Re: [PATCH v5 6/7] dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Document MT6735 pin controller

[AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>]

Il 18/11/22 12:30, Yassine Oudjana ha scritto:
> From: Yassine Oudjana <y.oudjana@protonmail.com>
> 
> Add bindings for the pin controller found on MediaTek MT6735 and
> MT6735M SoCs, including describing a method to manually specify
> a pin and function in the pinmux property making defining bindings
> for each pin/function combination unnecessary. The pin controllers
> on those SoCs are generally identical, with the only difference
> being the lack of MSDC2 pins (198-203) on MT6735M.
> 
> Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
>   .../pinctrl/mediatek,mt6779-pinctrl.yaml      | 55 ++++++++++++++++++-
>   MAINTAINERS                                   |  6 ++
>   2 files changed, 60 insertions(+), 1 deletion(-)
> 

..snip..

> @@ -352,18 +391,32 @@ examples:
>               };
>   
>               /* GPIO0 set as multifunction GPIO0 */
> -            gpio-pins {
> +            gpio0-pins {
>                   pins {
>                       pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
>                   };
>               };
>   
> +            /* GPIO1 set to function 0 (GPIO) */
> +            gpio1-pins {
> +                pins {
> +                    pinmux = <(MTK_PIN_NO(1) | 0)>;

Please follow the same format that you can find in all of the
mtXXXX-pinfunc.h.

What you wrote here (MTK_PIN_NO(x) | func) is defined in there for the purpose
of providing a definition name that actually means something (for both readability
and documentation purposes).

This means that your GPIO1 set to function 0 (gpio) should be

			pinmux = <PINMUX_GPIO1__FUNC_GPIO1>;

> +                };
> +            };
> +
>               /* GPIO52 set as multifunction SDA0 */
>               i2c0-pins {
>                   pins {
>                     pinmux = <PINMUX_GPIO52__FUNC_SDA0>;
>                   };
>               };
> +
> +            /* GPIO62 set to function 1 (primary function) */
> +            i2c1-pins {
> +                pins {
> +                    pinmux = <(MTK_PIN_NO(62) | 1)>;

pinmux = <PINMUX_GPIO62__FUNC_SDA1>; (is it sda1??)

This means that you should as well add a mediatek,mt6735-pinfunc.h binding...

Regards,
Angelo