From: Bilal Wasim <bilalwasim676@gmail.com>
To: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Jitao Shi <jitao.shi@mediatek.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
David Airlie <airlied@linux.ie>,
linux-kernel <linux-kernel@vger.kernel.org>,
DRI Development <dri-devel@lists.freedesktop.org>,
"moderated list:ARM/Mediatek SoC support"
<linux-mediatek@lists.infradead.org>,
Daniel Vetter <daniel@ffwll.ch>, CK Hu <ck.hu@mediatek.com>
Subject: Re: [PATCH] drm/mediatek: dsi: Calculate horizontal_backporch_byte by itself
Date: Mon, 16 Nov 2020 00:25:22 +0500 [thread overview]
Message-ID: <20201116002522.1a5c3736@a-VirtualBox> (raw)
In-Reply-To: <CAAOTY_-16s=NXg2kOJijhO+82nNsT9HkKj4PVh1qN8dKchBOBA@mail.gmail.com>
Hi CK,
On Sun, 15 Nov 2020 08:53:24 +0800
Chun-Kuang Hu <chunkuang.hu@kernel.org> wrote:
> Hi, Bilal:
>
> Please help to test this patch on your Chromebook elm, thanks.
>
> Regards,
> Chun-Kuang Hu
Just tried this patch on the Chromebook Elm, and it doesn't work. The
HDMI screen remains black, though the rest of the system keeps on
operating normally.
>
> Chun-Kuang Hu <chunkuang.hu@kernel.org> 於 2020年11月15日 週日
> 上午8:14寫道:
> >
> > From: CK Hu <ck.hu@mediatek.com>
> >
> > Using vm->hfront_porch + vm->hback_porch to calculate
> > horizontal_backporch_byte would make it negtive, so
> > use horizontal_backporch_byte itself to make it positive.
> >
> > Fixes: 35bf948f1edb ("drm/mediatek: dsi: Fix scrolling of panel
> > with small hfp or hbp")
> >
> > Signed-off-by: CK Hu <ck.hu@mediatek.com>
> > Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
> > ---
> > drivers/gpu/drm/mediatek/mtk_dsi.c | 53
> > ++++++++++-------------------- 1 file changed, 18 insertions(+), 35
> > deletions(-)
> >
> > diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c
> > b/drivers/gpu/drm/mediatek/mtk_dsi.c index
> > 4a188a942c38..2a64fdaed9a7 100644 ---
> > a/drivers/gpu/drm/mediatek/mtk_dsi.c +++
> > b/drivers/gpu/drm/mediatek/mtk_dsi.c @@ -444,7 +444,10 @@ static
> > void mtk_dsi_config_vdo_timing(struct mtk_dsi *dsi) u32
> > horizontal_sync_active_byte; u32 horizontal_backporch_byte;
> > u32 horizontal_frontporch_byte;
> > + u32 horizontal_front_back_byte;
> > + u32 data_phy_cycles_byte;
> > u32 dsi_tmp_buf_bpp, data_phy_cycles;
> > + u32 delta;
> > struct mtk_phy_timing *timing = &dsi->phy_timing;
> >
> > struct videomode *vm = &dsi->vm;
> > @@ -474,42 +477,22 @@ static void mtk_dsi_config_vdo_timing(struct
> > mtk_dsi *dsi) data_phy_cycles = timing->lpx + timing->da_hs_prepare
> > + timing->da_hs_zero + timing->da_hs_exit;
> >
> > - if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) {
> > - if ((vm->hfront_porch + vm->hback_porch) *
> > dsi_tmp_buf_bpp >
> > - data_phy_cycles * dsi->lanes + 18) {
> > - horizontal_frontporch_byte =
> > - vm->hfront_porch * dsi_tmp_buf_bpp -
> > - (data_phy_cycles * dsi->lanes + 18)
> > *
> > - vm->hfront_porch /
> > - (vm->hfront_porch +
> > vm->hback_porch); -
> > - horizontal_backporch_byte =
> > - horizontal_backporch_byte -
> > - (data_phy_cycles * dsi->lanes + 18)
> > *
> > - vm->hback_porch /
> > - (vm->hfront_porch +
> > vm->hback_porch);
> > - } else {
> > - DRM_WARN("HFP less than d-phy, FPS will
> > under 60Hz\n");
> > - horizontal_frontporch_byte =
> > vm->hfront_porch *
> > -
> > dsi_tmp_buf_bpp;
> > - }
> > + delta = dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST ? 18 :
> > 12; +
> > + horizontal_frontporch_byte = vm->hfront_porch *
> > dsi_tmp_buf_bpp;
> > + horizontal_front_back_byte = horizontal_frontporch_byte +
> > horizontal_backporch_byte;
> > + data_phy_cycles_byte = data_phy_cycles * dsi->lanes + delta;
> > +
> > + if (horizontal_front_back_byte > data_phy_cycles_byte) {
> > + horizontal_frontporch_byte -= data_phy_cycles_byte *
> > +
> > horizontal_frontporch_byte /
> > +
> > horizontal_front_back_byte; +
> > + horizontal_backporch_byte -= data_phy_cycles_byte *
> > +
> > horizontal_backporch_byte /
> > +
> > horizontal_front_back_byte; } else {
> > - if ((vm->hfront_porch + vm->hback_porch) *
> > dsi_tmp_buf_bpp >
> > - data_phy_cycles * dsi->lanes + 12) {
> > - horizontal_frontporch_byte =
> > - vm->hfront_porch * dsi_tmp_buf_bpp -
> > - (data_phy_cycles * dsi->lanes + 12)
> > *
> > - vm->hfront_porch /
> > - (vm->hfront_porch +
> > vm->hback_porch);
> > - horizontal_backporch_byte =
> > horizontal_backporch_byte -
> > - (data_phy_cycles * dsi->lanes + 12)
> > *
> > - vm->hback_porch /
> > - (vm->hfront_porch +
> > vm->hback_porch);
> > - } else {
> > - DRM_WARN("HFP less than d-phy, FPS will
> > under 60Hz\n");
> > - horizontal_frontporch_byte =
> > vm->hfront_porch *
> > -
> > dsi_tmp_buf_bpp;
> > - }
> > + DRM_WARN("HFP + HBP less than d-phy, FPS will under
> > 60Hz\n"); }
> >
> > writel(horizontal_sync_active_byte, dsi->regs + DSI_HSA_WC);
> > --
> > 2.17.1
> >
Thanks,
Bilal
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
next prev parent reply other threads:[~2020-11-15 19:25 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-15 0:14 [PATCH] drm/mediatek: dsi: Calculate horizontal_backporch_byte by itself Chun-Kuang Hu
2020-11-15 0:53 ` Chun-Kuang Hu
2020-11-15 19:25 ` Bilal Wasim [this message]
2020-11-15 23:12 ` Chun-Kuang Hu
2020-11-16 11:53 ` Bilal Wasim
2020-11-16 16:43 ` Chun-Kuang Hu
2020-11-17 11:58 ` Bilal Wasim
2020-11-17 12:01 ` Bilal Wasim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201116002522.1a5c3736@a-VirtualBox \
--to=bilalwasim676@gmail.com \
--cc=airlied@linux.ie \
--cc=chunkuang.hu@kernel.org \
--cc=ck.hu@mediatek.com \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=jitao.shi@mediatek.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=p.zabel@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).