From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jungo Lin Subject: [RFC V1 04/12] dt-bindings: mt8183: Added camera ISP Pass 1 Date: Thu, 28 Mar 2019 17:56:39 +0800 Message-ID: <1553767007-11909-5-git-send-email-jungo.lin@mediatek.com> References: <1553767007-11909-1-git-send-email-jungo.lin@mediatek.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1553767007-11909-1-git-send-email-jungo.lin@mediatek.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: tfiga@chromium.org, hans.verkuil@cisco.com, laurent.pinchart+renesas@ideasonboard.com, matthias.bgg@gmail.com, mchehab@kernel.org Cc: Sean.Cheng@mediatek.com, Rynn.Wu@mediatek.com, srv_heupstream@mediatek.com, holmes.chiou@mediatek.com, ryan.yu@mediatek.com, Jerry-ch.Chen@mediatek.com, frankie.chiu@mediatek.com, jungo.lin@mediatek.com, sj.huang@mediatek.com, yuzhao@chromium.org, christie.yu@mediatek.com, seraph.huang@mediatek.com, zwisler@chromium.org, linux-mediatek@lists.infradead.org, frederic.chen@mediatek.com, linux-arm-kernel@lists.infradead.org, linux-media@vger.kernel.org List-Id: linux-mediatek@lists.infradead.org This patch adds DT binding document for the Pass 1 (P1) unit in Mediatek's camera ISP system. The Pass 1 unit grabs the sensor data out from the sensor interface, applies ISP effects and writes the image data to DRAM. Signed-off-by: Jungo Lin --- .../devicetree/bindings/media/mediatek,camisp.txt | 59 ++++++++++++++++++++++ 1 file changed, 59 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/mediatek,camisp.txt diff --git a/Documentation/devicetree/bindings/media/mediatek,camisp.txt b/Documentation/devicetree/bindings/media/mediatek,camisp.txt new file mode 100644 index 0000000..5af1e3c --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek,camisp.txt @@ -0,0 +1,59 @@ +* Mediatek Image Signal Processor Pass 1 (ISP P1) + +The Pass 1 unit of Mediatek's camera ISP system grabs the sensor data out +from the sensor interface, applies ISP effects and writes the image data +to DRAM. Furthermore, Pass 1 unit has the ability to output two different +resolutions frames at the same time to increase the performance of the +camera application. + +Required properties: +- compatible: must be "mediatek,mt8183-camisp" for MT8183. +- reg: must contain an entry for each entry in reg-names. +- interrupts: interrupt number to the cpu. +- iommus: shall point to the respective IOMMU block with master port + as argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt + for details. +- power-domains : a phandle to the power domain of this local arbiter. +- mediatek,smi : a phandle to the smi_common node. +- clocks: device clocks, see + Documentation/devicetree/bindings/clock/clock-bindings.txt for details. +- clock-names: must be "CAMSYS_CAM_CGPDN" and "CAMSYS_CAMTG_CGPDN". +- mediatek,larb: must contain the local arbiters in the current SOCs, see + Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt + for details. +- mediatek,scp : the node of system control processor (SCP). +- smem_device : the shared memory device managing the shared memory between + Pass 1 unit and the video processor unit. + +Example: + camisp: camisp@1a000000 { + compatible = "mediatek,mt8183-camisp", "syscon"; + reg = <0 0x1a000000 0 0x1000>, + <0 0x1a003000 0 0x1000>, + <0 0x1a004000 0 0x2000>, + <0 0x1a006000 0 0x2000>; + reg-names = "camisp", + "cam1", + "cam2", + "cam3"; + interrupts = , + , + ; + interrupt-names = "cam1", + "cam2", + "cam3"; + iommus = <&iommu M4U_PORT_CAM_LSCI0>, + <&iommu M4U_PORT_CAM_LSCI1>, + <&iommu M4U_PORT_CAM_BPCI>; + #clock-cells = <1>; + power-domains = <&scpsys MT8183_POWER_DOMAIN_CAM>; + /* Camera CCF */ + clocks = <&camsys CLK_CAM_CAM>, + <&camsys CLK_CAM_CAMTG>; + clock-names = "CAMSYS_CAM_CGPDN", + "CAMSYS_CAMTG_CGPDN"; + mediatek,larb = <&larb3>, + <&larb6>; + mediatek,scp = <&scp>; + smem_device = <&cam_smem>; + }; -- 1.9.1