[PATCH] usb/mtu3: power down device ip at setup

["Hsin-Yi, Wang" <hsinyi@chromium.org>]

Originally, when dr_mode is USB_DR_MODE_HOST, it didn't power down device ip,
so host ip sleep will fail at ssusb_host_disable.

Power down device ip at ssusb_host_setup.

Signed-off-by: Hsin-Yi, Wang <hsinyi@chromium.org>
---
 drivers/usb/mtu3/mtu3_host.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/usb/mtu3/mtu3_host.c b/drivers/usb/mtu3/mtu3_host.c
index c871b94f3e6f..d17cf43305db 100644
--- a/drivers/usb/mtu3/mtu3_host.c
+++ b/drivers/usb/mtu3/mtu3_host.c
@@ -192,9 +192,17 @@ int ssusb_host_disable(struct ssusb_mtk *ssusb, bool suspend)
 static void ssusb_host_setup(struct ssusb_mtk *ssusb)
 {
 	struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
+	void __iomem *ibase = ssusb->ippc_base;
 
 	host_ports_num_get(ssusb);
 
+	/*
+	 * device ip is default power-on in fact
+	 * power down device ip, otherwise ip-sleep will fail
+	 */
+	if (ssusb->dr_mode == USB_DR_MODE_HOST)
+		mtu3_setbits(ibase, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN);
+
 	/*
 	 * power on host and power on/enable all ports
 	 * if support OTG, gadget driver will switch port0 to device mode
-- 
2.18.1