From: Shayne Chen <shayne.chen@mediatek.com>
To: Felix Fietkau <nbd@nbd.name>
Cc: linux-wireless <linux-wireless@vger.kernel.org>,
Lorenzo Bianconi <lorenzo@kernel.org>,
Ryder Lee <ryder.lee@mediatek.com>,
Evelyn Tsai <evelyn.tsai@mediatek.com>,
Bo Jiao <Bo.Jiao@mediatek.com>,
linux-mediatek <linux-mediatek@lists.infradead.org>,
StanleyYP Wang <StanleyYP.Wang@mediatek.com>,
Shayne Chen <shayne.chen@mediatek.com>
Subject: [PATCH 4/8] wifi: mt76: mt7996: rework register offsets for mt7992
Date: Mon, 13 Nov 2023 15:06:15 +0800 [thread overview]
Message-ID: <20231113070619.19964-5-shayne.chen@mediatek.com> (raw)
In-Reply-To: <20231113070619.19964-1-shayne.chen@mediatek.com>
From: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Add mt7992_offs to differentiate registers that share the same
definitions with mt7996 chipsets but have differnet offsets.
This is a preliminary patch for mt7992 chipsets support.
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
---
.../net/wireless/mediatek/mt76/mt7996/mmio.c | 59 ++++++++++++++
.../net/wireless/mediatek/mt76/mt7996/regs.h | 76 +++++++++++++------
2 files changed, 112 insertions(+), 23 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mmio.c b/drivers/net/wireless/mediatek/mt76/mt7996/mmio.c
index 739d7f53d347..b1119f62c946 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/mmio.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/mmio.c
@@ -30,6 +30,58 @@ static const struct __base mt7996_reg_base[] = {
[WF_RATE_BASE] = { { 0x820ee000, 0x820fe000, 0x830ee000 } },
};
+static const u32 mt7996_offs[] = {
+ [MIB_RVSR0] = 0x720,
+ [MIB_RVSR1] = 0x724,
+ [MIB_BTSCR5] = 0x788,
+ [MIB_BTSCR6] = 0x798,
+ [MIB_RSCR1] = 0x7ac,
+ [MIB_RSCR27] = 0x954,
+ [MIB_RSCR28] = 0x958,
+ [MIB_RSCR29] = 0x95c,
+ [MIB_RSCR30] = 0x960,
+ [MIB_RSCR31] = 0x964,
+ [MIB_RSCR33] = 0x96c,
+ [MIB_RSCR35] = 0x974,
+ [MIB_RSCR36] = 0x978,
+ [MIB_BSCR0] = 0x9cc,
+ [MIB_BSCR1] = 0x9d0,
+ [MIB_BSCR2] = 0x9d4,
+ [MIB_BSCR3] = 0x9d8,
+ [MIB_BSCR4] = 0x9dc,
+ [MIB_BSCR5] = 0x9e0,
+ [MIB_BSCR6] = 0x9e4,
+ [MIB_BSCR7] = 0x9e8,
+ [MIB_BSCR17] = 0xa10,
+ [MIB_TRDR1] = 0xa28,
+};
+
+static const u32 mt7992_offs[] = {
+ [MIB_RVSR0] = 0x760,
+ [MIB_RVSR1] = 0x764,
+ [MIB_BTSCR5] = 0x7c8,
+ [MIB_BTSCR6] = 0x7d8,
+ [MIB_RSCR1] = 0x7f0,
+ [MIB_RSCR27] = 0x998,
+ [MIB_RSCR28] = 0x99c,
+ [MIB_RSCR29] = 0x9a0,
+ [MIB_RSCR30] = 0x9a4,
+ [MIB_RSCR31] = 0x9a8,
+ [MIB_RSCR33] = 0x9b0,
+ [MIB_RSCR35] = 0x9b8,
+ [MIB_RSCR36] = 0x9bc,
+ [MIB_BSCR0] = 0xac8,
+ [MIB_BSCR1] = 0xacc,
+ [MIB_BSCR2] = 0xad0,
+ [MIB_BSCR3] = 0xad4,
+ [MIB_BSCR4] = 0xad8,
+ [MIB_BSCR5] = 0xadc,
+ [MIB_BSCR6] = 0xae0,
+ [MIB_BSCR7] = 0xae4,
+ [MIB_BSCR17] = 0xb0c,
+ [MIB_TRDR1] = 0xb24,
+};
+
static const struct __map mt7996_reg_map[] = {
{ 0x54000000, 0x02000, 0x1000 }, /* WFDMA_0 (PCIE0 MCU DMA0) */
{ 0x55000000, 0x03000, 0x1000 }, /* WFDMA_1 (PCIE0 MCU DMA1) */
@@ -382,6 +434,13 @@ static int mt7996_mmio_init(struct mt76_dev *mdev,
switch (device_id) {
case 0x7990:
dev->reg.base = mt7996_reg_base;
+ dev->reg.offs_rev = mt7996_offs;
+ dev->reg.map = mt7996_reg_map;
+ dev->reg.map_size = ARRAY_SIZE(mt7996_reg_map);
+ break;
+ case 0x7992:
+ dev->reg.base = mt7996_reg_base;
+ dev->reg.offs_rev = mt7992_offs;
dev->reg.map = mt7996_reg_map;
dev->reg.map_size = ARRAY_SIZE(mt7996_reg_map);
break;
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/regs.h b/drivers/net/wireless/mediatek/mt76/mt7996/regs.h
index 6623a6ba12d6..21637e3aae42 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/regs.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/regs.h
@@ -19,6 +19,7 @@ struct __base {
/* used to differentiate between generations */
struct mt7996_reg_desc {
const struct __base *base;
+ const u32 *offs_rev;
const struct __map *map;
u32 map_size;
};
@@ -39,6 +40,35 @@ enum base_rev {
#define __BASE(_id, _band) (dev->reg.base[(_id)].band_base[(_band)])
+enum offs_rev {
+ MIB_RVSR0,
+ MIB_RVSR1,
+ MIB_BTSCR5,
+ MIB_BTSCR6,
+ MIB_RSCR1,
+ MIB_RSCR27,
+ MIB_RSCR28,
+ MIB_RSCR29,
+ MIB_RSCR30,
+ MIB_RSCR31,
+ MIB_RSCR33,
+ MIB_RSCR35,
+ MIB_RSCR36,
+ MIB_BSCR0,
+ MIB_BSCR1,
+ MIB_BSCR2,
+ MIB_BSCR3,
+ MIB_BSCR4,
+ MIB_BSCR5,
+ MIB_BSCR6,
+ MIB_BSCR7,
+ MIB_BSCR17,
+ MIB_TRDR1,
+ __MT_OFFS_MAX,
+};
+
+#define __OFFS(id) (dev->reg.offs_rev[(id)])
+
/* RRO TOP */
#define MT_RRO_TOP_BASE 0xA000
#define MT_RRO_TOP(ofs) (MT_RRO_TOP_BASE + (ofs))
@@ -178,32 +208,32 @@ enum base_rev {
#define MT_WF_MIB_BASE(_band) __BASE(WF_MIB_BASE, (_band))
#define MT_WF_MIB(_band, ofs) (MT_WF_MIB_BASE(_band) + (ofs))
-#define MT_MIB_BSCR0(_band) MT_WF_MIB(_band, 0x9cc)
-#define MT_MIB_BSCR1(_band) MT_WF_MIB(_band, 0x9d0)
-#define MT_MIB_BSCR2(_band) MT_WF_MIB(_band, 0x9d4)
-#define MT_MIB_BSCR3(_band) MT_WF_MIB(_band, 0x9d8)
-#define MT_MIB_BSCR4(_band) MT_WF_MIB(_band, 0x9dc)
-#define MT_MIB_BSCR5(_band) MT_WF_MIB(_band, 0x9e0)
-#define MT_MIB_BSCR6(_band) MT_WF_MIB(_band, 0x9e4)
-#define MT_MIB_BSCR7(_band) MT_WF_MIB(_band, 0x9e8)
-#define MT_MIB_BSCR17(_band) MT_WF_MIB(_band, 0xa10)
+#define MT_MIB_BSCR0(_band) MT_WF_MIB(_band, __OFFS(MIB_BSCR0))
+#define MT_MIB_BSCR1(_band) MT_WF_MIB(_band, __OFFS(MIB_BSCR1))
+#define MT_MIB_BSCR2(_band) MT_WF_MIB(_band, __OFFS(MIB_BSCR2))
+#define MT_MIB_BSCR3(_band) MT_WF_MIB(_band, __OFFS(MIB_BSCR3))
+#define MT_MIB_BSCR4(_band) MT_WF_MIB(_band, __OFFS(MIB_BSCR4))
+#define MT_MIB_BSCR5(_band) MT_WF_MIB(_band, __OFFS(MIB_BSCR5))
+#define MT_MIB_BSCR6(_band) MT_WF_MIB(_band, __OFFS(MIB_BSCR6))
+#define MT_MIB_BSCR7(_band) MT_WF_MIB(_band, __OFFS(MIB_BSCR7))
+#define MT_MIB_BSCR17(_band) MT_WF_MIB(_band, __OFFS(MIB_BSCR17))
#define MT_MIB_TSCR5(_band) MT_WF_MIB(_band, 0x6c4)
#define MT_MIB_TSCR6(_band) MT_WF_MIB(_band, 0x6c8)
#define MT_MIB_TSCR7(_band) MT_WF_MIB(_band, 0x6d0)
-#define MT_MIB_RSCR1(_band) MT_WF_MIB(_band, 0x7ac)
+#define MT_MIB_RSCR1(_band) MT_WF_MIB(_band, __OFFS(MIB_RSCR1))
/* rx mpdu counter, full 32 bits */
-#define MT_MIB_RSCR31(_band) MT_WF_MIB(_band, 0x964)
-#define MT_MIB_RSCR33(_band) MT_WF_MIB(_band, 0x96c)
+#define MT_MIB_RSCR31(_band) MT_WF_MIB(_band, __OFFS(MIB_RSCR31))
+#define MT_MIB_RSCR33(_band) MT_WF_MIB(_band, __OFFS(MIB_RSCR33))
#define MT_MIB_SDR6(_band) MT_WF_MIB(_band, 0x020)
#define MT_MIB_SDR6_CHANNEL_IDL_CNT_MASK GENMASK(15, 0)
-#define MT_MIB_RVSR0(_band) MT_WF_MIB(_band, 0x720)
+#define MT_MIB_RVSR0(_band) MT_WF_MIB(_band, __OFFS(MIB_RVSR0))
-#define MT_MIB_RSCR35(_band) MT_WF_MIB(_band, 0x974)
-#define MT_MIB_RSCR36(_band) MT_WF_MIB(_band, 0x978)
+#define MT_MIB_RSCR35(_band) MT_WF_MIB(_band, __OFFS(MIB_RSCR35))
+#define MT_MIB_RSCR36(_band) MT_WF_MIB(_band, __OFFS(MIB_RSCR36))
/* tx ampdu cnt, full 32 bits */
#define MT_MIB_TSCR0(_band) MT_WF_MIB(_band, 0x6b0)
@@ -216,16 +246,16 @@ enum base_rev {
#define MT_MIB_TSCR4(_band) MT_WF_MIB(_band, 0x6c0)
/* rx ampdu count, 32-bit */
-#define MT_MIB_RSCR27(_band) MT_WF_MIB(_band, 0x954)
+#define MT_MIB_RSCR27(_band) MT_WF_MIB(_band, __OFFS(MIB_RSCR27))
/* rx ampdu bytes count, 32-bit */
-#define MT_MIB_RSCR28(_band) MT_WF_MIB(_band, 0x958)
+#define MT_MIB_RSCR28(_band) MT_WF_MIB(_band, __OFFS(MIB_RSCR28))
/* rx ampdu valid subframe count */
-#define MT_MIB_RSCR29(_band) MT_WF_MIB(_band, 0x95c)
+#define MT_MIB_RSCR29(_band) MT_WF_MIB(_band, __OFFS(MIB_RSCR29))
/* rx ampdu valid subframe bytes count, 32bits */
-#define MT_MIB_RSCR30(_band) MT_WF_MIB(_band, 0x960)
+#define MT_MIB_RSCR30(_band) MT_WF_MIB(_band, __OFFS(MIB_RSCR30))
/* remaining windows protected stats */
#define MT_MIB_SDR27(_band) MT_WF_MIB(_band, 0x080)
@@ -234,18 +264,18 @@ enum base_rev {
#define MT_MIB_SDR28(_band) MT_WF_MIB(_band, 0x084)
#define MT_MIB_SDR28_TX_RWP_NEED_CNT GENMASK(15, 0)
-#define MT_MIB_RVSR1(_band) MT_WF_MIB(_band, 0x724)
+#define MT_MIB_RVSR1(_band) MT_WF_MIB(_band, __OFFS(MIB_RVSR1))
/* rx blockack count, 32 bits */
#define MT_MIB_TSCR1(_band) MT_WF_MIB(_band, 0x6b4)
#define MT_MIB_BTSCR0(_band) MT_WF_MIB(_band, 0x5e0)
-#define MT_MIB_BTSCR5(_band) MT_WF_MIB(_band, 0x788)
-#define MT_MIB_BTSCR6(_band) MT_WF_MIB(_band, 0x798)
+#define MT_MIB_BTSCR5(_band) MT_WF_MIB(_band, __OFFS(MIB_BTSCR5))
+#define MT_MIB_BTSCR6(_band) MT_WF_MIB(_band, __OFFS(MIB_BTSCR6))
#define MT_MIB_BFTFCR(_band) MT_WF_MIB(_band, 0x5d0)
-#define MT_TX_AGG_CNT(_band, n) MT_WF_MIB(_band, 0xa28 + ((n) << 2))
+#define MT_TX_AGG_CNT(_band, n) MT_WF_MIB(_band, __OFFS(MIB_TRDR1) + ((n) << 2))
#define MT_MIB_ARNG(_band, n) MT_WF_MIB(_band, 0x0b0 + ((n) << 2))
#define MT_MIB_ARNCR_RANGE(val, n) (((val) >> ((n) << 4)) & GENMASK(9, 0))
--
2.39.2
next prev parent reply other threads:[~2023-11-13 7:07 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-13 7:06 [PATCH 0/8] Add MT7992 support Shayne Chen
2023-11-13 7:06 ` [PATCH 1/8] wifi: mt76: mt7996: introduce mt7996_band_valid() Shayne Chen
2023-11-13 7:06 ` [PATCH 2/8] wifi: mt76: connac: add firmware support for mt7992 Shayne Chen
2023-11-13 7:06 ` [PATCH 3/8] wifi: mt76: mt7996: add DMA " Shayne Chen
2023-11-13 7:06 ` Shayne Chen [this message]
2023-11-13 7:06 ` [PATCH 5/8] wifi: mt76: mt7996: support mt7992 eeprom loading Shayne Chen
2023-11-13 11:08 ` Lorenzo Bianconi
2023-11-13 7:06 ` [PATCH 6/8] wifi: mt76: mt7996: adjust interface num and wtbl size for mt7992 Shayne Chen
2023-11-13 7:06 ` [PATCH 7/8] wifi: mt76: connac: add new definition of tx descriptor Shayne Chen
2023-11-13 7:06 ` [PATCH 8/8] wifi: mt76: mt7996: add PCI IDs for mt7992 Shayne Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231113070619.19964-5-shayne.chen@mediatek.com \
--to=shayne.chen@mediatek.com \
--cc=Bo.Jiao@mediatek.com \
--cc=StanleyYP.Wang@mediatek.com \
--cc=evelyn.tsai@mediatek.com \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=lorenzo@kernel.org \
--cc=nbd@nbd.name \
--cc=ryder.lee@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox