[PATCH v4 4/4] ARM: dts: mediatek: Modified MT7629 PCIe node

chuanjia.liu
2020-07-21T07:53:20Z

Remove unused property and add pciecfg node.

Acked-by:Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: chuanjia.liu <Chuanjia.Liu@mediatek.com>
---
arch/arm/boot/dts/mt7629-rfb.dts | 3 ++-
arch/arm/boot/dts/mt7629.dtsi | 23 +++++++++++++----------
2 files changed, 15 insertions(+), 11 deletions(-)

diff --git a/arch/arm/boot/dts/mt7629-rfb.dts b/arch/arm/boot/dts/mt7629-rfb.dts
index 9980c10c6e29..eb536cbebd9b 100644
--- a/arch/arm/boot/dts/mt7629-rfb.dts
+++ b/arch/arm/boot/dts/mt7629-rfb.dts
@@ -140,9 +140,10 @@
};
};

-&pcie {
+&pcie1 {
pinctrl-names = "default";
pinctrl-0 = <&pcie_pins>;
+ status = "okay";
};

&pciephy1 {
diff --git a/arch/arm/boot/dts/mt7629.dtsi b/arch/arm/boot/dts/mt7629.dtsi
index 5cbb3d244c75..94567307b842 100644
--- a/arch/arm/boot/dts/mt7629.dtsi
+++ b/arch/arm/boot/dts/mt7629.dtsi
@@ -360,16 +360,21 @@
#reset-cells = <1>;
};

- pcie: pcie@1a140000 {
+ pciecfg: pciecfg@1a140000 {
+ compatible = "mediatek,mt7629-pciecfg", "syscon";
+ reg = <0x1a140000 0x1000>;
+ };
+
+ pcie1: pcie@1a145000 {
compatible = "mediatek,mt7629-pcie";
device_type = "pci";
- reg = <0x1a140000 0x1000>,
- <0x1a145000 0x1000>;
- reg-names = "subsys","port1";
+ reg = <0x1a145000 0x1000>;
+ reg-names = "port1";
+ mediatek,pcie-cfg = <&pciecfg>;
#address-cells = <3>;
#size-cells = <2>;
- interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "pcie_irq";
clocks = <&pciesys CLK_PCIE_P1_MAC_EN>,
<&pciesys CLK_PCIE_P0_AHB_EN>,
<&pciesys CLK_PCIE_P1_AUX_EN>,
@@ -390,21 +395,19 @@
power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
bus-range = <0x00 0xff>;
ranges = <0x82000000 0 0x20000000 0x20000000 0 0x10000000>;
+ status = "disabled";

- pcie1: pcie@1,0 {
- device_type = "pci";
+ slot1: pcie@1,0 {
reg = <0x0800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
- num-lanes = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie_intc1 0>,
<0 0 0 2 &pcie_intc1 1>,
<0 0 0 3 &pcie_intc1 2>,
<0 0 0 4 &pcie_intc1 3>;
-
pcie_intc1: interrupt-controller {
interrupt-controller;