From: "Arınç ÜNAL" <arinc.unal@arinc9.com>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>
Cc: devicetree@vger.kernel.org, mithat.guner@xeront.com,
"Arınç ÜNAL" <arinc.unal@arinc9.com>,
linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org,
erkin.bozoglu@xeront.com, linux-arm-kernel@lists.infradead.org,
"AngeloGioacchino Del Regno"
<angelogioacchino.delregno@collabora.com>
Subject: [PATCH] arm64: dts: {mt7622,mt7986}: add port@5 as CPU port
Date: Mon, 18 Sep 2023 10:49:38 +0300 [thread overview]
Message-ID: <20230918074938.79796-1-arinc.unal@arinc9.com> (raw)
On Banana Pi BPI-R64, MediaTek MT7622 RFB1 board, MediaTek MT7986b RFB, and
MediaTek MT7986a RFB, port 5 of the MT7531 switch is connected to the
second MAC of the SoC as a CPU port. Add the port and set up the second MAC
on the bindings.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
.../dts/mediatek/mt7622-bananapi-bpi-r64.dts | 12 ++++++++++
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 24 +++++++++++++++++++
arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 24 +++++++++++++++++++
arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts | 24 +++++++++++++++++++
4 files changed, 84 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
index 86cedb0bf1a9..f2cc95d4a343 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -186,6 +186,18 @@ port@4 {
label = "lan3";
};
+ port@5 {
+ reg = <5>;
+ ethernet = <&gmac1>;
+ phy-mode = "rgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
+ };
+
port@6 {
reg = <6>;
label = "cpu";
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index dad8e683aac5..018912964b32 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -117,6 +117,18 @@ fixed-link {
};
};
+ gmac1: mac@1 {
+ compatible = "mediatek,eth-mac";
+ reg = <1>;
+ phy-mode = "rgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
+ };
+
mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
@@ -155,6 +167,18 @@ port@4 {
label = "wan";
};
+ port@5 {
+ reg = <5>;
+ ethernet = <&gmac1>;
+ phy-mode = "rgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
+ };
+
port@6 {
reg = <6>;
label = "cpu";
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
index 3ef371ca254e..3aba067f56b6 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
@@ -65,6 +65,18 @@ fixed-link {
};
};
+ gmac1: mac@1 {
+ compatible = "mediatek,eth-mac";
+ reg = <1>;
+ phy-mode = "rgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
+ };
+
mdio: mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
@@ -287,6 +299,18 @@ port@4 {
label = "lan4";
};
+ port@5 {
+ reg = <5>;
+ ethernet = <&gmac1>;
+ phy-mode = "rgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
+ };
+
port@6 {
reg = <6>;
label = "cpu";
diff --git a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
index dde190442e38..89ca852a9854 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
@@ -45,6 +45,18 @@ fixed-link {
};
};
+ gmac1: mac@1 {
+ compatible = "mediatek,eth-mac";
+ reg = <1>;
+ phy-mode = "rgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
+ };
+
mdio: mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
@@ -83,6 +95,18 @@ port@4 {
label = "lan4";
};
+ port@5 {
+ reg = <5>;
+ ethernet = <&gmac1>;
+ phy-mode = "rgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
+ };
+
port@6 {
reg = <6>;
label = "cpu";
--
2.39.2
next reply other threads:[~2023-09-18 7:49 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-18 7:49 Arınç ÜNAL [this message]
2024-02-18 10:52 ` [PATCH] arm64: dts: {mt7622,mt7986}: add port@5 as CPU port Arınç ÜNAL
2024-02-19 9:17 ` AngeloGioacchino Del Regno
2024-02-19 9:38 ` Arınç ÜNAL
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230918074938.79796-1-arinc.unal@arinc9.com \
--to=arinc.unal@arinc9.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=erkin.bozoglu@xeront.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=mithat.guner@xeront.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox