From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-10.0 required=3.0 tests=BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,INCLUDES_PATCH,MAILING_LIST_MULTI,SIGNED_OFF_BY, SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id B310EC2D0A3 for ; Tue, 3 Nov 2020 22:57:06 +0000 (UTC) Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 2E42B2242E for ; Tue, 3 Nov 2020 22:57:06 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="XA3/fO+s"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=kernel.org header.i=@kernel.org header.b="kgXzOdjv" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 2E42B2242E Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=kernel.org Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-mediatek-bounces+linux-mediatek=archiver.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=merlin.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:In-Reply-To:MIME-Version:Message-ID:Subject:To:From: Date:Reply-To:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:References:List-Owner; bh=+RPD1k6MVrPdq2YqXcaQcPgmIq3ipa4ChpbNVT/L/do=; b=XA3/fO+sYFysPJNGbd9idWKUa +cQV9cXDdoCOfxKoSPtrehcXU14EVxN32kJfWYBnZVsgzXvB7wueAZX8jMGMDw+qbV6BPH+oKdkxG +zv8pdIfBUY1Gs0dRtUrd1YlzXczOTq0RSM6g8Txo2So4qxP8OtMQXOWbYI59XBzNBtPWsZfiDOOM xKFYZ5Z3a/F0OLfqWQ+pKB03hly5C7aOpsBvleGmWoAeBIr/kpya+Ytz6ZR2BJcNpWUMxLXNuGlwk DhjVuNPXB20hPdG7683m9qS8Ve3c/30BWRZAZEXfK56eLOH9TvSVdflIlonMz6088BMwBdLvgcIxm 221SPX+jw==; Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1ka5EX-0007PY-Mc; Tue, 03 Nov 2020 22:56:57 +0000 Received: from mail.kernel.org ([198.145.29.99]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1ka5EP-0007O5-Uh; Tue, 03 Nov 2020 22:56:51 +0000 Received: from localhost (230.sub-72-107-127.myvzw.com [72.107.127.230]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPSA id C150F22403; Tue, 3 Nov 2020 22:56:48 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=default; t=1604444209; bh=dRvs3Am9oi+dA2dshDT8rT6pIILXvzWwIyROrQ713no=; h=Date:From:To:Cc:Subject:In-Reply-To:From; b=kgXzOdjv0e2RHQFQbvN1XLgo+FvY8K6dNJy7rHGfSSuPaR+BNjyLEIA31cXku9fOc pndJu5Y8KvJA48KZVpre6qRJRE++hFK6aQShmUQ+mMBonQ6R5ZOVVb1LnDlOhUKWJF TheSOIMjjheJIdCSxENvMHHVJjn5dTM3rKIz2Qxg= Date: Tue, 3 Nov 2020 16:56:47 -0600 From: Bjorn Helgaas To: Chuanjia Liu Subject: Re: [PATCH v7 1/4] dt-bindings: pci: mediatek: Modified the Device tree bindings Message-ID: <20201103225647.GA272422@bjorn-Precision-5520> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <20201029081513.10562-2-chuanjia.liu@mediatek.com> X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20201103_175650_207588_28AE1216 X-CRM114-Status: GOOD ( 23.83 ) X-BeenThere: linux-mediatek@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: devicetree@vger.kernel.org, Lorenzo Pieralisi , Frank Wunderlich , linux-pci@vger.kernel.org, Ryder Lee , Bjorn Helgaas , Rob Herring , linux-mediatek@lists.infradead.org, linux-arm-kernel@lists.infradead.org, Matthias Brugger , yong.wu@mediatek.com Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "Linux-mediatek" Errors-To: linux-mediatek-bounces+linux-mediatek=archiver.kernel.org@lists.infradead.org Run "git log --oneline" and follow the convention, e.g., dt-bindings: PCI: mediatek: ... On Thu, Oct 29, 2020 at 04:15:10PM +0800, Chuanjia Liu wrote: > Split the PCIe node and add pciecfg node to fix MSI issue. I assume "split" refers to the new yaml file? It's not really obvious how the two files are connected. Could this be done in two patches? One for the split and one for the MSI issue? It'd be nice to say something more about the MSI issue. > Signed-off-by: Chuanjia Liu > Acked-by: Ryder Lee > --- > .../bindings/pci/mediatek-pcie-cfg.yaml | 39 ++++++ > .../devicetree/bindings/pci/mediatek-pcie.txt | 129 +++++++++++------- > 2 files changed, 118 insertions(+), 50 deletions(-) > create mode 100644 Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml > > diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml > new file mode 100644 > index 000000000000..d3ecbcd032a2 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml > @@ -0,0 +1,39 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pci/mediatek-pcie-cfg.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Mediatek PCIECFG controller > + > +maintainers: > + - Chuanjia Liu > + - Jianjun Wang > + > +description: | > + The MediaTek PCIECFG controller controls some feature about > + LTSSM, ASPM and so on. > + > +properties: > + compatible: > + items: > + - enum: > + - mediatek,generic-pciecfg > + - const: syscon > + > + reg: > + maxItems: 1 > + > +required: > + - compatible > + - reg > + > +additionalProperties: false > + > +examples: > + - | > + pciecfg: pciecfg@1a140000 { > + compatible = "mediatek,generic-pciecfg", "syscon"; > + reg = <0x1a140000 0x1000>; > + }; > +... > diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt > index 7468d666763a..c14a2745de37 100644 > --- a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt > +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt > @@ -8,7 +8,7 @@ Required properties: > "mediatek,mt7623-pcie" > "mediatek,mt7629-pcie" > - device_type: Must be "pci" > -- reg: Base addresses and lengths of the PCIe subsys and root ports. > +- reg: Base addresses and lengths of the root ports. > - reg-names: Names of the above areas to use during resource lookup. > - #address-cells: Address representation for root ports (must be 3) > - #size-cells: Size representation for root ports (must be 2) > @@ -143,56 +143,71 @@ Examples for MT7623: > > Examples for MT2712: > > - pcie: pcie@11700000 { > + pcie1: pcie@112ff000 { > compatible = "mediatek,mt2712-pcie"; > device_type = "pci"; > - reg = <0 0x11700000 0 0x1000>, > - <0 0x112ff000 0 0x1000>; > - reg-names = "port0", "port1"; > + reg = <0 0x112ff000 0 0x1000>; > + reg-names = "port1"; > #address-cells = <3>; > #size-cells = <2>; > - interrupts = , > - ; > - clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>, > - <&topckgen CLK_TOP_PE2_MAC_P1_SEL>, > - <&pericfg CLK_PERI_PCIE0>, > + interrupts = ; > + interrupt-names = "pcie_irq"; > + clocks = <&topckgen CLK_TOP_PE2_MAC_P1_SEL>, > <&pericfg CLK_PERI_PCIE1>; > - clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1"; > - phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>; > - phy-names = "pcie-phy0", "pcie-phy1"; > + clock-names = "sys_ck1", "ahb_ck1"; > + phys = <&u3port1 PHY_TYPE_PCIE>; > + phy-names = "pcie-phy1"; > bus-range = <0x00 0xff>; > - ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; > + ranges = <0x82000000 0 0x11400000 0x0 0x11400000 0 0x300000>; > > - pcie0: pcie@0,0 { > - reg = <0x0000 0 0 0 0>; > + slot1: pcie@1,0 { > + reg = <0x0800 0 0 0 0>; > #address-cells = <3>; > #size-cells = <2>; > #interrupt-cells = <1>; > ranges; > interrupt-map-mask = <0 0 0 7>; > - interrupt-map = <0 0 0 1 &pcie_intc0 0>, > - <0 0 0 2 &pcie_intc0 1>, > - <0 0 0 3 &pcie_intc0 2>, > - <0 0 0 4 &pcie_intc0 3>; > - pcie_intc0: interrupt-controller { > + interrupt-map = <0 0 0 1 &pcie_intc1 0>, > + <0 0 0 2 &pcie_intc1 1>, > + <0 0 0 3 &pcie_intc1 2>, > + <0 0 0 4 &pcie_intc1 3>; > + pcie_intc1: interrupt-controller { > interrupt-controller; > #address-cells = <0>; > #interrupt-cells = <1>; > }; > }; > + }; > > - pcie1: pcie@1,0 { > - reg = <0x0800 0 0 0 0>; > + pcie0: pcie@11700000 { > + compatible = "mediatek,mt2712-pcie"; > + device_type = "pci"; > + reg = <0 0x11700000 0 0x1000>; > + reg-names = "port0"; > + #address-cells = <3>; > + #size-cells = <2>; > + interrupts = ; > + interrupt-names = "pcie_irq"; > + clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>, > + <&pericfg CLK_PERI_PCIE0>; > + clock-names = "sys_ck0", "ahb_ck0"; > + phys = <&u3port0 PHY_TYPE_PCIE>; > + phy-names = "pcie-phy0"; > + bus-range = <0x00 0xff>; > + ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; > + > + slot0: pcie@0,0 { > + reg = <0x0000 0 0 0 0>; > #address-cells = <3>; > #size-cells = <2>; > #interrupt-cells = <1>; > ranges; > interrupt-map-mask = <0 0 0 7>; > - interrupt-map = <0 0 0 1 &pcie_intc1 0>, > - <0 0 0 2 &pcie_intc1 1>, > - <0 0 0 3 &pcie_intc1 2>, > - <0 0 0 4 &pcie_intc1 3>; > - pcie_intc1: interrupt-controller { > + interrupt-map = <0 0 0 1 &pcie_intc0 0>, > + <0 0 0 2 &pcie_intc0 1>, > + <0 0 0 3 &pcie_intc0 2>, > + <0 0 0 4 &pcie_intc0 3>; > + pcie_intc0: interrupt-controller { > interrupt-controller; > #address-cells = <0>; > #interrupt-cells = <1>; > @@ -202,39 +217,29 @@ Examples for MT2712: > > Examples for MT7622: > > - pcie: pcie@1a140000 { > + pcie0: pcie@1a143000 { > compatible = "mediatek,mt7622-pcie"; > device_type = "pci"; > - reg = <0 0x1a140000 0 0x1000>, > - <0 0x1a143000 0 0x1000>, > - <0 0x1a145000 0 0x1000>; > - reg-names = "subsys", "port0", "port1"; > + reg = <0 0x1a143000 0 0x1000>; > + reg-names = "port0"; > #address-cells = <3>; > #size-cells = <2>; > - interrupts = , > - ; > + interrupts = ; > + interrupt-names = "pcie_irq"; > clocks = <&pciesys CLK_PCIE_P0_MAC_EN>, > - <&pciesys CLK_PCIE_P1_MAC_EN>, > <&pciesys CLK_PCIE_P0_AHB_EN>, > - <&pciesys CLK_PCIE_P1_AHB_EN>, > <&pciesys CLK_PCIE_P0_AUX_EN>, > - <&pciesys CLK_PCIE_P1_AUX_EN>, > <&pciesys CLK_PCIE_P0_AXI_EN>, > - <&pciesys CLK_PCIE_P1_AXI_EN>, > <&pciesys CLK_PCIE_P0_OBFF_EN>, > - <&pciesys CLK_PCIE_P1_OBFF_EN>, > - <&pciesys CLK_PCIE_P0_PIPE_EN>, > - <&pciesys CLK_PCIE_P1_PIPE_EN>; > - clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1", > - "aux_ck0", "aux_ck1", "axi_ck0", "axi_ck1", > - "obff_ck0", "obff_ck1", "pipe_ck0", "pipe_ck1"; > - phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>; > - phy-names = "pcie-phy0", "pcie-phy1"; > + <&pciesys CLK_PCIE_P0_PIPE_EN>; > + clock-names = "sys_ck0", "ahb_ck0", "aux_ck0", > + "axi_ck0", "obff_ck0", "pipe_ck0"; > + > power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; > bus-range = <0x00 0xff>; > - ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; > + ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x8000000>; > > - pcie0: pcie@0,0 { > + slot0: pcie@0,0 { > reg = <0x0000 0 0 0 0>; > #address-cells = <3>; > #size-cells = <2>; > @@ -251,8 +256,32 @@ Examples for MT7622: > #interrupt-cells = <1>; > }; > }; > + }; > + > + pcie1: pcie@1a145000 { > + compatible = "mediatek,mt7622-pcie"; > + device_type = "pci"; > + reg = <0 0x1a145000 0 0x1000>; > + reg-names = "port1"; > + #address-cells = <3>; > + #size-cells = <2>; > + interrupts = ; > + interrupt-names = "pcie_irq"; > + clocks = <&pciesys CLK_PCIE_P1_MAC_EN>, > + /* designer has connect RC1 with p0_ahb clock */ > + <&pciesys CLK_PCIE_P0_AHB_EN>, > + <&pciesys CLK_PCIE_P1_AUX_EN>, > + <&pciesys CLK_PCIE_P1_AXI_EN>, > + <&pciesys CLK_PCIE_P1_OBFF_EN>, > + <&pciesys CLK_PCIE_P1_PIPE_EN>; > + clock-names = "sys_ck1", "ahb_ck1", "aux_ck1", > + "axi_ck1", "obff_ck1", "pipe_ck1"; > + > + power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; > + bus-range = <0x00 0xff>; > + ranges = <0x82000000 0 0x28000000 0x0 0x28000000 0 0x8000000>; > > - pcie1: pcie@1,0 { > + slot1: pcie@1,0 { > reg = <0x0800 0 0 0 0>; > #address-cells = <3>; > #size-cells = <2>; > -- > 2.18.0 > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel _______________________________________________ Linux-mediatek mailing list Linux-mediatek@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-mediatek