From: Fabien Parent <fparent@baylibre.com>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>
Cc: Fabien Parent <fparent@baylibre.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH 2/7] arm64: dts: mediatek: mt8195: add ssusb support
Date: Tue, 26 Apr 2022 15:41:00 +0200 [thread overview]
Message-ID: <20220426134106.242353-3-fparent@baylibre.com> (raw)
In-Reply-To: <20220426134106.242353-1-fparent@baylibre.com>
Add SSUSB support for MT8195. In order to not break any boards, this
commit also enable SSUSB for every board that has xhci0 enabled. The
boards are configured as host-only, in order to not change the current
behavior of the interface.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
---
arch/arm64/boot/dts/mediatek/mt8195-demo.dts | 5 +++
arch/arm64/boot/dts/mediatek/mt8195-evb.dts | 5 +++
arch/arm64/boot/dts/mediatek/mt8195.dtsi | 37 ++++++++++++++------
3 files changed, 36 insertions(+), 11 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
index 66037462263e..08cab3b3943b 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
@@ -402,6 +402,11 @@ &pmic {
interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
};
+&ssusb {
+ dr_mode = "host";
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-evb.dts b/arch/arm64/boot/dts/mediatek/mt8195-evb.dts
index db25a515e420..d49ae8605e67 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-evb.dts
@@ -138,6 +138,11 @@ pins {
};
};
+&ssusb {
+ dr_mode = "host";
+ status = "okay";
+};
+
&u3phy0 {
status="okay";
};
diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 2a525c1c74ef..aa05071a80b8 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -912,25 +912,40 @@ spis1: spi@1101e000 {
status = "disabled";
};
- xhci0: usb@11200000 {
- compatible = "mediatek,mt8195-xhci",
- "mediatek,mtk-xhci";
- reg = <0 0x11200000 0 0x1000>,
+ ssusb: usb@11201000 {
+ compatible ="mediatek,mt8195-mtu3", "mediatek,mtu3";
+ reg = <0 0x11201000 0 0x2dff>,
<0 0x11203e00 0 0x0100>;
reg-names = "mac", "ippc";
- interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH 0>;
phys = <&u2port0 PHY_TYPE_USB2>,
<&u3port0 PHY_TYPE_USB3>;
- assigned-clocks = <&topckgen CLK_TOP_USB_TOP>,
- <&topckgen CLK_TOP_SSUSB_XHCI>;
- assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
- <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB>,
<&topckgen CLK_TOP_SSUSB_REF>,
- <&apmixedsys CLK_APMIXED_USB1PLL>,
<&infracfg_ao CLK_INFRA_AO_SSUSB_XHCI>;
- clock-names = "sys_ck", "ref_ck", "mcu_ck", "xhci_ck";
+ clock-names = "sys_ck", "ref_ck", "mcu_ck";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
status = "disabled";
+
+ xhci0: usb@11200000 {
+ compatible = "mediatek,mt8195-xhci",
+ "mediatek,mtk-xhci";
+ reg = <0 0x11200000 0 0x1000>;
+ reg-names = "mac";
+ interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH 0>;
+ assigned-clocks = <&topckgen CLK_TOP_USB_TOP>,
+ <&topckgen CLK_TOP_SSUSB_XHCI>;
+ assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+ <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+ clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB>,
+ <&topckgen CLK_TOP_SSUSB_REF>,
+ <&apmixedsys CLK_APMIXED_USB1PLL>,
+ <&infracfg_ao CLK_INFRA_AO_SSUSB_XHCI>;
+ clock-names = "sys_ck", "ref_ck", "mcu_ck", "xhci_ck";
+ status = "disabled";
+ };
};
mmc0: mmc@11230000 {
--
2.36.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
next prev parent reply other threads:[~2022-04-26 13:43 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-26 13:40 [PATCH 0/7] arm64: dts: mediatek: mt8195-demo: Add more peripheral support Fabien Parent
2022-04-26 13:40 ` [PATCH 1/7] dt-bindings: usb: mediatek, mtu3: add binding for MT8195 SoC Fabien Parent
2022-04-27 6:12 ` Macpaul Lin
2022-04-28 7:53 ` [PATCH 1/7] dt-bindings: usb: mediatek,mtu3: " Krzysztof Kozlowski
2022-04-26 13:41 ` Fabien Parent [this message]
2022-04-26 13:41 ` [PATCH 3/7] arm64: dts: mediatek: mt8195: add ethernet device node Fabien Parent
2022-04-27 6:16 ` Macpaul Lin
2022-04-26 13:41 ` [PATCH 4/7] arm64: dts: mediatek: mt8195-evb: enable ethernet Fabien Parent
2022-04-26 13:41 ` [PATCH 5/7] arm64: dts: mediatek: mt8195-demo: " Fabien Parent
2022-04-27 6:25 ` Macpaul Lin
2022-04-29 14:00 ` Matthias Brugger
2022-04-29 15:22 ` Fabien Parent
2022-05-06 9:11 ` Macpaul Lin
2022-04-26 13:41 ` [PATCH 6/7] arm64: dts: mediatek: mt8195-demo: Remove input-name property Fabien Parent
2022-04-26 13:41 ` [PATCH 7/7] arm64: dts: mediatek: mt8195-demo: enable uart1 Fabien Parent
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220426134106.242353-3-fparent@baylibre.com \
--to=fparent@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox