016-01-27 11:47 ` [PATCH V3 2/4] mfd: mt6397: int_con and int_status may vary in location John Crispin
[not found] ` <1453895258-44369-2-git-send-email-blogic-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
2016-02-10 16:59 ` Lee Jones
2016-01-27 11:47 ` John Crispin [this message]
2016-02-10 16:59 ` [PATCH V3 3/4] mfd: mt6397: add support for different Slave types Lee Jones
2016-01-27 11:47 ` [PATCH V3 4/4] mfd: mt6397: add MT6323 support to MT6397 driver John Crispin
2016-02-10 16:59 ` Lee Jones
2016-02-01 15:41 ` [PATCH V3 1/4] dt-bindings: mfd: Add bindings for the MediaTek MT6323 PMIC Rob Herring
2016-02-10 16:58 ` Lee Jones
2016-02-10 17:01 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1453895258-44369-3-git-send-email-blogic@openwrt.org \
--to=blogic@openwrt.org \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox