Re: [PATCH v6, 13/14] drm/mediatek: add fifo_size into rdma private data

CK Hu
2020-01-02T05:21:08Z

Hi, Yongqiang:

On Thu, 2020-01-02 at 12:00 +0800, Yongqiang Niu wrote:
> the fifo size of rdma in mt8183 is different.
> rdma0 fifo size is 5k
> rdma1 fifo size is 2k
>
> Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
> ---
> drivers/gpu/drm/mediatek/mtk_disp_rdma.c | 21 ++++++++++++++++++++-
> 1 file changed, 20 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_rdma.c b/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
> index 405afef..691480b 100644
> --- a/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
> +++ b/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
> @@ -62,6 +62,7 @@ struct mtk_disp_rdma {
> struct mtk_ddp_comp ddp_comp;
> struct drm_crtc *crtc;
> const struct mtk_disp_rdma_data *data;
> + u32 fifo_size;
> };
>
> static inline struct mtk_disp_rdma *comp_to_rdma(struct mtk_ddp_comp *comp)
> @@ -130,10 +131,16 @@ static void mtk_rdma_config(struct mtk_ddp_comp *comp, unsigned int width,
> unsigned int threshold;
> unsigned int reg;
> struct mtk_disp_rdma *rdma = comp_to_rdma(comp);
> + u32 rdma_fifo_size;
>
> rdma_update_bits(comp, DISP_REG_RDMA_SIZE_CON_0, 0xfff, width);
> rdma_update_bits(comp, DISP_REG_RDMA_SIZE_CON_1, 0xfffff, height);
>
> + if (rdma->fifo_size)
> + rdma_fifo_size = rdma->fifo_size;
> + else
> + rdma_fifo_size = RDMA_FIFO_SIZE(rdma);
> +
> /*
> * Enable FIFO underflow since DSI and DPI can't be blocked.
> * Keep the FIFO pseudo size reset default of 8 KiB. Set the
> @@ -142,7 +149,7 @@ static void mtk_rdma_config(struct mtk_ddp_comp *comp, unsigned int width,
> */
> threshold = width * height * vrefresh * 4 * 7 / 1000000;
> reg = RDMA_FIFO_UNDERFLOW_EN |
> - RDMA_FIFO_PSEUDO_SIZE(RDMA_FIFO_SIZE(rdma)) |
> + RDMA_FIFO_PSEUDO_SIZE(rdma_fifo_size) |
> RDMA_OUTPUT_VALID_FIFO_THRESHOLD(threshold);
> writel(reg, comp->regs + DISP_REG_RDMA_FIFO_CON);
> }
> @@ -284,6 +291,18 @@ static int mtk_disp_rdma_probe(struct platform_device *pdev)
> return comp_id;
> }
>
> + if (of_find_property(dev->of_node, "mediatek,rdma_fifo_size", &ret)) {

"mediatek,rdma_fifo_size" does not exists in binding document.

> + ret = of_property_read_u32(dev->of_node,
> + "mediatek,rdma_fifo_size",
> + &priv->fifo_size);
> + if (ret) {
> + dev_err(dev, "Failed to get rdma fifo size\n");
> + return ret;
> + }
> +
> + priv->fifo_size *= SZ_1K;

Why not define fifo_size in 'bytes' ?

Regards,
CK

> + }
> +
> ret = mtk_ddp_comp_init(dev, dev->of_node, &priv->ddp_comp, comp_id,
> &mtk_disp_rdma_funcs);
> if (ret) {