[PATCH v4 3/3] pwm: mtk-disp: Switch to atomic API

[Jitao Shi <jitao.shi@mediatek.com>]

Convert the legacy api to atomic API.

Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
---
 drivers/pwm/pwm-mtk-disp.c | 78 ++++++++++++++++++++++++++++----------
 1 file changed, 59 insertions(+), 19 deletions(-)

diff --git a/drivers/pwm/pwm-mtk-disp.c b/drivers/pwm/pwm-mtk-disp.c
index b87b3c00a685..d77348d0527c 100644
--- a/drivers/pwm/pwm-mtk-disp.c
+++ b/drivers/pwm/pwm-mtk-disp.c
@@ -67,8 +67,8 @@ static void mtk_disp_pwm_update_bits(struct mtk_disp_pwm *mdp, u32 offset,
 	writel(value, address);
 }
 
-static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
-			       int duty_ns, int period_ns)
+static int mtk_disp_pwm_config(struct pwm_chip *chip,
+			       const struct pwm_state *state)
 {
 	struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip);
 	u32 clk_div, period, high_width, value;
@@ -102,7 +102,7 @@ static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	 * high_width = (PWM_CLK_RATE * duty_ns) / (10^9 * (clk_div + 1))
 	 */
 	rate = clk_get_rate(mdp->clk_main);
-	clk_div = div_u64(rate * period_ns, NSEC_PER_SEC) >>
+	clk_div = div_u64(rate * state->period, NSEC_PER_SEC) >>
 			  PWM_PERIOD_BIT_WIDTH;
 	if (clk_div > PWM_CLKDIV_MAX) {
 		dev_err(chip->dev, "clock rate is too high: rate = %d Hz\n",
@@ -114,11 +114,11 @@ static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 		return -EINVAL;
 	}
 	div = NSEC_PER_SEC * (clk_div + 1);
-	period = div64_u64(rate * period_ns, div);
+	period = div64_u64(rate * state->period, div);
 	if (period > 0)
 		period--;
 
-	high_width = div64_u64(rate * duty_ns, div);
+	high_width = div64_u64(rate * state->duty_cycle, div);
 	value = period | (high_width << PWM_HIGH_WIDTH_SHIFT);
 
 	mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
@@ -144,39 +144,79 @@ static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 					 mdp->data->con0_sel);
 	}
 
+	mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, mdp->data->enable_mask,
+				 mdp->data->enable_mask);
+	mdp->enabled = true;
+
 	return 0;
 }
 
-static int mtk_disp_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+static int mtk_disp_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			      const struct pwm_state *state)
 {
 	struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip);
-	int err;
 
-	mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, mdp->data->enable_mask,
-				 mdp->data->enable_mask);
-	mdp->enabled = true;
+	if (!state->enabled) {
+		mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, mdp->data->enable_mask,
+					 0x0);
 
-	return 0;
+		if (mdp->enabled) {
+			clk_disable_unprepare(mdp->clk_mm);
+			clk_disable_unprepare(mdp->clk_main);
+		}
+		mdp->enabled = false;
+		return 0;
+	}
+
+	return mtk_disp_pwm_config(chip, state);
 }
 
-static void mtk_disp_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+static void mtk_disp_pwm_get_state(struct pwm_chip *chip,
+				   struct pwm_device *pwm,
+				   struct pwm_state *state)
 {
 	struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip);
+	u32 clk_div, period, high_width, con0, con1;
+	u64 rate;
+	int err;
 
-	mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, mdp->data->enable_mask,
-				 0x0);
+	if (!mdp->enabled) {
+		err = clk_prepare_enable(mdp->clk_main);
+		if (err < 0) {
+			dev_err(chip->dev, "Can't enable mdp->clk_main: %d\n", err);
+			return;
+		}
+		err = clk_prepare_enable(mdp->clk_mm);
+		if (err < 0) {
+			dev_err(chip->dev, "Can't enable mdp->clk_mm: %d\n", err);
+			clk_disable_unprepare(mdp->clk_main);
+			return;
+		}
+	}
+
+	rate = clk_get_rate(mdp->clk_main);
 
-	if (mdp->enabled) {
+	con0 = readl(mdp->base + mdp->data->con0);
+	con1 = readl(mdp->base + mdp->data->con1);
+
+	state->enabled = !!(con0 & BIT(0));
+
+	clk_div = (con0 & PWM_CLKDIV_MASK) >> PWM_CLKDIV_SHIFT;
+	period = con1 & PWM_PERIOD_MASK;
+	state->period = div_u64(period * (clk_div + 1) * NSEC_PER_SEC, rate);
+	high_width = (con1 & PWM_HIGH_WIDTH_MASK) >> PWM_HIGH_WIDTH_SHIFT;
+	state->duty_cycle = div_u64(high_width * (clk_div + 1) * NSEC_PER_SEC,
+				    rate);
+
+	if (!mdp->enabled) {
 		clk_disable_unprepare(mdp->clk_mm);
 		clk_disable_unprepare(mdp->clk_main);
 	}
-	mdp->enabled = false;
 }
 
 static const struct pwm_ops mtk_disp_pwm_ops = {
-	.config = mtk_disp_pwm_config,
-	.enable = mtk_disp_pwm_enable,
-	.disable = mtk_disp_pwm_disable,
+	.apply = mtk_disp_pwm_apply,
+	.get_state = mtk_disp_pwm_get_state,
 	.owner = THIS_MODULE,
 };
 
-- 
2.25.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek