From: Stanley Chu <stanley.chu@mediatek.com>
To: <linux-scsi@vger.kernel.org>, <martin.petersen@oracle.com>,
<avri.altman@wdc.com>, <alim.akhtar@samsung.com>,
<jejb@linux.ibm.com>, <asutoshd@codeaurora.org>
Cc: bvanassche@acm.org, andy.teng@mediatek.com,
chun-hung.wu@mediatek.com, kuohong.wang@mediatek.com,
linux-kernel@vger.kernel.org, cang@codeaurora.org,
linux-mediatek@lists.infradead.org, peter.wang@mediatek.com,
matthias.bgg@gmail.com, Stanley Chu <stanley.chu@mediatek.com>,
linux-arm-kernel@lists.infradead.org, beanhuo@micron.com
Subject: [PATCH v3 5/5] scsi: ufs: Fix possible VCC power drain during runtime suspend
Date: Sun, 17 May 2020 01:46:15 +0800 [thread overview]
Message-ID: <20200516174615.15445-6-stanley.chu@mediatek.com> (raw)
In-Reply-To: <20200516174615.15445-1-stanley.chu@mediatek.com>
The commit "scsi: ufs: Fix WriteBooster flush during runtime
suspend" promises essential resource, i.e., for UFS devices doing
WriteBooster buffer flush and Auto BKOPs. However if device
finishes its job but not resumed for a very long time, system
will have unnecessary power drain because VCC is still supplied.
To fix this, a method to recheck the threshold of keeping VCC
supply is required. However, the threshold recheck needs to
re-activate the link because the decision depends on the device
status.
Introduce a delayed work to force runtime resume after a certain
delay during runtime suspend. This makes threshold recheck simpler
which will be done in the next runtime-suspend.
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
---
drivers/scsi/ufs/ufs.h | 1 +
drivers/scsi/ufs/ufshcd.c | 43 ++++++++++++++++++++++++++++++++++-----
drivers/scsi/ufs/ufshcd.h | 1 +
3 files changed, 40 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
index db07eedfed96..c70845d41449 100644
--- a/drivers/scsi/ufs/ufs.h
+++ b/drivers/scsi/ufs/ufs.h
@@ -574,6 +574,7 @@ struct ufs_dev_info {
u32 d_ext_ufs_feature_sup;
u8 b_wb_buffer_type;
u32 d_wb_alloc_units;
+ bool b_rpm_dev_flush_capable;
u8 b_presrv_uspc_en;
};
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index f4f2c7b5ab0a..a137553f9b41 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -94,6 +94,9 @@
/* default delay of autosuspend: 2000 ms */
#define RPM_AUTOSUSPEND_DELAY_MS 2000
+/* Default delay of RPM device flush delayed work */
+#define RPM_DEV_FLUSH_RECHECK_WORK_DELAY_MS 5000
+
/* Default value of wait time before gating device ref clock */
#define UFSHCD_REF_CLK_GATING_WAIT_US 0xFF /* microsecs */
@@ -5310,7 +5313,7 @@ static bool ufshcd_wb_presrv_usrspc_keep_vcc_on(struct ufs_hba *hba,
return false;
}
-static bool ufshcd_wb_keep_vcc_on(struct ufs_hba *hba)
+static bool ufshcd_wb_need_flush(struct ufs_hba *hba)
{
int ret;
u32 avail_buf;
@@ -5348,6 +5351,21 @@ static bool ufshcd_wb_keep_vcc_on(struct ufs_hba *hba)
return ufshcd_wb_presrv_usrspc_keep_vcc_on(hba, avail_buf);
}
+static void ufshcd_rpm_dev_flush_recheck_work(struct work_struct *work)
+{
+ struct ufs_hba *hba = container_of(to_delayed_work(work),
+ struct ufs_hba,
+ rpm_dev_flush_recheck_work);
+ /*
+ * To prevent unnecessary VCC power drain after device finishes
+ * WriteBooster buffer flush or Auto BKOPs, force runtime resume
+ * after a certain delay to recheck the threshold by next runtime
+ * supsend.
+ */
+ pm_runtime_get_sync(hba->dev);
+ pm_runtime_put_sync(hba->dev);
+}
+
/**
* ufshcd_exception_event_handler - handle exceptions raised by device
* @work: pointer to work data
@@ -8164,7 +8182,6 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
enum ufs_pm_level pm_lvl;
enum ufs_dev_pwr_mode req_dev_pwr_mode;
enum uic_link_state req_link_state;
- bool keep_curr_dev_pwr_mode = false;
hba->pm_op_in_progress = 1;
if (!ufshcd_is_shutdown_pm(pm_op)) {
@@ -8224,11 +8241,12 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
* Hibern8, keep device power mode as "active power mode"
* and VCC supply.
*/
- keep_curr_dev_pwr_mode = hba->auto_bkops_enabled ||
+ hba->dev_info.b_rpm_dev_flush_capable =
+ hba->auto_bkops_enabled ||
(((req_link_state == UIC_LINK_HIBERN8_STATE) ||
((req_link_state == UIC_LINK_ACTIVE_STATE) &&
ufshcd_is_auto_hibern8_enabled(hba))) &&
- ufshcd_wb_keep_vcc_on(hba));
+ ufshcd_wb_need_flush(hba));
}
if (req_dev_pwr_mode != hba->curr_dev_pwr_mode) {
@@ -8238,7 +8256,7 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
ufshcd_disable_auto_bkops(hba);
}
- if (!keep_curr_dev_pwr_mode) {
+ if (!hba->dev_info.b_rpm_dev_flush_capable) {
ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode);
if (ret)
goto enable_gating;
@@ -8295,9 +8313,16 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
if (hba->clk_scaling.is_allowed)
ufshcd_resume_clkscaling(hba);
hba->clk_gating.is_suspended = false;
+ hba->dev_info.b_rpm_dev_flush_capable = false;
ufshcd_release(hba);
out:
+ if (hba->dev_info.b_rpm_dev_flush_capable) {
+ schedule_delayed_work(&hba->rpm_dev_flush_recheck_work,
+ msecs_to_jiffies(RPM_DEV_FLUSH_RECHECK_WORK_DELAY_MS));
+ }
+
hba->pm_op_in_progress = 0;
+
if (ret)
ufshcd_update_reg_hist(&hba->ufs_stats.suspend_err, (u32)ret);
return ret;
@@ -8386,6 +8411,11 @@ static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
/* Enable Auto-Hibernate if configured */
ufshcd_auto_hibern8_enable(hba);
+ if (hba->dev_info.b_rpm_dev_flush_capable) {
+ hba->dev_info.b_rpm_dev_flush_capable = false;
+ cancel_delayed_work(&hba->rpm_dev_flush_recheck_work);
+ }
+
/* Schedule clock gating in case of no access to UFS device yet */
ufshcd_release(hba);
@@ -8859,6 +8889,9 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
UFS_SLEEP_PWR_MODE,
UIC_LINK_HIBERN8_STATE);
+ INIT_DELAYED_WORK(&hba->rpm_dev_flush_recheck_work,
+ ufshcd_rpm_dev_flush_recheck_work);
+
/* Set the default auto-hiberate idle timer value to 150 ms */
if (ufshcd_is_auto_hibern8_supported(hba) && !hba->ahit) {
hba->ahit = FIELD_PREP(UFSHCI_AHIBERN8_TIMER_MASK, 150) |
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 8db7a6101892..9acd437037e8 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -745,6 +745,7 @@ struct ufs_hba {
struct request_queue *bsg_queue;
bool wb_buf_flush_enabled;
bool wb_enabled;
+ struct delayed_work rpm_dev_flush_recheck_work;
};
/* Returns true if clocks can be gated. Otherwise false */
--
2.18.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
next prev parent reply other threads:[~2020-05-16 17:46 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-16 17:46 [PATCH v3 0/5] scsi: ufs: Fix WriteBooster and cleanup UFS driver Stanley Chu
2020-05-16 17:46 ` [PATCH v3 1/5] scsi: ufs: Remove unnecessary memset for dev_info Stanley Chu
2020-05-17 6:11 ` Avri Altman
2020-05-16 17:46 ` [PATCH v3 2/5] scsi: ufs: Allow WriteBooster on UFS 2.2 devices Stanley Chu
2020-05-17 6:12 ` Avri Altman
2020-05-16 17:46 ` [PATCH v3 3/5] scsi: ufs: Fix index of attributes query for WriteBooster feature Stanley Chu
2020-05-17 6:13 ` Avri Altman
2020-05-16 17:46 ` [PATCH v3 4/5] scsi: ufs: Fix WriteBooster flush during runtime suspend Stanley Chu
2020-05-16 17:46 ` Stanley Chu [this message]
2020-05-19 16:27 ` [PATCH v3 5/5] scsi: ufs: Fix possible VCC power drain " Asutosh Das (asd)
2020-05-20 7:23 ` Stanley Chu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200516174615.15445-6-stanley.chu@mediatek.com \
--to=stanley.chu@mediatek.com \
--cc=alim.akhtar@samsung.com \
--cc=andy.teng@mediatek.com \
--cc=asutoshd@codeaurora.org \
--cc=avri.altman@wdc.com \
--cc=beanhuo@micron.com \
--cc=bvanassche@acm.org \
--cc=cang@codeaurora.org \
--cc=chun-hung.wu@mediatek.com \
--cc=jejb@linux.ibm.com \
--cc=kuohong.wang@mediatek.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=matthias.bgg@gmail.com \
--cc=peter.wang@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox