Linux-mediatek Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Martin Blumenstingl <martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
To: linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: d-gerlach-l0cyMroinI0@public.gmane.org,
	Martin Blumenstingl
	<martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>,
	gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org,
	stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org,
	chunfeng.yun-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org,
	linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	j-keerthy-l0cyMroinI0@public.gmane.org,
	matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
	linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	kishon-l0cyMroinI0@public.gmane.org,
	rogerq-l0cyMroinI0@public.gmane.org
Subject: [RFC usb-next v2 2/2] usb: core: use phy_exit during suspend if wake up is not supported
Date: Sat, 24 Mar 2018 15:21:21 +0100	[thread overview]
Message-ID: <20180324142121.8618-3-martin.blumenstingl@googlemail.com> (raw)
In-Reply-To: <20180324142121.8618-1-martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>

If the USB controller can wake up the system (which is the case for
example with the Mediatek USB3 IP) then we must not call phy_exit during
suspend to ensure that the USB controller doesn't have to re-enumerate
the devices during resume.
However, if the USB controller cannot wake up the system (which is the
case for example on various TI platforms using a dwc3 controller) then
we must call phy_exit during suspend. Otherwise the PHY driver keeps the
clocks enabled, which prevents the system from entering the suspend
state.

Solve this by introducing two new functions in the PHY wrapper which are
dedicated to the suspend and resume handling.
If the controller can wake up the system the new usb_phy_roothub_suspend
function will simply call usb_phy_roothub_power_off. However, if wake up
is not supported by the controller it will also call
usb_phy_roothub_exit.
The also new usb_phy_roothub_resume function takes care of calling
usb_phy_roothub_init (if the controller can't wake up the system) in
addition to usb_phy_roothub_power_on.

Fixes: 07dbff0ddbd86c ("usb: core: add a wrapper for the USB PHYs on the HCD")
Fixes: 178a0bce05cbc1 ("usb: core: hcd: integrate the PHY wrapper into the HCD core")
Reported-by: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
Suggested-by: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
Suggested-by: Chunfeng Yun <chunfeng.yun-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
---
 drivers/usb/core/hcd.c |  8 +++++---
 drivers/usb/core/phy.c | 37 +++++++++++++++++++++++++++++++++++++
 drivers/usb/core/phy.h |  5 +++++
 3 files changed, 47 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 15b0418e3b6a..78bae4ecd68b 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -2262,7 +2262,8 @@ int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg)
 		hcd->state = HC_STATE_SUSPENDED;
 
 		if (!PMSG_IS_AUTO(msg))
-			usb_phy_roothub_power_off(hcd->phy_roothub);
+			usb_phy_roothub_suspend(hcd->self.sysdev,
+						hcd->phy_roothub);
 
 		/* Did we race with a root-hub wakeup event? */
 		if (rhdev->do_remote_wakeup) {
@@ -2302,7 +2303,8 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
 	}
 
 	if (!PMSG_IS_AUTO(msg)) {
-		status = usb_phy_roothub_power_on(hcd->phy_roothub);
+		status = usb_phy_roothub_resume(hcd->self.sysdev,
+						hcd->phy_roothub);
 		if (status)
 			return status;
 	}
@@ -2344,7 +2346,7 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
 		}
 	} else {
 		hcd->state = old_state;
-		usb_phy_roothub_power_off(hcd->phy_roothub);
+		usb_phy_roothub_suspend(hcd->self.sysdev, hcd->phy_roothub);
 		dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
 				"resume", status);
 		if (status != -ESHUTDOWN)
diff --git a/drivers/usb/core/phy.c b/drivers/usb/core/phy.c
index d1861c5a74de..e794cbee97e9 100644
--- a/drivers/usb/core/phy.c
+++ b/drivers/usb/core/phy.c
@@ -155,3 +155,40 @@ void usb_phy_roothub_power_off(struct usb_phy_roothub *phy_roothub)
 		phy_power_off(roothub_entry->phy);
 }
 EXPORT_SYMBOL_GPL(usb_phy_roothub_power_off);
+
+int usb_phy_roothub_suspend(struct device *controller_dev,
+			    struct usb_phy_roothub *phy_roothub)
+{
+	usb_phy_roothub_power_off(phy_roothub);
+
+	/* keep the PHYs initialized so the device can wake up the system */
+	if (device_may_wakeup(controller_dev))
+		return 0;
+
+	return usb_phy_roothub_exit(phy_roothub);
+}
+EXPORT_SYMBOL_GPL(usb_phy_roothub_suspend);
+
+int usb_phy_roothub_resume(struct device *controller_dev,
+			   struct usb_phy_roothub *phy_roothub)
+{
+	int err;
+
+	/* if the device can't wake up the system _exit was called */
+	if (device_may_wakeup(controller_dev)) {
+		err = usb_phy_roothub_init(phy_roothub);
+		if (err)
+			return err;
+	}
+
+	err = usb_phy_roothub_power_on(phy_roothub);
+	if (err) {
+		if (device_may_wakeup(controller_dev))
+			usb_phy_roothub_exit(phy_roothub);
+
+		return err;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_phy_roothub_resume);
diff --git a/drivers/usb/core/phy.h b/drivers/usb/core/phy.h
index eb31253201ad..605555901d44 100644
--- a/drivers/usb/core/phy.h
+++ b/drivers/usb/core/phy.h
@@ -7,3 +7,8 @@ int usb_phy_roothub_exit(struct usb_phy_roothub *phy_roothub);
 
 int usb_phy_roothub_power_on(struct usb_phy_roothub *phy_roothub);
 void usb_phy_roothub_power_off(struct usb_phy_roothub *phy_roothub);
+
+int usb_phy_roothub_suspend(struct device *controller_dev,
+			    struct usb_phy_roothub *phy_roothub);
+int usb_phy_roothub_resume(struct device *controller_dev,
+			   struct usb_phy_roothub *phy_roothub);
-- 
2.16.2

  parent reply	other threads:[~2018-03-24 14:21 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-24 14:21 [RFC usb-next v2 0/2] fix HCD PHY suspend handling Martin Blumenstingl
     [not found] ` <20180324142121.8618-1-martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
2018-03-24 14:21   ` [RFC usb-next v2 1/2] usb: core: split usb_phy_roothub_{init,alloc} Martin Blumenstingl
     [not found]     ` <20180324142121.8618-2-martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
2018-03-26  3:37       ` Chunfeng Yun
2018-03-26 20:31         ` [RFC usb-next v2 1/2] usb: core: split usb_phy_roothub_{init, alloc} Martin Blumenstingl
     [not found]           ` <CAFBinCBaY6io5kye2inbjKvECBZY9bpuiftYhVS9i=Ro8AxHXg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-03-27  0:50             ` [RFC usb-next v2 1/2] usb: core: split usb_phy_roothub_{init,alloc} Chunfeng Yun
2018-03-26  9:57       ` Roger Quadros
2018-03-24 14:21   ` Martin Blumenstingl [this message]
     [not found]     ` <20180324142121.8618-3-martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
2018-03-26  3:21       ` [RFC usb-next v2 2/2] usb: core: use phy_exit during suspend if wake up is not supported Chunfeng Yun
2018-03-26  9:53       ` Roger Quadros

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180324142121.8618-3-martin.blumenstingl@googlemail.com \
    --to=martin.blumenstingl-gm/ye1e23mwn+bqq9rbeug@public.gmane.org \
    --cc=chunfeng.yun-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org \
    --cc=d-gerlach-l0cyMroinI0@public.gmane.org \
    --cc=gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org \
    --cc=j-keerthy-l0cyMroinI0@public.gmane.org \
    --cc=kishon-l0cyMroinI0@public.gmane.org \
    --cc=linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=rogerq-l0cyMroinI0@public.gmane.org \
    --cc=stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox