From: fengping.yu <fengping.yu@mediatek.com>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Marco Felsch <m.felsch@pengutronix.de>,
Matthias Brugger <matthias.bgg@gmail.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-mediatek@lists.infradead.org, linux-input@vger.kernel.org,
"fengping.yu" <fengping.yu@mediatek.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH V3 2/2] drivers: input: keyboard: add mtk keypad driver
Date: Tue, 14 Jan 2020 20:27:41 +0800 [thread overview]
Message-ID: <20200114122738.103344-3-fengping.yu@mediatek.com> (raw)
In-Reply-To: <20200114122738.103344-1-fengping.yu@mediatek.com>
Signed-off-by: fengping.yu <fengping.yu@mediatek.com>
Add matrix keypad driver for MTK SoC.
---
arch/arm64/configs/defconfig | 1 +
drivers/input/keyboard/Kconfig | 8 +
drivers/input/keyboard/Makefile | 1 +
drivers/input/keyboard/mtk-kpd.c | 280 +++++++++++++++++++++++++++++++
4 files changed, 290 insertions(+)
create mode 100644 drivers/input/keyboard/mtk-kpd.c
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 8e05c39eab08..62bed77ec127 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -315,6 +315,7 @@ CONFIG_KEYBOARD_ADC=m
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_SNVS_PWRKEY=m
CONFIG_KEYBOARD_CROS_EC=y
+CONFIG_KEYBOARD_MTK=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
CONFIG_INPUT_MISC=y
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 8911bc2ec42a..01747a97536b 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -775,4 +775,12 @@ config KEYBOARD_MTK_PMIC
To compile this driver as a module, choose M here: the
module will be called pmic-keys.
+config KEYBOARD_MTK
+ tristate "MediaTek Keypad Support"
+ help
+ Say Y here if you want to use the keypad.
+ If unuse, say N.
+ To compile this driver as a module, choose M here: the
+ module will be called mtk-kpd.
+
endif
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 9510325c0c5d..daa654bcce6e 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -41,6 +41,7 @@ obj-$(CONFIG_KEYBOARD_MATRIX) += matrix_keypad.o
obj-$(CONFIG_KEYBOARD_MAX7359) += max7359_keypad.o
obj-$(CONFIG_KEYBOARD_MCS) += mcs_touchkey.o
obj-$(CONFIG_KEYBOARD_MPR121) += mpr121_touchkey.o
+obj-$(CONFIG_KEYBOARD_MTK) += mtk-kpd.o
obj-$(CONFIG_KEYBOARD_MTK_PMIC) += mtk-pmic-keys.o
obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o
obj-$(CONFIG_KEYBOARD_NOMADIK) += nomadik-ske-keypad.o
diff --git a/drivers/input/keyboard/mtk-kpd.c b/drivers/input/keyboard/mtk-kpd.c
new file mode 100644
index 000000000000..e36461c9dd89
--- /dev/null
+++ b/drivers/input/keyboard/mtk-kpd.c
@@ -0,0 +1,280 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 MediaTek Inc.
+ * Author Terry Chang <terry.chang@mediatek.com>
+ */
+#include <linux/clk.h>
+#include <linux/fs.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define KPD_NAME "mtk-kpd"
+
+#define KP_STA 0x0000
+#define KP_MEM1 0x0004
+#define KP_MEM2 0x0008
+#define KP_MEM3 0x000c
+#define KP_MEM4 0x0010
+#define KP_MEM5 0x0014
+#define KP_DEBOUNCE 0x0018
+#define KP_SEL 0x0020
+#define KP_EN 0x0024
+
+#define KP_COL0_SEL BIT(10)
+#define KP_COL1_SEL BIT(11)
+#define KP_COL2_SEL BIT(12)
+
+#define KPD_DEBOUNCE_MASK GENMASK_ULL(13, 0)
+
+#define KPD_NUM_MEMS 5
+#define KPD_MEM5_BITS 8
+#define KPD_NUM_KEYS 72 /* 4 * 16 + KPD_MEM5_BITS */
+
+struct mtk_keypad {
+ struct input_dev *input_dev;
+ struct clk *clk;
+ void __iomem *base;
+ unsigned int irqnr;
+ bool wakeup;
+ u32 key_debounce;
+ u32 n_rows;
+ u32 n_cols;
+ u32 keymap_state[KPD_NUM_MEMS];
+};
+
+static void kpd_get_keymap_state(void __iomem *kp_base, u32 state[])
+{
+ memset_io(state, 0xff, KPD_NUM_MEMS);
+ memcpy_fromio(state, kp_base, KPD_NUM_MEMS);
+}
+
+static irqreturn_t kpd_irq_handler(int irq, void *dev_id)
+{
+ /* use _nosync to avoid deadlock */
+ struct mtk_keypad *keypad = dev_id;
+ unsigned short *keycode = keypad->input_dev->keycode;
+ u32 new_state[KPD_NUM_MEMS], mask;
+ unsigned long change = 0;
+ int bit_nr;
+ int pressed;
+ u32 row_shift = get_count_order(keypad->n_cols);
+ unsigned short code;
+ int i;
+
+ disable_irq_nosync(keypad->irqnr);
+
+ kpd_get_keymap_state(keypad->base, new_state);
+
+ for (i = 0; i < KPD_NUM_MEMS; i++) {
+ change = new_state[i] ^ keypad->keymap_state[i];
+ if (!change)
+ continue;
+
+ for_each_set_bit(bit_nr, &change, 32) {
+ mask = 1 << bit_nr;
+ pressed = (new_state[i] & mask) == 0U;
+ dev_dbg(&keypad->input_dev->dev,
+ "%s", pressed ? "pressed" : "released");
+
+ code = keycode[MATRIX_SCAN_CODE(i, bit_nr, row_shift)];
+
+ input_report_key(keypad->input_dev, code, pressed);
+ input_sync(keypad->input_dev);
+
+ dev_dbg(&keypad->input_dev->dev,
+ "report Linux keycode = %d\n", code);
+ }
+ }
+
+ memcpy(keypad->keymap_state, new_state, sizeof(new_state));
+
+ enable_irq(keypad->irqnr);
+
+ return IRQ_HANDLED;
+}
+
+static int kpd_get_dts_info(struct mtk_keypad *keypad)
+{
+ int ret;
+ struct device *dev = keypad->input_dev->dev.parent;
+ struct device_node *node = dev->of_node;
+
+ ret = matrix_keypad_parse_properties(dev, &keypad->n_rows,
+ &keypad->n_cols);
+
+ if (ret) {
+ dev_err(dev, "failed to parse keypad params.\n");
+ return ret;
+ }
+
+ ret = of_property_read_u32(node, "mediatek,debounce-us",
+ &keypad->key_debounce);
+ if (ret) {
+ pr_debug("read mediatek,debounce-us error.\n");
+ return ret;
+ }
+
+ keypad->wakeup = of_property_read_bool(node, "wakeup-source");
+
+ dev_dbg(dev, "n_row=%d n_col=%d debounce=%d.\n",
+ keypad->n_rows, keypad->n_cols,
+ keypad->key_debounce);
+
+ return 0;
+}
+
+static int kpd_gpio_init(struct device *dev)
+{
+ struct pinctrl *keypad_pinctrl;
+ struct pinctrl_state *kpd_default;
+
+ keypad_pinctrl = devm_pinctrl_get(dev);
+ if (IS_ERR(keypad_pinctrl)) {
+ dev_err(dev, "Cannot find keypad_pinctrl!\n");
+
+ return PTR_ERR(keypad_pinctrl);
+ }
+
+ kpd_default = pinctrl_lookup_state(keypad_pinctrl, "default");
+ if (IS_ERR(kpd_default)) {
+ dev_err(dev, "Cannot find ecall_state!\n");
+
+ return PTR_ERR(kpd_default);
+ }
+
+ return pinctrl_select_state(keypad_pinctrl, kpd_default);
+}
+
+static int kpd_pdrv_probe(struct platform_device *pdev)
+{
+ struct mtk_keypad *keypad;
+ struct resource *res;
+ int err;
+
+ if (!pdev->dev.of_node) {
+ dev_err(&pdev->dev, "No device tree data present.\n");
+ return -EINVAL;
+ }
+
+ keypad = devm_kzalloc(&pdev->dev, sizeof(*keypad), GFP_KERNEL);
+ if (!keypad)
+ return -ENOMEM;
+
+ memset(keypad->keymap_state, 0xff, sizeof(keypad->keymap_state));
+
+ keypad->input_dev = devm_input_allocate_device(&pdev->dev);
+ if (!keypad->input_dev) {
+ dev_err(&pdev->dev, "input allocate device fail.\n");
+ return -ENOMEM;
+ }
+
+ keypad->input_dev->name = KPD_NAME;
+ keypad->input_dev->id.bustype = BUS_HOST;
+ keypad->input_dev->dev.parent = &pdev->dev;
+
+ err = kpd_get_dts_info(keypad);
+ if (err) {
+ dev_err(&pdev->dev, "get dts info failed.\n");
+ return err;
+ }
+
+ err = matrix_keypad_build_keymap(NULL, NULL,
+ keypad->n_rows,
+ keypad->n_cols,
+ NULL,
+ keypad->input_dev);
+
+ if (err) {
+ dev_err(&pdev->dev, "build keymap failed.\n");
+ return err;
+ }
+
+ input_set_drvdata(keypad->input_dev, keypad);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "get IO memory resource failed.\n");
+ return -ENODEV;
+ }
+
+ keypad->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(keypad->base)) {
+ dev_err(&pdev->dev, "KP iomap failed\n");
+ return PTR_ERR(keypad->base);
+ }
+
+ writew((keypad->key_debounce * 32 / 1000 & KPD_DEBOUNCE_MASK),
+ keypad->base + KP_DEBOUNCE);
+
+ keypad->clk = devm_clk_get(&pdev->dev, "kpd");
+ if (IS_ERR(keypad->clk)) {
+ dev_err(&pdev->dev, "get kpd-clk fail.\n");
+ return PTR_ERR(keypad->clk);
+ }
+
+ err = clk_prepare_enable(keypad->clk);
+ if (err) {
+ dev_err(&pdev->dev, "kpd-clk prepare enable failed.\n");
+ return err;
+ }
+
+ err = kpd_gpio_init(&pdev->dev);
+ if (err) {
+ dev_err(&pdev->dev, "gpio init failed\n");
+ return err;
+ }
+
+ keypad->irqnr = platform_get_irq(pdev, 0);
+ if (!keypad->irqnr) {
+ dev_err(&pdev->dev, "KP get irqnr failed\n");
+ return -EINVAL;
+ }
+
+ err = devm_request_irq(&pdev->dev, keypad->irqnr,
+ kpd_irq_handler, 0,
+ KPD_NAME, keypad);
+ if (err) {
+ dev_err(&pdev->dev, "register IRQ failed.\n");
+ return err;
+ }
+
+ err = input_register_device(keypad->input_dev);
+ if (err) {
+ dev_err(&pdev->dev, "register input device failed.\n");
+ return err;
+ }
+
+ device_init_wakeup(&pdev->dev, keypad->wakeup);
+
+ platform_set_drvdata(pdev, keypad);
+
+ return 0;
+}
+
+static const struct of_device_id kpd_of_match[] = {
+ {.compatible = "mediatek,kp"},
+ {}
+};
+
+static struct platform_driver kpd_pdrv = {
+ .probe = kpd_pdrv_probe,
+ .driver = {
+ .name = KPD_NAME,
+ .of_match_table = kpd_of_match,
+ },
+};
+
+module_platform_driver(kpd_pdrv);
+
+MODULE_AUTHOR("Mediatek Corporation");
+MODULE_DESCRIPTION("MTK Keypad (KPD) Driver");
+MODULE_LICENSE("GPL");
--
2.18.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
next prev parent reply other threads:[~2020-01-14 12:39 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-14 12:27 [PATCH V3] add mtk matrix keypad driver for keypad on MTK SoC fengping.yu
2020-01-14 12:27 ` [PATCH V3 1/2] dt-bindings: add matrix keypad documentation fengping.yu
2020-01-16 9:13 ` Yingjoe Chen
2020-01-14 12:27 ` fengping.yu [this message]
2020-01-14 16:36 ` [PATCH V3 2/2] drivers: input: keyboard: add mtk keypad driver Andy Shevchenko
2020-01-16 11:28 ` Yingjoe Chen
2020-01-22 6:24 ` Dmitry Torokhov
2020-02-18 15:14 ` Fabien Parent
2020-02-18 15:51 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200114122738.103344-3-fengping.yu@mediatek.com \
--to=fengping.yu@mediatek.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=m.felsch@pengutronix.de \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox