From: "Rafał Miłecki" <zajec5@gmail.com>
To: AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jiri Slaby <jirislaby@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-serial@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org,
"Rafał Miłecki" <rafal@milecki.pl>
Subject: [PATCH 2/2] arm64: dts: mediatek: mt7988: add UART controllers
Date: Wed, 5 Jun 2024 10:54:33 +0200 [thread overview]
Message-ID: <20240605085433.26513-2-zajec5@gmail.com> (raw)
In-Reply-To: <20240605085433.26513-1-zajec5@gmail.com>
From: Rafał Miłecki <rafal@milecki.pl>
MT7988 has three on-SoC UART controllers that support M16C450 and
M16550A modes.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
arch/arm64/boot/dts/mediatek/mt7988a.dtsi | 35 ++++++++++++++++++++++-
1 file changed, 34 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
index aa728331e876..7690a83911af 100644
--- a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
@@ -86,7 +86,7 @@ infracfg: clock-controller@10001000 {
#clock-cells = <1>;
};
- clock-controller@1001b000 {
+ topckgen: clock-controller@1001b000 {
compatible = "mediatek,mt7988-topckgen", "syscon";
reg = <0 0x1001b000 0 0x1000>;
#clock-cells = <1>;
@@ -124,6 +124,39 @@ pwm@10048000 {
status = "disabled";
};
+ serial@11000000 {
+ compatible = "mediatek,mt7988-uart", "mediatek,mt6577-uart";
+ reg = <0 0x11000000 0 0x100>;
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uart", "wakeup";
+ clocks = <&topckgen CLK_TOP_UART_SEL>,
+ <&infracfg CLK_INFRA_52M_UART0_CK>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ serial@11000100 {
+ compatible = "mediatek,mt7988-uart", "mediatek,mt6577-uart";
+ reg = <0 0x11000100 0 0x100>;
+ interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uart", "wakeup";
+ clocks = <&topckgen CLK_TOP_UART_SEL>,
+ <&infracfg CLK_INFRA_52M_UART1_CK>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ serial@11000200 {
+ compatible = "mediatek,mt7988-uart", "mediatek,mt6577-uart";
+ reg = <0 0x11000200 0 0x100>;
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uart", "wakeup";
+ clocks = <&topckgen CLK_TOP_UART_SEL>,
+ <&infracfg CLK_INFRA_52M_UART2_CK>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
i2c@11003000 {
compatible = "mediatek,mt7981-i2c";
reg = <0 0x11003000 0 0x1000>,
--
2.35.3
next prev parent reply other threads:[~2024-06-05 8:55 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-05 8:54 [PATCH 1/2] dt-bindings: serial: mediatek,uart: add MT7988 Rafał Miłecki
2024-06-05 8:54 ` Rafał Miłecki [this message]
2024-06-05 11:28 ` [PATCH 2/2] arm64: dts: mediatek: mt7988: add UART controllers AngeloGioacchino Del Regno
2024-06-05 11:28 ` [PATCH 1/2] dt-bindings: serial: mediatek,uart: add MT7988 AngeloGioacchino Del Regno
2024-06-05 17:01 ` Conor Dooley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240605085433.26513-2-zajec5@gmail.com \
--to=zajec5@gmail.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jirislaby@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-serial@vger.kernel.org \
--cc=matthias.bgg@gmail.com \
--cc=rafal@milecki.pl \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox