From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?UTF-8?q?Ren=C3=A9=20van=20Dorst?= Subject: [PATCH net-next v3 0/3] net: dsa: mt7530: Convert to PHYLINK and add support for port 5 Date: Mon, 2 Sep 2019 15:02:23 +0200 Message-ID: <20190902130226.26845-1-opensource@vdorst.com> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Return-path: Sender: netdev-owner@vger.kernel.org To: Sean Wang , Andrew Lunn , Vivien Didelot , Florian Fainelli , "David S . Miller" , Matthias Brugger Cc: netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-mediatek@lists.infradead.org, Russell King , John Crispin , linux-mips@vger.kernel.org, Frank Wunderlich , =?UTF-8?q?Ren=C3=A9=20van=20Dorst?= List-Id: linux-mediatek@lists.infradead.org 1. net: dsa: mt7530: Convert to PHYLINK API This patch converts mt7530 to PHYLINK API. 2. dt-bindings: net: dsa: mt7530: Add support for port 5 3. net: dsa: mt7530: Add support for port 5 These 2 patches adding support for port 5 of the switch. v2->v3: * Removed 'status = "okay"' lines in patch #2 * Change a port 5 setup message in a debug message in patch #3 * Added ack-by and tested-by tags v1->v2: * Mostly phylink improvements after review. rfc -> v1: * Mostly phylink improvements after review. * Drop phy isolation patches. Adds no value for now. René van Dorst (3): net: dsa: mt7530: Convert to PHYLINK API dt-bindings: net: dsa: mt7530: Add support for port 5 net: dsa: mt7530: Add support for port 5 .../devicetree/bindings/net/dsa/mt7530.txt | 214 ++++++++++ drivers/net/dsa/mt7530.c | 371 +++++++++++++++--- drivers/net/dsa/mt7530.h | 61 ++- 3 files changed, 573 insertions(+), 73 deletions(-) -- 2.20.1