Re: mt76x0 bug report

[Lorenzo Bianconi <lorenzo.bianconi-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>]

> Actions like that have caused great problems in the past, as the
> kernel won't allow channel control of a monitor interface at all when
> there is a managed interface on the same phy (afaik).
> 
> But just for fun and codepath testing here are two test scenarios:
> 
> Test 1: "iwconfig t2u mode monitor"
> Sees nothing on any channel, no packets reported
> 
> Test 2(requested test): "iw phy phy11 interface add t2uhmon type monitor"
> Sees nothing on any channel, no packets reported.
> Despite having a monitor and managed interface on the same phy,
> iwconfig is reporting that the channel is changing as requested.  So
> perhaps my above "afaik" comment is partially outdated.
> 
> For both tests the interface was not used to connect to any ap prior
> to or during testing.
> 

Could you please try following patch?
Regards,

Lorenzo

--- a/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c
@@ -756,11 +756,10 @@ __mt76x0_phy_set_channel(struct mt76x0_dev *dev,
 
 	/* Vendor driver don't do it */
 	/* mt76x0_phy_set_tx_power(dev, channel, rf_bw_band); */
+	mt76x0_vco_cal(dev, channel);
 
 	if (scan)
-		mt76x0_vco_cal(dev, channel);