[PATCH v5 07/13] soc: mediatek: cmdq: add write_s function

Dennis YC Hsieh
2020-03-08T11:03:44Z

add write_s function in cmdq helper functions which
writes value contains in internal register to address
with large dma access support.

Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
---
drivers/soc/mediatek/mtk-cmdq-helper.c | 34 +++++++++++++++++++++++-
include/linux/mailbox/mtk-cmdq-mailbox.h | 2 ++
include/linux/soc/mediatek/mtk-cmdq.h | 20 ++++++++++++++
3 files changed, 55 insertions(+), 1 deletion(-)

diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index 33153d17c9d9..90f1ff2b4b00 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -18,6 +18,10 @@ struct cmdq_instruction {
union {
u32 value;
u32 mask;
+ struct {
+ u16 arg_c;
+ u16 src_reg;
+ };
};
union {
u16 offset;
@@ -29,7 +33,7 @@ struct cmdq_instruction {
struct {
u8 sop:5;
u8 arg_c_t:1;
- u8 arg_b_t:1;
+ u8 src_t:1;
u8 dst_t:1;
};
};
@@ -222,6 +226,34 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
}
EXPORT_SYMBOL(cmdq_pkt_write_mask);

+int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
+ u16 addr_low, u16 src_reg_idx, u32 mask)
+{
+ struct cmdq_instruction inst = { {0} };
+ int err;
+
+ if (mask != U32_MAX) {
+ inst.op = CMDQ_CODE_MASK;
+ inst.mask = ~mask;
+ err = cmdq_pkt_append_command(pkt, inst);
+ if (err < 0)
+ return err;
+
+ inst.mask = 0;
+ inst.op = CMDQ_CODE_WRITE_S_MASK;
+ } else {
+ inst.op = CMDQ_CODE_WRITE_S;
+ }
+
+ inst.src_t = CMDQ_REG_TYPE;
+ inst.sop = high_addr_reg_idx;
+ inst.offset = addr_low;
+ inst.src_reg = src_reg_idx;
+
+ return cmdq_pkt_append_command(pkt, inst);
+}
+EXPORT_SYMBOL(cmdq_pkt_write_s);
+
int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)
{
struct cmdq_instruction inst = { {0} };
diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
index 121c3bb6d3de..8ef87e1bd03b 100644
--- a/include/linux/mailbox/mtk-cmdq-mailbox.h
+++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
@@ -59,6 +59,8 @@ enum cmdq_code {
CMDQ_CODE_JUMP = 0x10,
CMDQ_CODE_WFE = 0x20,
CMDQ_CODE_EOC = 0x40,
+ CMDQ_CODE_WRITE_S = 0x90,
+ CMDQ_CODE_WRITE_S_MASK = 0x91,
CMDQ_CODE_LOGIC = 0xa0,
};

diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 83340211e1d3..c72d826d8934 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -12,6 +12,8 @@
#include <linux/timer.h>

#define CMDQ_NO_TIMEOUT 0xffffffffu
+#define CMDQ_ADDR_HIGH(addr) ((u32)(((addr) >> 16) & GENMASK(31, 0)))
+#define CMDQ_ADDR_LOW(addr) ((u16)(addr) | BIT(1))

struct cmdq_pkt;

@@ -102,6 +104,24 @@ int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value);
int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
u16 offset, u32 value, u32 mask);

+/**
+ * cmdq_pkt_write_s() - append write_s command to the CMDQ packet
+ * @pkt: the CMDQ packet
+ * @high_addr_reg_idx: internal regisger ID which contains high address of pa
+ * @addr_low: low address of pa
+ * @src_reg_idx: the CMDQ internal register ID which cache source value
+ * @mask: the specified target address mask, use U32_MAX if no need
+ *
+ * Return: 0 for success; else the error code is returned
+ *
+ * Support write value to physical address without subsys. Use CMDQ_ADDR_HIGH()
+ * to get high addrees and call cmdq_pkt_assign() to assign value into internal
+ * reg. Also use CMDQ_ADDR_LOW() to get low address for addr_low parameterwhen
+ * call to this function.
+ */
+int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
+ u16 addr_low, u16 src_reg_idx, u32 mask);
+
/**
* cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
* @pkt: the CMDQ packet
--
2.18.0