From: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
To: Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>
Cc: devicetree@vger.kernel.org, srv_heupstream@mediatek.com,
Stephen Boyd <sboyd@kernel.org>,
linux-arm-msm@vger.kernel.org,
Liam Girdwood <lgirdwood@gmail.com>,
linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org,
Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/3] regulator: bindings: Add document for MT6315 regulator
Date: Mon, 3 Aug 2020 16:57:26 +0800 [thread overview]
Message-ID: <1596445047-2975-3-git-send-email-hsin-hsiung.wang@mediatek.com> (raw)
In-Reply-To: <1596445047-2975-1-git-send-email-hsin-hsiung.wang@mediatek.com>
Add device tree binding information for mt6315 regulator driver.
Example bindings for mt6315 are added.
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
---
.../bindings/regulator/mt6315-regulator.txt | 45 ++++++++++++++++++++++
1 file changed, 45 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/mt6315-regulator.txt
diff --git a/Documentation/devicetree/bindings/regulator/mt6315-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6315-regulator.txt
new file mode 100644
index 0000000..1c14537
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mt6315-regulator.txt
@@ -0,0 +1,45 @@
+Mediatek MT6315 Regulator
+
+Required properties:
+- compatible: Must be one of the following.
+ "mediatek,mt6315_3-regulator"
+ "mediatek,mt6315_6-regulator"
+ "mediatek,mt6315_7-regulator"
+- reg: SPMI slave id.
+- regulators: List of regulators provided by this controller.
+ The definition for each of these nodes is defined using the standard binding
+ for regulators at Documentation/devicetree/bindings/regulator/regulator.txt.
+
+The valid names for regulators are:
+BUCK:
+ vbuck1, vbuck3, vbuck4
+
+Example:
+ mt6315_3: mt6315@3 {
+ compatible = "mediatek,mt6315_3-regulator";
+ reg = <0x3 0 0xb 1>;
+
+ mt6315_3_vbuck1: vbuck1 {
+ regulator-compatible = "vbuck1";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1193750>;
+ regulator-enable-ramp-delay = <256>;
+ regulator-allowed-modes = <0 1 2 4>;
+ };
+
+ mt6315_3_vbuck3: vbuck3 {
+ regulator-compatible = "vbuck3";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1193750>;
+ regulator-enable-ramp-delay = <256>;
+ regulator-allowed-modes = <0 1 2 4>;
+ };
+
+ mt6315_3_vbuck3: vbuck3 {
+ regulator-compatible = "vbuck3";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1193750>;
+ regulator-enable-ramp-delay = <256>;
+ regulator-allowed-modes = <0 1 2 4>;
+ };
+ };
--
2.6.4
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
next prev parent reply other threads:[~2020-08-03 8:57 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-03 8:57 [PATCH 0/3] Add support for MT6315 regulator Hsin-Hsiung Wang
2020-08-03 8:57 ` [PATCH 1/3] spmi: Add driver shutdown support Hsin-Hsiung Wang
2020-08-04 1:51 ` Nicolas Boichat
2020-08-03 8:57 ` Hsin-Hsiung Wang [this message]
2020-08-04 2:12 ` [PATCH 2/3] regulator: bindings: Add document for MT6315 regulator Nicolas Boichat
2020-08-17 21:18 ` Rob Herring
2020-08-03 8:57 ` [PATCH 3/3] regulator: mt6315: Add support " Hsin-Hsiung Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1596445047-2975-3-git-send-email-hsin-hsiung.wang@mediatek.com \
--to=hsin-hsiung.wang@mediatek.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=srv_heupstream@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox