From: CK Hu <ck.hu@mediatek.com>
To: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Rob Herring <robh+dt@kernel.org>,
linux-mediatek@lists.infradead.org,
Matthias Brugger <matthias.bgg@gmail.com>,
Collabora Kernel ML <kernel@collabora.com>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 3/3] arm64: dts: mt8183: Add display nodes for MT8183
Date: Thu, 10 Dec 2020 15:01:09 +0800 [thread overview]
Message-ID: <1607583669.2269.2.camel@mtksdaap41> (raw)
In-Reply-To: <20201127104930.1981497-4-enric.balletbo@collabora.com>
Hi, Enric:
On Fri, 2020-11-27 at 11:49 +0100, Enric Balletbo i Serra wrote:
> Add display subsystem device nodes to allow video output.
>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
>
> arch/arm64/boot/dts/mediatek/mt8183.dtsi | 114 +++++++++++++++++++++++
> 1 file changed, 114 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> index ba9ff192cda3..34d83f517b07 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> @@ -6,6 +6,7 @@
> */
>
> #include <dt-bindings/clock/mt8183-clk.h>
> +#include <dt-bindings/gce/mt8173-gce.h>
This should be
#include <dt-bindings/gce/mt8183-gce.h>
Regards,
CK
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/memory/mt8183-larb-port.h>
> @@ -33,6 +34,11 @@ aliases {
> i2c9 = &i2c9;
> i2c10 = &i2c10;
> i2c11 = &i2c11;
> + ovl0 = &ovl0;
> + ovl-2l0 = &ovl_2l0;
> + ovl-2l1 = &ovl_2l1;
> + rdma0 = &rdma0;
> + rdma1 = &rdma1;
> };
>
> cpus {
> @@ -964,6 +970,107 @@ mmsys: syscon@14000000 {
> #clock-cells = <1>;
> };
>
> + ovl0: ovl@14008000 {
> + compatible = "mediatek,mt8183-disp-ovl";
> + reg = <0 0x14008000 0 0x1000>;
> + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>;
> + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
> + clocks = <&mmsys CLK_MM_DISP_OVL0>;
> + iommus = <&iommu M4U_PORT_DISP_OVL0>;
> + mediatek,larb = <&larb0>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x8000 0x1000>;
> + };
> +
> + ovl_2l0: ovl@14009000 {
> + compatible = "mediatek,mt8183-disp-ovl-2l";
> + reg = <0 0x14009000 0 0x1000>;
> + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_LOW>;
> + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
> + clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
> + iommus = <&iommu M4U_PORT_DISP_2L_OVL0_LARB0>;
> + mediatek,larb = <&larb0>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>;
> + };
> +
> + ovl_2l1: ovl@1400a000 {
> + compatible = "mediatek,mt8183-disp-ovl-2l";
> + reg = <0 0x1400a000 0 0x1000>;
> + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_LOW>;
> + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
> + clocks = <&mmsys CLK_MM_DISP_OVL1_2L>;
> + iommus = <&iommu M4U_PORT_DISP_2L_OVL1_LARB0>;
> + mediatek,larb = <&larb0>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xa000 0x1000>;
> + };
> +
> + rdma0: rdma@1400b000 {
> + compatible = "mediatek,mt8183-disp-rdma";
> + reg = <0 0x1400b000 0 0x1000>;
> + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>;
> + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
> + clocks = <&mmsys CLK_MM_DISP_RDMA0>;
> + iommus = <&iommu M4U_PORT_DISP_RDMA0>;
> + mediatek,larb = <&larb0>;
> + mediatek,rdma_fifo_size = <5120>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>;
> + };
> +
> + rdma1: rdma@1400c000 {
> + compatible = "mediatek,mt8183-disp-rdma";
> + reg = <0 0x1400c000 0 0x1000>;
> + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
> + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
> + clocks = <&mmsys CLK_MM_DISP_RDMA1>;
> + iommus = <&iommu M4U_PORT_DISP_RDMA1>;
> + mediatek,larb = <&larb0>;
> + mediatek,rdma_fifo_size = <2048>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
> + };
> +
> + color0: color@1400e000 {
> + compatible = "mediatek,mt8183-disp-color",
> + "mediatek,mt8173-disp-color";
> + reg = <0 0x1400e000 0 0x1000>;
> + interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_LOW>;
> + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
> + clocks = <&mmsys CLK_MM_DISP_COLOR0>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
> + };
> +
> + ccorr0: ccorr@1400f000 {
> + compatible = "mediatek,mt8183-disp-ccorr";
> + reg = <0 0x1400f000 0 0x1000>;
> + interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
> + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
> + clocks = <&mmsys CLK_MM_DISP_CCORR0>;
> + };
> +
> + aal0: aal@14010000 {
> + compatible = "mediatek,mt8183-disp-aal",
> + "mediatek,mt8173-disp-aal";
> + reg = <0 0x14010000 0 0x1000>;
> + interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_LOW>;
> + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
> + clocks = <&mmsys CLK_MM_DISP_AAL0>;
> + };
> +
> + gamma0: gamma@14011000 {
> + compatible = "mediatek,mt8183-disp-gamma",
> + "mediatek,mt8173-disp-gamma";
> + reg = <0 0x14011000 0 0x1000>;
> + interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_LOW>;
> + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
> + clocks = <&mmsys CLK_MM_DISP_GAMMA0>;
> + };
> +
> + dither0: dither@14012000 {
> + compatible = "mediatek,mt8183-disp-dither";
> + reg = <0 0x14012000 0 0x1000>;
> + interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_LOW>;
> + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
> + clocks = <&mmsys CLK_MM_DISP_DITHER0>;
> + };
> +
> dsi0: dsi@14014000 {
> compatible = "mediatek,mt8183-dsi";
> reg = <0 0x14014000 0 0x1000>;
> @@ -978,6 +1085,13 @@ dsi0: dsi@14014000 {
> phy-names = "dphy";
> };
>
> + mutex: mutex@14016000 {
> + compatible = "mediatek,mt8183-disp-mutex";
> + reg = <0 0x14016000 0 0x1000>;
> + interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_LOW>;
> + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
> + };
> +
> larb0: larb@14017000 {
> compatible = "mediatek,mt8183-smi-larb";
> reg = <0 0x14017000 0 0x1000>;
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
next prev parent reply other threads:[~2020-12-10 7:09 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-27 10:49 [PATCH 0/3] arm64: dts: mediatek: Add dsi and display support for MT8183 based boards Enric Balletbo i Serra
2020-11-27 10:49 ` [PATCH 1/3] arm64: dts: mt8183: Add dsi node Enric Balletbo i Serra
2020-11-27 10:49 ` [PATCH 2/3] arm64: dts: mt8183: Add iommu and larb nodes Enric Balletbo i Serra
2020-11-27 10:49 ` [PATCH 3/3] arm64: dts: mt8183: Add display nodes for MT8183 Enric Balletbo i Serra
2020-12-10 7:01 ` CK Hu [this message]
2020-11-27 11:23 ` [PATCH 0/3] arm64: dts: mediatek: Add dsi and display support for MT8183 based boards Matthias Brugger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1607583669.2269.2.camel@mtksdaap41 \
--to=ck.hu@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=enric.balletbo@collabora.com \
--cc=kernel@collabora.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).