Re: [PATCH v2] printk: ringbuffer: Improve prb_next_seq() performance

[Saravana Kannan <saravanak@google.com>]

> Petr Mladek <pmladek@suse.com> wrote:
> 
> prb_next_seq() always iterates from the first known sequence number.
> In the worst case, it might loop 8k times for 256kB buffer,
> 15k times for 512kB buffer, and 64k times for 2MB buffer.
> 
> It was reported that pooling and reading using syslog interface
> might occupy 50% of CPU.
> 
> Speedup the search by storing @id of the last finalized descriptor.
> 
> The loop is still needed because the @id is stored and read in the best
> effort way. An atomic variable is used to keep the @id consistent.
> But the stores and reads are not serialized against each other.
> The descriptor could get reused in the meantime. The related sequence
> number will be used only when it is still valid.
> 
> An invalid value should be read _only_ when there is a flood of messages
> and the ringbuffer is rapidly reused. The performance is the least
> problem in this case.
> 
> Reported-by: Chunlei Wang <chunlei.wang@mediatek.com>
> Signed-off-by: Petr Mladek <pmladek@suse.com>
> ---
> Changes against v1:
> 
>   + Read @seq by the last finalized @id directly in prb_next_seq() (John)
> 
>  kernel/printk/printk_ringbuffer.c | 49 ++++++++++++++++++++++++++++---
>  kernel/printk/printk_ringbuffer.h |  2 ++
>  2 files changed, 47 insertions(+), 4 deletions(-)
> 
> diff --git a/kernel/printk/printk_ringbuffer.c b/kernel/printk/printk_ringbuffer.c
> index 8a7b7362c0dd..24f47fbefbb5 100644
> --- a/kernel/printk/printk_ringbuffer.c
> +++ b/kernel/printk/printk_ringbuffer.c
> @@ -474,8 +474,10 @@ static enum desc_state desc_read(struct prb_desc_ring *desc_ring,
>  	 * state has been re-checked. A memcpy() for all of @desc
>  	 * cannot be used because of the atomic_t @state_var field.
>  	 */
> -	memcpy(&desc_out->text_blk_lpos, &desc->text_blk_lpos,
> -	       sizeof(desc_out->text_blk_lpos)); /* LMM(desc_read:C) */
> +	if (desc_out) {
> +		memcpy(&desc_out->text_blk_lpos, &desc->text_blk_lpos,
> +		       sizeof(desc_out->text_blk_lpos)); /* LMM(desc_read:C) */
> +	}
>  	if (seq_out)
>  		*seq_out = info->seq; /* also part of desc_read:C */
>  	if (caller_id_out)
> @@ -1449,6 +1451,9 @@ static void desc_make_final(struct prb_desc_ring *desc_ring, unsigned long id)
>  
>  	atomic_long_cmpxchg_relaxed(&d->state_var, prev_state_val,
>  			DESC_SV(id, desc_finalized)); /* LMM(desc_make_final:A) */
> +
> +	/* Best effort to remember the last finalized @id. */
> +	atomic_long_set(&desc_ring->last_finalized_id, id);
>  }
>  
>  /**
> @@ -1657,7 +1662,12 @@ void prb_commit(struct prb_reserved_entry *e)
>   */
>  void prb_final_commit(struct prb_reserved_entry *e)
>  {
> +	struct prb_desc_ring *desc_ring = &e->rb->desc_ring;
> +
>  	_prb_commit(e, desc_finalized);
> +
> +	/* Best effort to remember the last finalized @id. */
> +	atomic_long_set(&desc_ring->last_finalized_id, e->id);
>  }
>  
>  /*
> @@ -2005,9 +2015,39 @@ u64 prb_first_valid_seq(struct printk_ringbuffer *rb)
>   */
>  u64 prb_next_seq(struct printk_ringbuffer *rb)
>  {
> -	u64 seq = 0;
> +	struct prb_desc_ring *desc_ring = &rb->desc_ring;
> +	enum desc_state d_state;
> +	unsigned long id;
> +	u64 seq;
> +
> +	/* Check if the cached @id still points to a valid @seq. */
> +	id = atomic_long_read(&desc_ring->last_finalized_id);
> +	d_state = desc_read(desc_ring, id, NULL, &seq, NULL);
>  
> -	/* Search forward from the oldest descriptor. */
> +	if (d_state == desc_finalized || d_state == desc_reusable) {
> +		/*
> +		 * Begin searching after the last finalized record.
> +		 *
> +		 * On 0, the search must begin at 0 because of hack#2
> +		 * of the bootstrapping phase it is not known if a
> +		 * record at index 0 exists.
> +		 */
> +		if (seq != 0)
> +			seq++;
> +	} else {
> +		/*
> +		 * The information about the last finalized sequence number
> +		 * has gone. It should happen only when there is a flood of
> +		 * new messages and the ringbuffer is rapidly recycled.
> +		 * Give up and start from the beginning.
> +		 */
> +		seq = 0;
> +	}
> +
> +	/*
> +	 * The information about the last finalized @seq might be inaccurate.
> +	 * Search forward to find the current one.
> +	 */
>  	while (_prb_read_valid(rb, &seq, NULL, NULL))
>  		seq++;
>  
> @@ -2044,6 +2084,7 @@ void prb_init(struct printk_ringbuffer *rb,
>  	rb->desc_ring.infos = infos;
>  	atomic_long_set(&rb->desc_ring.head_id, DESC0_ID(descbits));
>  	atomic_long_set(&rb->desc_ring.tail_id, DESC0_ID(descbits));
> +	atomic_long_set(&rb->desc_ring.last_finalized_id, DESC0_ID(descbits));
>  
>  	rb->text_data_ring.size_bits = textbits;
>  	rb->text_data_ring.data = text_buf;
> diff --git a/kernel/printk/printk_ringbuffer.h b/kernel/printk/printk_ringbuffer.h
> index 73cc80e01cef..18cd25e489b8 100644
> --- a/kernel/printk/printk_ringbuffer.h
> +++ b/kernel/printk/printk_ringbuffer.h
> @@ -75,6 +75,7 @@ struct prb_desc_ring {
>  	struct printk_info	*infos;
>  	atomic_long_t		head_id;
>  	atomic_long_t		tail_id;
> +	atomic_long_t		last_finalized_id;
>  };


I really know nothing about this code, but while looking around
kernel/printk/ I noticed kernel/printk/printk.c has these lines in
log_buf_vmcoreinfo_setup().

	VMCOREINFO_STRUCT_SIZE(prb_desc_ring);
	VMCOREINFO_OFFSET(prb_desc_ring, count_bits);
	VMCOREINFO_OFFSET(prb_desc_ring, descs);
	VMCOREINFO_OFFSET(prb_desc_ring, infos);
	VMCOREINFO_OFFSET(prb_desc_ring, head_id);
	VMCOREINFO_OFFSET(prb_desc_ring, tail_id);

Would this header file change also require a change to that location?
Something like

	VMCOREINFO_OFFSET(prb_desc_ring, head_id);
	VMCOREINFO_OFFSET(prb_desc_ring, tail_id);
+	VMCOREINFO_OFFSET(prb_desc_ring, last_finalized_id);

-Saravana

>  
>  /*
> @@ -258,6 +259,7 @@ static struct printk_ringbuffer name = {							\
>  		.infos		= &_##name##_infos[0],						\
>  		.head_id	= ATOMIC_INIT(DESC0_ID(descbits)),				\
>  		.tail_id	= ATOMIC_INIT(DESC0_ID(descbits)),				\
> +		.last_finalized_id = ATOMIC_INIT(DESC0_ID(descbits)),				\
>  	},											\
>  	.text_data_ring = {									\
>  		.size_bits	= (avgtextbits) + (descbits),					\
> -- 
> 2.26.2
> 

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek