From: Bilal Wasim <bilalwasim676@gmail.com>
To: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Jitao Shi <jitao.shi@mediatek.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
David Airlie <airlied@linux.ie>,
linux-kernel <linux-kernel@vger.kernel.org>,
DRI Development <dri-devel@lists.freedesktop.org>,
"moderated list:ARM/Mediatek SoC support"
<linux-mediatek@lists.infradead.org>,
Daniel Vetter <daniel@ffwll.ch>, CK Hu <ck.hu@mediatek.com>
Subject: Re: [PATCH] drm/mediatek: dsi: Calculate horizontal_backporch_byte by itself
Date: Mon, 16 Nov 2020 16:53:11 +0500 [thread overview]
Message-ID: <20201116165311.15a36e82@a-VirtualBox> (raw)
In-Reply-To: <CAAOTY_-_N9pcmao0FFtGs-qVLrvA-QBz5FJrSaYynuMZMe1Qhg@mail.gmail.com>
Hi CK,
On Mon, 16 Nov 2020 07:12:55 +0800
Chun-Kuang Hu <chunkuang.hu@kernel.org> wrote:
> Hi, Bilal:
>
> Bilal Wasim <bilalwasim676@gmail.com> 於 2020年11月16日 週一
> 上午3:25寫道:
> >
> > Hi CK,
> >
> > On Sun, 15 Nov 2020 08:53:24 +0800
> > Chun-Kuang Hu <chunkuang.hu@kernel.org> wrote:
> >
> > > Hi, Bilal:
> > >
> > > Please help to test this patch on your Chromebook elm, thanks.
> > >
> > > Regards,
> > > Chun-Kuang Hu
> >
> > Just tried this patch on the Chromebook Elm, and it doesn't work.
> > The HDMI screen remains black, though the rest of the system keeps
> > on operating normally.
>
> Could you print this information, so I could find out the solution for
> both small hbp and elm.
>
> vm->hfront_porch, vm->hback_porch, dsi_tmp_buf_bpp,
> data_phy_cycles_byte, and the final horizontal_frontporch_byte,
> horizontal_backporch_byte.
Here are the values I got,
[ 2.506400] [drm] vm->hfront_porch: 48
[ 2.506402] [drm] vm->hback_porch: 200
[ 2.506404] [drm] dsi_tmp_buf_bpp: 3
[ 2.506406] [drm] data_phy_cycles_byte: 180
[ 2.506408] [drm] horizontal_frontporch_byte: 110
[ 2.506409] [drm] horizontal_backporch_byte: 455
Please let me know if I can help debug this in any other way.
Thanks,
Bilal
>
> Regards,
> Chun-Kuang.
>
> >
> > >
> > > Chun-Kuang Hu <chunkuang.hu@kernel.org> 於 2020年11月15日 週日
> > > 上午8:14寫道:
> > > >
> > > > From: CK Hu <ck.hu@mediatek.com>
> > > >
> > > > Using vm->hfront_porch + vm->hback_porch to calculate
> > > > horizontal_backporch_byte would make it negtive, so
> > > > use horizontal_backporch_byte itself to make it positive.
> > > >
> > > > Fixes: 35bf948f1edb ("drm/mediatek: dsi: Fix scrolling of panel
> > > > with small hfp or hbp")
> > > >
> > > > Signed-off-by: CK Hu <ck.hu@mediatek.com>
> > > > Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
> > > > ---
> > > > drivers/gpu/drm/mediatek/mtk_dsi.c | 53
> > > > ++++++++++-------------------- 1 file changed, 18
> > > > insertions(+), 35 deletions(-)
> > > >
> > > > diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c
> > > > b/drivers/gpu/drm/mediatek/mtk_dsi.c index
> > > > 4a188a942c38..2a64fdaed9a7 100644 ---
> > > > a/drivers/gpu/drm/mediatek/mtk_dsi.c +++
> > > > b/drivers/gpu/drm/mediatek/mtk_dsi.c @@ -444,7 +444,10 @@ static
> > > > void mtk_dsi_config_vdo_timing(struct mtk_dsi *dsi) u32
> > > > horizontal_sync_active_byte; u32 horizontal_backporch_byte;
> > > > u32 horizontal_frontporch_byte;
> > > > + u32 horizontal_front_back_byte;
> > > > + u32 data_phy_cycles_byte;
> > > > u32 dsi_tmp_buf_bpp, data_phy_cycles;
> > > > + u32 delta;
> > > > struct mtk_phy_timing *timing = &dsi->phy_timing;
> > > >
> > > > struct videomode *vm = &dsi->vm;
> > > > @@ -474,42 +477,22 @@ static void
> > > > mtk_dsi_config_vdo_timing(struct mtk_dsi *dsi) data_phy_cycles
> > > > = timing->lpx + timing->da_hs_prepare
> > > > + timing->da_hs_zero + timing->da_hs_exit;
> > > >
> > > > - if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) {
> > > > - if ((vm->hfront_porch + vm->hback_porch) *
> > > > dsi_tmp_buf_bpp >
> > > > - data_phy_cycles * dsi->lanes + 18) {
> > > > - horizontal_frontporch_byte =
> > > > - vm->hfront_porch *
> > > > dsi_tmp_buf_bpp -
> > > > - (data_phy_cycles * dsi->lanes +
> > > > 18) *
> > > > - vm->hfront_porch /
> > > > - (vm->hfront_porch +
> > > > vm->hback_porch); -
> > > > - horizontal_backporch_byte =
> > > > - horizontal_backporch_byte -
> > > > - (data_phy_cycles * dsi->lanes +
> > > > 18) *
> > > > - vm->hback_porch /
> > > > - (vm->hfront_porch +
> > > > vm->hback_porch);
> > > > - } else {
> > > > - DRM_WARN("HFP less than d-phy, FPS will
> > > > under 60Hz\n");
> > > > - horizontal_frontporch_byte =
> > > > vm->hfront_porch *
> > > > -
> > > > dsi_tmp_buf_bpp;
> > > > - }
> > > > + delta = dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST ?
> > > > 18 : 12; +
> > > > + horizontal_frontporch_byte = vm->hfront_porch *
> > > > dsi_tmp_buf_bpp;
> > > > + horizontal_front_back_byte = horizontal_frontporch_byte
> > > > + horizontal_backporch_byte;
> > > > + data_phy_cycles_byte = data_phy_cycles * dsi->lanes +
> > > > delta; +
> > > > + if (horizontal_front_back_byte > data_phy_cycles_byte) {
> > > > + horizontal_frontporch_byte -=
> > > > data_phy_cycles_byte * +
> > > > horizontal_frontporch_byte /
> > > > +
> > > > horizontal_front_back_byte; +
> > > > + horizontal_backporch_byte -=
> > > > data_phy_cycles_byte * +
> > > > horizontal_backporch_byte /
> > > > +
> > > > horizontal_front_back_byte; } else {
> > > > - if ((vm->hfront_porch + vm->hback_porch) *
> > > > dsi_tmp_buf_bpp >
> > > > - data_phy_cycles * dsi->lanes + 12) {
> > > > - horizontal_frontporch_byte =
> > > > - vm->hfront_porch *
> > > > dsi_tmp_buf_bpp -
> > > > - (data_phy_cycles * dsi->lanes +
> > > > 12) *
> > > > - vm->hfront_porch /
> > > > - (vm->hfront_porch +
> > > > vm->hback_porch);
> > > > - horizontal_backporch_byte =
> > > > horizontal_backporch_byte -
> > > > - (data_phy_cycles * dsi->lanes +
> > > > 12) *
> > > > - vm->hback_porch /
> > > > - (vm->hfront_porch +
> > > > vm->hback_porch);
> > > > - } else {
> > > > - DRM_WARN("HFP less than d-phy, FPS will
> > > > under 60Hz\n");
> > > > - horizontal_frontporch_byte =
> > > > vm->hfront_porch *
> > > > -
> > > > dsi_tmp_buf_bpp;
> > > > - }
> > > > + DRM_WARN("HFP + HBP less than d-phy, FPS will
> > > > under 60Hz\n"); }
> > > >
> > > > writel(horizontal_sync_active_byte, dsi->regs +
> > > > DSI_HSA_WC); --
> > > > 2.17.1
> > > >
> >
> > Thanks,
> > Bilal
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
next prev parent reply other threads:[~2020-11-16 12:40 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-15 0:14 [PATCH] drm/mediatek: dsi: Calculate horizontal_backporch_byte by itself Chun-Kuang Hu
2020-11-15 0:53 ` Chun-Kuang Hu
2020-11-15 19:25 ` Bilal Wasim
2020-11-15 23:12 ` Chun-Kuang Hu
2020-11-16 11:53 ` Bilal Wasim [this message]
2020-11-16 16:43 ` Chun-Kuang Hu
2020-11-17 11:58 ` Bilal Wasim
2020-11-17 12:01 ` Bilal Wasim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201116165311.15a36e82@a-VirtualBox \
--to=bilalwasim676@gmail.com \
--cc=airlied@linux.ie \
--cc=chunkuang.hu@kernel.org \
--cc=ck.hu@mediatek.com \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=jitao.shi@mediatek.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=p.zabel@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).