From: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: Yong Wu <yong.wu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Catalin Marinas <catalin.marinas-5wv7dgnIgG8@public.gmane.org>,
Will Deacon <will.deacon-5wv7dgnIgG8@public.gmane.org>,
yingjoe.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org,
Thierry Reding <treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Sasha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
arnd-r2nGTMty4D4@public.gmane.org,
Tomasz Figa <tfiga-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Matthias Brugger
<matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
pebolle-IWqWACnzNjzz+pZb47iToQ@public.gmane.org,
srv_heupstream-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org,
Daniel Kurtz <djkurtz-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>,
p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
Lucas Stach <l.stach-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Subject: Re: [PATCH v6 2/5] dt-bindings: mediatek: Add smi dts binding
Date: Tue, 8 Dec 2015 21:35:03 -0600 [thread overview]
Message-ID: <20151209033503.GA14549@rob-hp-laptop> (raw)
In-Reply-To: <1449568153-15643-3-git-send-email-yong.wu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
On Tue, Dec 08, 2015 at 05:49:10PM +0800, Yong Wu wrote:
> This patch add smi binding document.
>
> Signed-off-by: Yong Wu <yong.wu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> ---
> .../memory-controllers/mediatek,smi-common.txt | 24 +++++++++++++++++++++
> .../memory-controllers/mediatek,smi-larb.txt | 25 ++++++++++++++++++++++
> 2 files changed, 49 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
> create mode 100644 Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
>
> diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
> new file mode 100644
> index 0000000..06a83ce
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
> @@ -0,0 +1,24 @@
> +SMI (Smart Multimedia Interface) Common
> +
> +The hardware block diagram please check bindings/iommu/mediatek,iommu.txt
> +
> +Required properties:
> +- compatible : must be "mediatek,mt8173-smi-common"
> +- reg : the register and size of the SMI block.
> +- power-domains : a phandle to the power domain of this local arbiter.
> +- clocks : Must contain an entry for each entry in clock-names.
> +- clock-names : must contain 2 entries, as follows:
> + - "apb" : Advanced Peripheral Bus clock, It's the clock for setting
> + the register.
> + - "smi" : It's the clock for transfer data and command.
> + They may be the same if both source clocks are the same.
> +
> +Example:
> + smi_common: smi@14022000 {
> + compatible = "mediatek,mt8173-smi-common";
> + reg = <0 0x14022000 0 0x1000>;
> + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
> + clocks = <&mmsys CLK_MM_SMI_COMMON>,
> + <&mmsys CLK_MM_SMI_COMMON>;
> + clock-names = "apb", "smi";
> + };
> diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
> new file mode 100644
> index 0000000..55ff3b7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
> @@ -0,0 +1,25 @@
> +SMI (Smart Multimedia Interface) Local Arbiter
> +
> +The hardware block diagram please check bindings/iommu/mediatek,iommu.txt
> +
> +Required properties:
> +- compatible : must be "mediatek,mt8173-smi-larb"
> +- reg : the register and size of this local arbiter.
> +- mediatek,smi : a phandle to the smi_common node.
> +- power-domains : a phandle to the power domain of this local arbiter.
> +- clocks : Must contain an entry for each entry in clock-names.
> +- clock-names: must contain 2 entries, as follows:
> + - "apb" : Advanced Peripheral Bus clock, It's the clock for setting
> + the register.
> + - "smi" : It's the clock for transfer data and command.
> +
> +Example:
> + larb1: larb@16010000 {
> + compatible = "mediatek,mt8173-smi-larb";
> + reg = <0 0x16010000 0 0x1000>;
> + mediatek,smi = <&smi_common>;
> + power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>;
> + clocks = <&vdecsys CLK_VDEC_CKEN>,
> + <&vdecsys CLK_VDEC_LARB_CKEN>;
> + clock-names = "apb", "smi";
> + };
> --
> 1.8.1.1.dirty
>
next prev parent reply other threads:[~2015-12-09 3:35 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-08 9:49 [PATCH v6 0/5] MT8173 IOMMU SUPPORT Yong Wu
2015-12-08 9:49 ` [PATCH v6 1/5] dt-bindings: iommu: Add binding for mediatek IOMMU Yong Wu
[not found] ` <1449568153-15643-2-git-send-email-yong.wu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2015-12-09 3:33 ` Rob Herring
2015-12-09 6:55 ` Yong Wu
2015-12-08 9:49 ` [PATCH v6 2/5] dt-bindings: mediatek: Add smi dts binding Yong Wu
[not found] ` <1449568153-15643-3-git-send-email-yong.wu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2015-12-09 3:35 ` Rob Herring [this message]
2015-12-08 9:49 ` [PATCH v6 3/5] memory: mediatek: Add SMI driver Yong Wu
[not found] ` <1449568153-15643-4-git-send-email-yong.wu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2015-12-11 7:22 ` Yong Wu
2015-12-14 18:18 ` Matthias Brugger
[not found] ` <24171857.0SPpBlzoZl-FL1YVkE3Js+HtQ08XqlRiA@public.gmane.org>
2015-12-15 2:38 ` Yong Wu
2015-12-15 5:45 ` Daniel Kurtz
[not found] ` <CAGS+omDTt646fH3p7kA+EHkR93xGX0APu1sOEjY7MCzQfpO8DA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-12-16 6:00 ` Yong Wu
2015-12-08 9:49 ` [PATCH v6 4/5] iommu/mediatek: Add mt8173 IOMMU driver Yong Wu
2015-12-08 10:32 ` kbuild test robot
[not found] ` <1449568153-15643-5-git-send-email-yong.wu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2015-12-14 14:16 ` Joerg Roedel
[not found] ` <20151214141656.GG18805-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
2015-12-15 3:28 ` Yong Wu
2015-12-15 12:37 ` Robin Murphy
[not found] ` <5670098E.40601-5wv7dgnIgG8@public.gmane.org>
2015-12-16 5:59 ` Yong Wu
2015-12-16 12:48 ` Robin Murphy
[not found] ` <56715D8D.3050102-5wv7dgnIgG8@public.gmane.org>
2015-12-17 3:12 ` Yong Wu
2015-12-16 15:15 ` Joerg Roedel
2015-12-14 18:19 ` Matthias Brugger
[not found] ` <566F0821.4080507-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-12-15 2:40 ` Yong Wu
[not found] ` <1449568153-15643-1-git-send-email-yong.wu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2015-12-08 9:49 ` [PATCH v6 5/5] dts: mt8173: Add iommu/smi nodes for mt8173 Yong Wu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151209033503.GA14549@rob-hp-laptop \
--to=robh-dgejt+ai2ygdnm+yrofe0a@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=catalin.marinas-5wv7dgnIgG8@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=djkurtz-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
--cc=iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=l.stach-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=pebolle-IWqWACnzNjzz+pZb47iToQ@public.gmane.org \
--cc=srv_heupstream-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org \
--cc=tfiga-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
--cc=treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
--cc=will.deacon-5wv7dgnIgG8@public.gmane.org \
--cc=yingjoe.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org \
--cc=yong.wu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox