From: Alexander Stein <alexander.stein@ew.tq-group.com>
To: "MyungJoo Ham" <myungjoo.ham@samsung.com>,
"Chanwoo Choi" <cw00.choi@samsung.com>,
"Rob Herring" <robh+dt@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Benoît Cousson" <bcousson@baylibre.com>,
"Tony Lindgren" <tony@atomide.com>,
"Shawn Guo" <shawnguo@kernel.org>,
"Sascha Hauer" <s.hauer@pengutronix.de>,
"Fabio Estevam" <festevam@gmail.com>,
"Matthias Brugger" <matthias.bgg@gmail.com>,
"AngeloGioacchino Del Regno"
<angelogioacchino.delregno@collabora.com>,
"Andy Gross" <agross@kernel.org>,
"Bjorn Andersson" <andersson@kernel.org>,
"Konrad Dybcio" <konrad.dybcio@linaro.org>,
"Heiko Stuebner" <heiko@sntech.de>
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
NXP Linux Team <linux-imx@nxp.com>,
devicetree@vger.kernel.org, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org,
linux-arm-msm@vger.kernel.org,
linux-rockchip@lists.infradead.org
Subject: [PATCH 2/3] ARM: dts: Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties
Date: Thu, 8 Jun 2023 10:11:52 +0200 [thread overview]
Message-ID: <20230608081153.441455-2-alexander.stein@ew.tq-group.com> (raw)
In-Reply-To: <20230608081153.441455-1-alexander.stein@ew.tq-group.com>
Use id-gpios and vbus-gpios instead.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
arch/arm/boot/dts/am571x-idk.dts | 4 ++--
arch/arm/boot/dts/am5729-beagleboneai.dts | 2 +-
arch/arm/boot/dts/am572x-idk-common.dtsi | 4 ++--
arch/arm/boot/dts/dra7-evm-common.dtsi | 4 ++--
arch/arm/boot/dts/dra71-evm.dts | 4 ++--
arch/arm/boot/dts/dra72-evm-common.dtsi | 4 ++--
arch/arm/boot/dts/dra76-evm.dts | 4 ++--
arch/arm/boot/dts/imx6qdl-colibri.dtsi | 2 +-
arch/arm/boot/dts/imx7-colibri.dtsi | 2 +-
9 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts
index 48425020281a9..322cf79d22e99 100644
--- a/arch/arm/boot/dts/am571x-idk.dts
+++ b/arch/arm/boot/dts/am571x-idk.dts
@@ -168,8 +168,8 @@ blue3-led {
};
&extcon_usb2 {
- id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
- vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>;
+ id-gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+ vbus-gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>;
};
&sn65hvs882 {
diff --git a/arch/arm/boot/dts/am5729-beagleboneai.dts b/arch/arm/boot/dts/am5729-beagleboneai.dts
index 149cfafb90bfc..c5272302eb11a 100644
--- a/arch/arm/boot/dts/am5729-beagleboneai.dts
+++ b/arch/arm/boot/dts/am5729-beagleboneai.dts
@@ -197,7 +197,7 @@ brcmf_pwrseq: brcmf_pwrseq {
extcon_usb1: extcon_usb1 {
compatible = "linux,extcon-usb-gpio";
ti,enable-id-detection;
- id-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+ id-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
};
};
diff --git a/arch/arm/boot/dts/am572x-idk-common.dtsi b/arch/arm/boot/dts/am572x-idk-common.dtsi
index 1d66278c3a722..3fca84819dc0c 100644
--- a/arch/arm/boot/dts/am572x-idk-common.dtsi
+++ b/arch/arm/boot/dts/am572x-idk-common.dtsi
@@ -169,8 +169,8 @@ blue3-led {
};
&extcon_usb2 {
- id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
- vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
+ id-gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+ vbus-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>;
};
&sn65hvs882 {
diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi b/arch/arm/boot/dts/dra7-evm-common.dtsi
index 4cdffd6db7407..ed5199d7acd84 100644
--- a/arch/arm/boot/dts/dra7-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra7-evm-common.dtsi
@@ -15,12 +15,12 @@ chosen {
extcon_usb1: extcon_usb1 {
compatible = "linux,extcon-usb-gpio";
- id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
+ id-gpios = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
};
extcon_usb2: extcon_usb2 {
compatible = "linux,extcon-usb-gpio";
- id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
+ id-gpios = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
};
sound0: sound0 {
diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts
index a643644430315..f747ac56eb927 100644
--- a/arch/arm/boot/dts/dra71-evm.dts
+++ b/arch/arm/boot/dts/dra71-evm.dts
@@ -293,11 +293,11 @@ &hdmi {
};
&extcon_usb1 {
- vbus-gpio = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
+ vbus-gpios = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
};
&extcon_usb2 {
- vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
+ vbus-gpios = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
};
&ipu2 {
diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
index 31ab0c60ca75e..f8151c61488e1 100644
--- a/arch/arm/boot/dts/dra72-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
@@ -96,12 +96,12 @@ evm_3v3_sd: fixedregulator-sd {
extcon_usb1: extcon_usb1 {
compatible = "linux,extcon-usb-gpio";
- id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
+ id-gpios = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
};
extcon_usb2: extcon_usb2 {
compatible = "linux,extcon-usb-gpio";
- id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
+ id-gpios = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
};
hdmi0: connector {
diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
index 57868ac60d298..cf9c3d35b0499 100644
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -533,11 +533,11 @@ &pcie1_ep {
};
&extcon_usb1 {
- vbus-gpio = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
+ vbus-gpios = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
};
&extcon_usb2 {
- vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
+ vbus-gpios = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
};
&m_can0 {
diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
index 5709957075044..11d9c7a2dacb1 100644
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -26,7 +26,7 @@ backlight: backlight {
extcon_usbc_det: usbc-det {
compatible = "linux,extcon-usb-gpio";
- id-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */
+ id-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbc_det>;
};
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index 104580d51d745..9fe51884af79f 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -29,7 +29,7 @@ chosen {
extcon_usbc_det: usbc-det {
compatible = "linux,extcon-usb-gpio";
- id-gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */
+ id-gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbc_det>;
};
--
2.34.1
next prev parent reply other threads:[~2023-06-08 8:12 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-08 8:11 [PATCH 1/3] dt-bindings: extcon-usb-gpio: convert to DT schema format Alexander Stein
2023-06-08 8:11 ` Alexander Stein [this message]
2023-06-08 8:11 ` [PATCH 3/3] arm64: dts: Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties Alexander Stein
2023-06-08 8:21 ` Heiko Stübner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230608081153.441455-2-alexander.stein@ew.tq-group.com \
--to=alexander.stein@ew.tq-group.com \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=angelogioacchino.delregno@collabora.com \
--cc=bcousson@baylibre.com \
--cc=conor+dt@kernel.org \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=heiko@sntech.de \
--cc=kernel@pengutronix.de \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=myungjoo.ham@samsung.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox