From: CK Hu <ck.hu@mediatek.com>
To: Jitao Shi <jitao.shi@mediatek.com>
Cc: srv_heupstream@mediatek.com, David Airlie <airlied@linux.ie>,
stonea168@163.com, cawa.cheng@mediatek.com,
dri-devel@lists.freedesktop.org, sj.huang@mediatek.com,
linux-mediatek@lists.infradead.org,
Matthias Brugger <matthias.bgg@gmail.com>,
yingjoe.chen@mediatek.com, eddie.huang@mediatek.com
Subject: Re: [PATCH v7 2/9] drm/mediatek: fixes CMDQ reg address of mt8173 is different with mt2701
Date: Thu, 26 Sep 2019 16:50:07 +0800 [thread overview]
Message-ID: <1569487807.9612.0.camel@mtksdaap41> (raw)
In-Reply-To: <20190919065806.111016-3-jitao.shi@mediatek.com>
Hi, Jitao:
On Thu, 2019-09-19 at 14:57 +0800, Jitao Shi wrote:
> Config the different CMDQ reg address in driver data.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
>
> Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
> ---
> drivers/gpu/drm/mediatek/mtk_dsi.c | 27 ++++++++++++++++++++++-----
> 1 file changed, 22 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
> index 52b49daeed9f..7e24d03cdccc 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> @@ -123,7 +123,6 @@
> #define VM_CMD_EN BIT(0)
> #define TS_VFP_EN BIT(5)
>
> -#define DSI_CMDQ0 0x180
> #define CONFIG (0xff << 0)
> #define SHORT_PACKET 0
> #define LONG_PACKET 2
> @@ -148,6 +147,10 @@
>
> struct phy;
>
> +struct mtk_dsi_driver_data {
> + const u32 reg_cmdq_off;
> +};
> +
> struct mtk_dsi {
> struct mtk_ddp_comp ddp_comp;
> struct device *dev;
> @@ -174,6 +177,7 @@ struct mtk_dsi {
> bool enabled;
> u32 irq_data;
> wait_queue_head_t irq_wait_queue;
> + const struct mtk_dsi_driver_data *driver_data;
> };
>
> static inline struct mtk_dsi *encoder_to_dsi(struct drm_encoder *e)
> @@ -936,6 +940,7 @@ static void mtk_dsi_cmdq(struct mtk_dsi *dsi, const struct mipi_dsi_msg *msg)
> const char *tx_buf = msg->tx_buf;
> u8 config, cmdq_size, cmdq_off, type = msg->type;
> u32 reg_val, cmdq_mask, i;
> + u32 reg_cmdq_off = dsi->driver_data->reg_cmdq_off;
>
> if (MTK_DSI_HOST_IS_READ(type))
> config = BTA;
> @@ -955,9 +960,9 @@ static void mtk_dsi_cmdq(struct mtk_dsi *dsi, const struct mipi_dsi_msg *msg)
> }
>
> for (i = 0; i < msg->tx_len; i++)
> - writeb(tx_buf[i], dsi->regs + DSI_CMDQ0 + cmdq_off + i);
> + writeb(tx_buf[i], dsi->regs + reg_cmdq_off + cmdq_off + i);
>
> - mtk_dsi_mask(dsi, DSI_CMDQ0, cmdq_mask, reg_val);
> + mtk_dsi_mask(dsi, reg_cmdq_off, cmdq_mask, reg_val);
> mtk_dsi_mask(dsi, DSI_CMDQ_SIZE, CMDQ_SIZE, cmdq_size);
> }
>
> @@ -1101,6 +1106,8 @@ static int mtk_dsi_probe(struct platform_device *pdev)
> if (ret)
> goto err_unregister_host;
>
> + dsi->driver_data = of_device_get_match_data(dev);
> +
> dsi->engine_clk = devm_clk_get(dev, "engine");
> if (IS_ERR(dsi->engine_clk)) {
> ret = PTR_ERR(dsi->engine_clk);
> @@ -1194,9 +1201,19 @@ static int mtk_dsi_remove(struct platform_device *pdev)
> return 0;
> }
>
> +static const struct mtk_dsi_driver_data mt8173_dsi_driver_data = {
> + .reg_cmdq_off = 0x200,
> +};
> +
> +static const struct mtk_dsi_driver_data mt2701_dsi_driver_data = {
> + .reg_cmdq_off = 0x180,
> +};
> +
> static const struct of_device_id mtk_dsi_of_match[] = {
> - { .compatible = "mediatek,mt2701-dsi" },
> - { .compatible = "mediatek,mt8173-dsi" },
> + { .compatible = "mediatek,mt2701-dsi",
> + .data = &mt2701_dsi_driver_data },
> + { .compatible = "mediatek,mt8173-dsi",
> + .data = &mt8173_dsi_driver_data },
> { },
> };
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2019-09-26 8:50 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-19 6:57 [PATCH v7 0/9] Support dsi for mt8183 Jitao Shi
2019-09-19 6:57 ` [PATCH v7 1/9] drm/mediatek: move mipi_dsi_host_register to probe Jitao Shi
2019-09-19 6:57 ` [PATCH v7 2/9] drm/mediatek: fixes CMDQ reg address of mt8173 is different with mt2701 Jitao Shi
2019-09-26 8:50 ` CK Hu [this message]
2019-09-19 6:58 ` [PATCH v7 3/9] drm/mediatek: replace writeb() with mtk_dsi_mask() Jitao Shi
2019-09-26 8:50 ` CK Hu
2019-09-19 6:58 ` [PATCH v7 4/9] drm/mediatek: add dsi reg commit disable control Jitao Shi
2019-09-19 6:58 ` [PATCH v7 5/9] drm/mediatek: add frame size control Jitao Shi
2019-09-19 6:58 ` [PATCH v7 6/9] drm/mediatek: add mt8183 dsi driver support Jitao Shi
2019-09-19 6:58 ` [PATCH v7 7/9] drm/mediatek: change the dsi phytiming calculate method Jitao Shi
2019-09-26 8:51 ` CK Hu
2019-12-12 13:53 ` Enric Balletbo Serra
2019-12-12 22:47 ` Ryan Case
2019-12-13 2:45 ` CK Hu
2019-09-19 6:58 ` [PATCH v7 8/9] drm: mediatek: adjust dsi and mipi_tx probe sequence Jitao Shi
2019-09-19 6:58 ` [PATCH v7 9/9] drm/mediatek: add dphy reset after setting lanes number Jitao Shi
2019-09-26 8:52 ` CK Hu
2019-09-27 1:35 ` [PATCH v7 0/9] Support dsi for mt8183 CK Hu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1569487807.9612.0.camel@mtksdaap41 \
--to=ck.hu@mediatek.com \
--cc=airlied@linux.ie \
--cc=cawa.cheng@mediatek.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=eddie.huang@mediatek.com \
--cc=jitao.shi@mediatek.com \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=sj.huang@mediatek.com \
--cc=srv_heupstream@mediatek.com \
--cc=stonea168@163.com \
--cc=yingjoe.chen@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox