From: Miles Chen <miles.chen@mediatek.com>
To: <angelogioacchino.delregno@collabora.com>
Cc: <devicetree@vger.kernel.org>, <hsinyi@chromium.org>,
<kewei.xu@mediatek.com>, <krzk+dt@kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-i2c@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-mediatek@lists.infradead.org>, <matthias.bgg@gmail.com>,
<qii.wang@mediatek.com>, <robh+dt@kernel.org>, <wsa@kernel.org>
Subject: Re: [PATCH] dt-bindings: i2c: convert i2c-mt65xx to json-schema
Date: Thu, 7 Apr 2022 07:24:00 +0800 [thread overview]
Message-ID: <20220406232400.2788-1-miles.chen@mediatek.com> (raw)
In-Reply-To: <20220406152940.140224-1-angelogioacchino.delregno@collabora.com>
Hi AngeloGioacchino,
> Convert I2C binding for MediaTek SoCs to Devicetree schema.
>
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> ---
> .../devicetree/bindings/i2c/i2c-mt65xx.txt | 53 --------
> .../devicetree/bindings/i2c/i2c-mt65xx.yaml | 118 ++++++++++++++++++
> MAINTAINERS | 2 +-
> 3 files changed, 119 insertions(+), 54 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt
> create mode 100644 Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml
>
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt
> deleted file mode 100644
> index 026985b8f61a..000000000000
> --- a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt
> +++ /dev/null
> @@ -1,53 +0,0 @@
> -* MediaTek's I2C controller
> -
> -The MediaTek's I2C controller is used to interface with I2C devices.
> -
> -Required properties:
> - - compatible: value should be either of the following.
> - "mediatek,mt2701-i2c", "mediatek,mt6577-i2c": for MediaTek MT2701
> - "mediatek,mt2712-i2c": for MediaTek MT2712
> - "mediatek,mt6577-i2c": for MediaTek MT6577
> - "mediatek,mt6589-i2c": for MediaTek MT6589
> - "mediatek,mt6797-i2c", "mediatek,mt6577-i2c": for MediaTek MT6797
> - "mediatek,mt7622-i2c": for MediaTek MT7622
> - "mediatek,mt7623-i2c", "mediatek,mt6577-i2c": for MediaTek MT7623
> - "mediatek,mt7629-i2c", "mediatek,mt2712-i2c": for MediaTek MT7629
> - "mediatek,mt8168-i2c": for MediaTek MT8168
> - "mediatek,mt8173-i2c": for MediaTek MT8173
> - "mediatek,mt8183-i2c": for MediaTek MT8183
> - "mediatek,mt8186-i2c": for MediaTek MT8186
> - "mediatek,mt8192-i2c": for MediaTek MT8192
> - "mediatek,mt8195-i2c", "mediatek,mt8192-i2c": for MediaTek MT8195
> - "mediatek,mt8516-i2c", "mediatek,mt2712-i2c": for MediaTek MT8516
> - - reg: physical base address of the controller and dma base, length of memory
> - mapped region.
> - - interrupts: interrupt number to the cpu.
> - - clock-div: the fixed value for frequency divider of clock source in i2c
> - module. Each IC may be different.
> - - clocks: clock name from clock manager
>- - clock-names: Must include "main" and "dma", "arb" is for multi-master that
>- one bus has more than two i2c controllers, if enable have-pmic need include
>- "pmic" extra.
snip
>+properties:
>+ compatible:
>+ oneOf:
>+ - const: mediatek,mt2712-i2c
>+ - const: mediatek,mt6577-i2c
>+ - const: mediatek,mt6589-i2c
>+ - const: mediatek,mt7622-i2c
>+ - const: mediatek,mt8168-i2c
>+ - const: mediatek,mt8173-i2c
>+ - const: mediatek,mt8183-i2c
>+ - const: mediatek,mt8186-i2c
>+ - const: mediatek,mt8192-i2c
>+ - items:
>+ - enum:
>+ - mediatek,mt7629-i2c
>+ - mediatek,mt8516-i2c
>+ - const: mediatek,mt2712-i2c
>+ - items:
>+ - enum:
>+ - mediatek,mt2701-i2c
>+ - mediatek,mt6797-i2c
>+ - mediatek,mt7623-i2c
>+ - const: mediatek,mt6577-i2c
>+ - items:
>+ - enum:
>+ - mediatek,mt8195-i2c
>+ - const: mediatek,mt8192-i2c
>+
>+ reg:
>+ items:
>+ - description: Physical base address
>+ - description: DMA base address
>+
>+ interrupts:
>+ maxItems: 1
>+
>+ clocks:
>+ minItems: 1
>+ items:
>+ - description: Main clock for I2C bus
>+ - description: Clock for I2C via DMA
>+ - description: Bus arbitrator clock
>+ - description: Clock for I2C from PMIC
>+
>+ clock-names:
>+ minItems: 1
>+ items:
>+ - const: main
>+ - const: dma
>+ - const: arb
>+ - const: pmic
I read "clock-names: Must include "main" and "dma"" from i2c-mt65xx.txt.
Does it means that we should have at least 2 clock-names (minItems: 2)?
Thanks,
Miles
>+
>+ clock-div:
>+ $ref: /schemas/types.yaml#/definitions/uint32
>+ description: Frequency divider of clock source in I2C module
>+
>+ clock-frequency:
>+ default: 100000
>+ description:
>+ SCL frequency to use (in Hz). If omitted, 100kHz is used.
>+
>+ mediatek,have-pmic:
>+ description: Platform controls I2C from PMIC side
>+ type: boolean
>+
>+ mediatek,use-push-pull:
>+ description: Use push-pull mode I/O config
>+ type: boolean
>+
>+ vbus-supply:
>+ description: Phandle to the regulator providing power to SCL/SDA
>+
>+required:
>+ - compatible
>+ - reg
>+ - clocks
>+ - clock-names
>+ - clock-div
>+ - interrupts
>+
>+unevaluatedProperties: false
>+
>+examples:
>+ - |
>+ #include <dt-bindings/interrupt-controller/arm-gic.h>
>+ #include <dt-bindings/interrupt-controller/irq.h>
>+
>+ i2c0: i2c@1100d000 {
>+ compatible = "mediatek,mt6577-i2c";
>+ reg = <0x1100d000 0x70>, <0x11000300 0x80>;
>+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
>+ clocks = <&i2c0_ck>, <&ap_dma_ck>;
>+ clock-names = "main", "dma";
>+ clock-div = <16>;
>+ clock-frequency = <400000>;
>+ mediatek,have-pmic;
>+
>+ #address-cells = <1>;
>+ #size-cells = <0>;
>+ };
>diff --git a/MAINTAINERS b/MAINTAINERS
>index ee0b5a70aff1..28a17d4c8d12 100644
>--- a/MAINTAINERS
>+++ b/MAINTAINERS
>@@ -12361,7 +12361,7 @@ MEDIATEK I2C CONTROLLER DRIVER
> M: Qii Wang <qii.wang@mediatek.com>
> L: linux-i2c@vger.kernel.org
> S: Maintained
>-F: Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt
>+F: Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml
> F: drivers/i2c/busses/i2c-mt65xx.c
>
> MEDIATEK IOMMU DRIVER
>--
>2.35.1
>
>
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
next prev parent reply other threads:[~2022-04-06 23:24 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-06 15:29 [PATCH] dt-bindings: i2c: convert i2c-mt65xx to json-schema AngeloGioacchino Del Regno
2022-04-06 23:24 ` Miles Chen [this message]
2022-04-07 9:45 ` AngeloGioacchino Del Regno
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220406232400.2788-1-miles.chen@mediatek.com \
--to=miles.chen@mediatek.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=devicetree@vger.kernel.org \
--cc=hsinyi@chromium.org \
--cc=kewei.xu@mediatek.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=qii.wang@mediatek.com \
--cc=robh+dt@kernel.org \
--cc=wsa@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox