Re: [PATCH net-next v2 7/7] arm64: dts: mt7622: add mt7531 dsa to bananapi-bpi-r64 board

From: Vladimir Oltean <olteanv@gmail.com>
To: Landen Chao <landen.chao@mediatek.com>
Cc: "mark.rutland@arm.com" <mark.rutland@arm.com>,
	"andrew@lunn.ch" <andrew@lunn.ch>,
	"frank-w@public-files.de" <frank-w@public-files.de>,
	"f.fainelli@gmail.com" <f.fainelli@gmail.com>,
	"dqfext@gmail.com" <dqfext@gmail.com>,
	"vivien.didelot@savoirfairelinux.com"
	<vivien.didelot@savoirfairelinux.com>,
	"netdev@vger.kernel.org" <netdev@vger.kernel.org>,
	Sean Wang <Sean.Wang@mediatek.com>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"opensource@vdorst.com" <opensource@vdorst.com>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"robh+dt@kernel.org" <robh+dt@kernel.org>,
	"linux-mediatek@lists.infradead.org"
	<linux-mediatek@lists.infradead.org>,
	"matthias.bgg@gmail.com" <matthias.bgg@gmail.com>,
	"davem@davemloft.net" <davem@davemloft.net>
Subject: Re: [PATCH net-next v2 7/7] arm64: dts: mt7622: add mt7531 dsa to bananapi-bpi-r64 board
Date: Wed, 19 Aug 2020 11:51:22 +0300	[thread overview]
Message-ID: <20200819085122.wiuq3fi23rebja6d@skbuf> (raw)
In-Reply-To: <1597824901.31846.42.camel@mtksdccf07>

On Wed, Aug 19, 2020 at 04:15:01PM +0800, Landen Chao wrote:
> On Wed, 2020-08-19 at 00:24 +0800, Vladimir Oltean wrote:
> > On Tue, Aug 18, 2020 at 03:14:12PM +0800, Landen Chao wrote:
> > > Add mt7531 dsa to bananapi-bpi-r64 board for 5 giga Ethernet ports support.
> > > 
> > > Signed-off-by: Landen Chao <landen.chao@mediatek.com>
> > > ---
> > >  .../dts/mediatek/mt7622-bananapi-bpi-r64.dts  | 44 +++++++++++++++++++
> > >  1 file changed, 44 insertions(+)
> > > 
> > > diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
> > > index d174ad214857..c57b2571165f 100644
> > > --- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
> > > +++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
> > > @@ -143,6 +143,50 @@
> > >  	mdio: mdio-bus {
> > >  		#address-cells = <1>;
> > >  		#size-cells = <0>;
> > > +
> > > +		switch@0 {
> > > +			compatible = "mediatek,mt7531";
> > > +
> [snip]
> > > +				port@6 {
> > > +					reg = <6>;
> > > +					label = "cpu";
> > > +					ethernet = <&gmac0>;
> > > +					phy-mode = "2500base-x";
> > > +				};
> > 
> > Is there any reason why you're not specifying a fixed-link node here?
> I got the below feedback in v1, so I follow the DSA common design in v2.
> v2 can work with fixed-link node or without fixed-link node in CPU port
> node.
> 
>   "This fixed-link should not be needed. The DSA driver is supposed to
>    configure the CPU port to its fastest speed by default. 2500 is
>    the fastest speed a 2500Base-X link can do..."

See this discussion and the replies to it:

https://www.spinics.net/lists/netdev/msg630102.html

I think if mt7530 is using phylink for non-netdev ports (and it is), it
would be good to have standard bindings that phylink can parse. For
example, in lack of a "pause" specifier, will the CPU port use flow
control or won't it? Why? I think there's simply no good reason why
you'd omit 3 more lines now.

> > > +			};
> > > +		};
> > > +
> > >  	};
> > >  };
> > >  
> > > -- 
> > > 2.17.1
> > 
> > Thanks,
> > -Vladimir
> 

-Vladimir

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek