From: Stu Hsieh <stu.hsieh@mediatek.com>
To: CK Hu <ck.hu@mediatek.com>
Cc: srv_heupstream@mediatek.com, David Airlie <airlied@linux.ie>,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
linux-mediatek@lists.infradead.org,
Matthias Brugger <matthias.bgg@gmail.com>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v1 11/15] drm/mediatek: add dummy buffer for RDMA memory mode
Date: Thu, 2 Aug 2018 19:45:14 +0800 [thread overview]
Message-ID: <1533210314.11190.69.camel@mtksdccf07> (raw)
In-Reply-To: <1532497379.9280.32.camel@mtksdaap41>
Hi, CK:
On Wed, 2018-07-25 at 13:42 +0800, CK Hu wrote:
> Hi, Stu:
>
> On Tue, 2018-07-24 at 16:17 +0800, Stu Hsieh wrote:
> > This patch add dummy buffer for RDMA memory mode
> >
> > When display power on, the drm frame work would modeset and
> > set up the display HW.
> >
> > In this time, the RDMA would start wroking and read the data from memory.
> > But, user space not send the data to drm yet.
> >
> > For this case, if user space not send data to display hw(RDMA) yet,
> > RDMA would read the wrong address to show garbage.
> >
> > Therefore, we create dummy buffer for RDMA reading memory
> > when userspace not send the data yet.
> >
>
> Is this the only solution? If panel resolution is 1920x1080, the buffer
> size is 8294400 bytes. How large it is. If we have another solution,
> I'll not accept this one. As far as I know, DSI or DPI could output
> single color even though there is no input data. If this is true, when
> encoder is enabled, it output the single color. When crtc enable, config
> all setting except 'start'. When receive the buffer, 'start' the
> pipeline which include encoder. When encoder 'start', it disable the
> single color function and output the data from input.
>
> Regards,
> CK
>
I would remove dummy_buffer patch.
Your idea "use encoder black pattern before the first buffer coming" can
work.
But it need also move "rdma memory mode setting" to layer_config.
Therefore, when cmdq patch accepted, I will commit another patch set to
fix the garbage output to panel.
>
> > Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com>
> > ---
> > drivers/gpu/drm/mediatek/mtk_disp_rdma.c | 23 +++++++++++++++++++++++
> > drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 1 +
> > 2 files changed, 24 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/mediatek/mtk_disp_rdma.c b/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
> > index 8d41f5cd485b..e28f368728cd 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
> > @@ -20,6 +20,7 @@
> >
> > #include "mtk_drm_crtc.h"
> > #include "mtk_drm_ddp_comp.h"
> > +#include "mtk_drm_gem.h"
> >
> > #define DISP_REG_RDMA_INT_ENABLE 0x0000
> > #define DISP_REG_RDMA_INT_STATUS 0x0004
> > @@ -59,6 +60,9 @@
> > #define MEM_MODE_INPUT_FORMAT_UYVY (0x004 << 4)
> > #define MEM_MODE_INPUT_FORMAT_YUYV (0x005 << 4)
> >
> > +#define RDMA_DUMMY_BUFFER_SIZE(h, v) ((h) * (v) * 4)
> > +#define RDMA_DUMMY_BUFFER_PITCH(h) ((h) * 4)
> > +
> > struct mtk_disp_rdma_data {
> > unsigned int fifo_size;
> > };
> > @@ -74,6 +78,7 @@ struct mtk_disp_rdma {
> > const struct mtk_disp_rdma_data *data;
> > struct drm_device *drm_dev;
> > bool rdma_memory_mode;
> > + unsigned int dummy_size;
> > };
> >
> > static inline struct mtk_disp_rdma *comp_to_rdma(struct mtk_ddp_comp *comp)
> > @@ -126,14 +131,29 @@ static void mtk_rdma_disable_vblank(struct mtk_ddp_comp *comp)
> >
> > static void mtk_rdma_start(struct mtk_ddp_comp *comp)
> > {
> > + struct mtk_disp_rdma *rdma = comp_to_rdma(comp);
> > + bool *rdma_memory_mode = comp->comp_mode;
> > +
> > + if (*rdma_memory_mode == true) {
> > + comp->mtk_gem = mtk_drm_gem_create(rdma->drm_dev,
> > + rdma->dummy_size, false);
> > + writel(comp->mtk_gem->dma_addr & 0xFFFFFFFF,
> > + comp->regs + DISP_RDMA_MEM_START_ADDR);
> > + }
> > +
> > rdma_update_bits(comp, DISP_REG_RDMA_GLOBAL_CON, RDMA_ENGINE_EN,
> > RDMA_ENGINE_EN);
> > }
> >
> > static void mtk_rdma_stop(struct mtk_ddp_comp *comp)
> > {
> > + bool *rdma_memory_mode = comp->comp_mode;
> > +
> > writel(RDMA_SOFT_RESET, comp->regs + DISP_REG_RDMA_GLOBAL_CON);
> > writel(0, comp->regs + DISP_REG_RDMA_GLOBAL_CON);
> > +
> > + if (*rdma_memory_mode == true)
> > + mtk_drm_gem_free_object(&comp->mtk_gem->base);
> > }
> >
> > static void mtk_rdma_config(struct mtk_ddp_comp *comp, unsigned int width,
> > @@ -149,8 +169,11 @@ static void mtk_rdma_config(struct mtk_ddp_comp *comp, unsigned int width,
> > rdma_update_bits(comp, DISP_REG_RDMA_SIZE_CON_1, 0xfffff, height);
> >
> > if (*rdma_memory_mode == true) {
> > + rdma->dummy_size = RDMA_DUMMY_BUFFER_SIZE(width, height);
> > rdma_update_bits(comp, DISP_REG_RDMA_SIZE_CON_0, 0xff0000,
> > MATRIX_INT_MTX_SEL_DEFAULT);
> > + writel(RDMA_DUMMY_BUFFER_PITCH(width),
> > + comp->regs + DISP_RDMA_MEM_SRC_PITCH);
> > rdma_update_bits(comp, DISP_REG_RDMA_GLOBAL_CON,
> > RDMA_MODE_MEMORY, RDMA_MODE_MEMORY);
> > }
> > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> > index a1988ce15141..6dbb83144a74 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> > +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> > @@ -92,6 +92,7 @@ struct mtk_ddp_comp {
> > int irq;
> > struct device *larb_dev;
> > enum mtk_ddp_comp_id id;
> > + struct mtk_drm_gem_obj *mtk_gem;
> > const struct mtk_ddp_comp_funcs *funcs;
> > void *comp_mode;
> > };
>
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2018-08-02 11:45 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-24 8:17 [PATCH v1 00/15] Add RDMA memory mode support for mediatek SOC MT2712 Stu Hsieh
2018-07-24 8:17 ` [PATCH v1 01/15] drm/mediatek: add connection from RDMA0 to DPI1 Stu Hsieh
2018-07-24 8:17 ` [PATCH v1 02/15] drm/mediatek: add connection from RDMA0 to DSI1 Stu Hsieh
2018-07-24 8:17 ` [PATCH v1 03/15] drm/mediatek: add connection from RDMA1 to DSI0 Stu Hsieh
2018-07-24 8:17 ` [PATCH v1 04/15] drm/mediatek: add connection from RDMA2 " Stu Hsieh
2018-07-24 8:17 ` [PATCH v1 05/15] drm/mediatek: add RDMA memory mode for crtc created Stu Hsieh
2018-07-24 8:17 ` [PATCH v1 06/15] drm/mediatek: add memory mode for RDMA Stu Hsieh
2018-07-25 2:40 ` CK Hu
2018-08-02 11:36 ` Stu Hsieh
2018-08-03 7:30 ` CK Hu
2018-07-24 8:17 ` [PATCH v1 07/15] drm/mediatek: add layer config to set RDMA for plane setting Stu Hsieh
2018-07-24 8:17 ` [PATCH v1 08/15] drm/mediatek: add RGB color format support for RDMA Stu Hsieh
2018-07-24 8:17 ` [PATCH v1 09/15] drm/mediatek: add YUYV/UYVY " Stu Hsieh
2018-07-24 8:17 ` [PATCH v1 10/15] drm/mediatek: add drm_device in RDMA for mamory mode to reaquest buffer Stu Hsieh
2018-07-24 8:17 ` [PATCH v1 11/15] drm/mediatek: add dummy buffer for RDMA memory mode Stu Hsieh
2018-07-25 5:42 ` CK Hu
2018-08-02 11:45 ` Stu Hsieh [this message]
2018-07-24 8:17 ` [PATCH v1 12/15] drm/mediatek: add layer number condition for RDMA to control plane Stu Hsieh
2018-07-25 3:02 ` CK Hu
2018-08-02 11:38 ` Stu Hsieh
2018-07-24 8:17 ` [PATCH v1 13/15] drm/mediatek: Update some variable name from ovl to comp Stu Hsieh
2018-07-24 8:17 ` [PATCH v1 14/15] drm/mediatek: fixed the error value for add DSI1 in mutex Stu Hsieh
2018-07-25 5:10 ` CK Hu
2018-08-02 11:39 ` Stu Hsieh
2018-07-24 8:17 ` [PATCH v1 15/15] drm/mediatek: fixed connection from RDMA2 to DSI1 Stu Hsieh
2018-07-25 1:39 ` [PATCH v1 00/15] Add RDMA memory mode support for mediatek SOC MT2712 CK Hu
2018-08-02 11:29 ` Stu Hsieh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1533210314.11190.69.camel@mtksdccf07 \
--to=stu.hsieh@mediatek.com \
--cc=airlied@linux.ie \
--cc=ck.hu@mediatek.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=srv_heupstream@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).