public inbox for linux-mediatek@lists.infradead.org
 help / color / mirror / Atom feed
From: Erin Lo <erin.lo-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
To: Matthias Brugger <matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	srv_heupstream-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org,
	Erin Lo <erin.lo-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	Honghui Zhang
	<honghui.zhang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [PATCH v2 2/6] arm: dts: mt2701: Add iommu/smi device node
Date: Fri, 13 Jan 2017 16:42:54 +0800	[thread overview]
Message-ID: <1484296978-18572-3-git-send-email-erin.lo@mediatek.com> (raw)
In-Reply-To: <1484296978-18572-1-git-send-email-erin.lo-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>

From: Honghui Zhang <honghui.zhang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>

Add the device node of iommu and smi for MT2701.

Signed-off-by: Honghui Zhang <honghui.zhang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Signed-off-by: Erin Lo <erin.lo-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
 arch/arm/boot/dts/mt2701.dtsi | 54 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)

diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index eb4c6fd..87be52c 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -17,6 +17,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/reset/mt2701-resets.h>
+#include <dt-bindings/memory/mt2701-larb-port.h>
 #include "skeleton64.dtsi"
 #include "mt2701-pinfunc.h"
 
@@ -161,6 +162,16 @@
 		clock-names = "system-clk", "rtc-clk";
 	};
 
+	smi_common: smi@1000c000 {
+		compatible = "mediatek,mt2701-smi-common";
+		reg = <0 0x1000c000 0 0x1000>;
+		clocks = <&infracfg CLK_INFRA_SMI>,
+			 <&mmsys CLK_MM_SMI_COMMON>,
+			 <&infracfg CLK_INFRA_SMI>;
+		clock-names = "apb", "smi", "async";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+	};
+
 	sysirq: interrupt-controller@10200100 {
 		compatible = "mediatek,mt2701-sysirq",
 			     "mediatek,mt6577-sysirq";
@@ -170,6 +181,16 @@
 		reg = <0 0x10200100 0 0x1c>;
 	};
 
+	iommu: mmsys_iommu@10205000 {
+		compatible = "mediatek,mt2701-m4u";
+		reg = <0 0x10205000 0 0x1000>;
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infracfg CLK_INFRA_M4U>;
+		clock-names = "bclk";
+		mediatek,larbs = <&larb0 &larb1 &larb2>;
+		#iommu-cells = <1>;
+	};
+
 	apmixedsys: syscon@10209000 {
 		compatible = "mediatek,mt2701-apmixedsys", "syscon";
 		reg = <0 0x10209000 0 0x1000>;
@@ -272,18 +293,51 @@
 		#clock-cells = <1>;
 	};
 
+	larb0: larb@14010000 {
+		compatible = "mediatek,mt2701-smi-larb";
+		reg = <0 0x14010000 0 0x1000>;
+		mediatek,smi = <&smi_common>;
+		mediatek,larbidx = <0>;
+		clocks = <&mmsys CLK_MM_SMI_LARB0>,
+			 <&mmsys CLK_MM_SMI_LARB0>;
+		clock-names = "apb", "smi";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+	};
+
 	imgsys: syscon@15000000 {
 		compatible = "mediatek,mt2701-imgsys", "syscon";
 		reg = <0 0x15000000 0 0x1000>;
 		#clock-cells = <1>;
 	};
 
+	larb2: larb@15001000 {
+		compatible = "mediatek,mt2701-smi-larb";
+		reg = <0 0x15001000 0 0x1000>;
+		mediatek,smi = <&smi_common>;
+		mediatek,larbidx = <2>;
+		clocks = <&imgsys CLK_IMG_SMI_COMM>,
+			 <&imgsys CLK_IMG_SMI_COMM>;
+		clock-names = "apb", "smi";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+	};
+
 	vdecsys: syscon@16000000 {
 		compatible = "mediatek,mt2701-vdecsys", "syscon";
 		reg = <0 0x16000000 0 0x1000>;
 		#clock-cells = <1>;
 	};
 
+	larb1: larb@16010000 {
+		compatible = "mediatek,mt2701-smi-larb";
+		reg = <0 0x16010000 0 0x1000>;
+		mediatek,smi = <&smi_common>;
+		mediatek,larbidx = <1>;
+		clocks = <&vdecsys CLK_VDEC_CKGEN>,
+			 <&vdecsys CLK_VDEC_LARB>;
+		clock-names = "apb", "smi";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>;
+	};
+
 	hifsys: syscon@1a000000 {
 		compatible = "mediatek,mt2701-hifsys", "syscon";
 		reg = <0 0x1a000000 0 0x1000>;
-- 
1.9.1

  parent reply	other threads:[~2017-01-13  8:42 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-13  8:42 [PATCH v2 0/6] Add some DT nodes for Mediatek MT2701 Erin Lo
     [not found] ` <1484296978-18572-1-git-send-email-erin.lo-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2017-01-13  8:42   ` [PATCH v2 1/6] arm: dts: mt2701: Add spi device node Erin Lo
     [not found]     ` <1484296978-18572-2-git-send-email-erin.lo-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2017-01-13 15:29       ` Matthias Brugger
2017-01-13  8:42   ` Erin Lo [this message]
2017-01-13 15:05     ` [PATCH v2 2/6] arm: dts: mt2701: Add iommu/smi " Matthias Brugger
2017-01-16  2:54       ` Honghui Zhang
2017-01-13  8:42   ` [PATCH v2 4/6] arm: dts: mt2701: Add auxadc " Erin Lo
2017-01-13 15:29     ` Matthias Brugger
2017-01-13  8:42   ` [PATCH v2 5/6] arm: dts: mt2701: Add ethernet " Erin Lo
     [not found]     ` <1484296978-18572-6-git-send-email-erin.lo-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2017-01-14 10:32       ` John Crispin
2017-01-14 16:10         ` Sean Wang
2017-01-13  8:42 ` [PATCH v2 3/6] arm: dts: mt2701: Add nand " Erin Lo
2017-01-13 15:29   ` Matthias Brugger
2017-01-13  8:42 ` [PATCH v2 6/6] arm: dts: mt2701: Add thermal " Erin Lo
2017-01-13 15:27   ` Matthias Brugger
2017-01-16  3:44     ` Dawei Chien
2017-01-16  3:46       ` Dawei Chien

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1484296978-18572-3-git-send-email-erin.lo@mediatek.com \
    --to=erin.lo-nus5lvnupcjwk0htik3j/w@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=honghui.zhang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=srv_heupstream-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox