[PATCH v2] Bluetooth: btusb: Add USB HW IDs for MT7920/MT7925

[PATCH v2] Bluetooth: btusb: Add USB HW IDs for MT7920/MT7925

[Jiande Lu]

Add HW IDs for wireless module. These HW IDs are extracted from
Windows driver inf file and the test for card bring up successful.
MT7920 HW IDs test with below patch.
https://patchwork.kernel.org/project/bluetooth/
patch/20240930081257.23975-1-chris.lu@mediatek.com/

Patch has been tested successfully and controller is recognized
devices pair successfully.

MT7920 module bring up message as below.
Bluetooth: Core ver 2.22
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: hci0: HW/SW Version: 0x008a008a, Build Time: 20240930111457
Bluetooth: hci0: Device setup in 143004 usecs
Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection
command is advertised, but not supported.
Bluetooth: hci0: AOSP extensions version v1.00
Bluetooth: hci0: AOSP quality report is supported
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: MGMT ver 1.22
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11

MT7925 module bring up message as below.
Bluetooth: Core ver 2.22
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: hci0: HW/SW Version: 0x00000000, Build Time: 20240816133202
Bluetooth: hci0: Device setup in 286558 usecs
Bluetooth: hci0: HCI Enhanced Setup Synchronous
Connection command is advertised, but not supported.
Bluetooth: hci0: AOSP extensions version v1.00
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: MGMT ver 1.22
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11

Signed-off-by: Jiande Lu <jiande.lu@mediatek.com>
---
v2: Rebase and add MT7920/MT7925 module bring up message
---
---
 drivers/bluetooth/btusb.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 080d68004a08..f3566ee2a220 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -569,6 +569,16 @@ static const struct usb_device_id quirks_table[] = {
 	{ USB_DEVICE(0x043e, 0x3109), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
 
+	/* Additional MediaTek MT7920 Bluetooth devices */
+	{ USB_DEVICE(0x0489, 0xe134), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x13d3, 0x3620), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x13d3, 0x3621), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x13d3, 0x3622), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH },
+
 	/* Additional MediaTek MT7921 Bluetooth devices */
 	{ USB_DEVICE(0x0489, 0xe0c8), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
@@ -642,6 +652,8 @@ static const struct usb_device_id quirks_table[] = {
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x0489, 0xe11e), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0489, 0xe139), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x13d3, 0x3602), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x13d3, 0x3603), .driver_info = BTUSB_MEDIATEK |
-- 
2.45.2

Re: [PATCH v2] Bluetooth: btusb: Add USB HW IDs for MT7920/MT7925

[patchwork-bot+bluetooth]

Hello:

This patch was applied to bluetooth/bluetooth-next.git (master)
by Luiz Augusto von Dentz <luiz.von.dentz@intel.com>:

On Mon, 30 Sep 2024 18:47:50 +0800 you wrote:
> Add HW IDs for wireless module. These HW IDs are extracted from
> Windows driver inf file and the test for card bring up successful.
> MT7920 HW IDs test with below patch.
> https://patchwork.kernel.org/project/bluetooth/
> patch/20240930081257.23975-1-chris.lu@mediatek.com/
> 
> Patch has been tested successfully and controller is recognized
> devices pair successfully.
> 
> [...]

Here is the summary with links:
  - [v2] Bluetooth: btusb: Add USB HW IDs for MT7920/MT7925
    https://git.kernel.org/bluetooth/bluetooth-next/c/af0163688ab3

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html